Black Emblem Kit: www.collegehillshonda.com/pro... Gloss Black "SPORT" Emblem: www.collegehillshonda.com/6th... Black "Touring" Emblem: www.collegehillshonda.com/6th...
Жүктеу.....
Пікірлер: 124
@TuroVJ Жыл бұрын
Buddy barely got his car and he’s already modifying it!!! I respect that! 🤝
@IvanRossS
Жыл бұрын
Yep that how you do it lol. I modified all my cars and updated audio system, brakes etc. on my old RAV4 i had.
@seanbaril7901
6 ай бұрын
@@IvanRossS haven't even picked up my new CRV yet, and already ordering stuff for it 🍻👍
@HishamElSheshtawy Жыл бұрын
What a great, helpful, to-the-point, quality video. Thank you! This is exactly what I’ve been looking for.
@dabossatx5 Жыл бұрын
Great video and very clear instructions. Install went flawless and had no issues whatsoever thanks to you!
@IvanRossS
Жыл бұрын
Great to help, now you have quality made logos that will last you for years and you never have to repaint
@stephenkellervideos Жыл бұрын
Very well explained and looks great! I painted the emblem black on my 2016 crv without removing the trim just slowly pulling it out, luckily the washers fell out where the license plate lights are but this looks much more professional.
@partlycloudy531 Жыл бұрын
I recommend using painters tape before you remove the original emblems to line off the edges to help with putting the new ones on perfectly level in the exact same spot.
@nbraa
Жыл бұрын
that's what the 2 pegs are for
@partlycloudy531
Жыл бұрын
@@nbraa only the H has the pegs
@hectorelbomba Жыл бұрын
Wow thanks. It’s actually not as hard as you would think. The process is a little tedious but it’s doable
@andrewb9547Ай бұрын
Looks great!!! Thanks for sharing the how too.
@brucegilmore317010 ай бұрын
Very well explained --- THANKS. I almost didn't try this because of the challenges you had getting the rubber trim popped back out after putting the 6 inch painted trim piece (that the "H" symbol is connected to) back on. You used your plastic trim "pop off too"l to pry the rubber trim back out -- but you had what looked like a pretty tough challenge getting it back out of the seam. Instead of using your approach, I put a strip of painters tap -- glue side facing up -- over the rubber trim. Then put another strip of painters tape, covering 1/2 the width of the previous strip of tape (just to make the painters tape wider than I strip would provide), and then to pull the tape away from the work area, I put some small pieces of tape running straight up, onto the back window, to pull my strips of tape up and away. Once I got the 6" plastic trim piece snapped back onto the car, I just pulled the painters tape off the rubber trim, and it fell right back into place without being squeezed into the gap that you were struggling to get the rubber trim out of. Everything else worked great, just like you showed. Thanks again.
@IvanRossS
9 ай бұрын
That rubber seal was the worst part about whole job
@firefeature45
3 ай бұрын
Good idea!
@moealmak96667 ай бұрын
Looks so much better.
@superrcm338 ай бұрын
Great video, Thanks! Just ordered mine. Thinking about ripping and gluing the new one 🤔
@IvanRossS
8 ай бұрын
I heard people do that :)
@olivierm2108
7 ай бұрын
Where did you buy it from brother?
@dejaboom Жыл бұрын
After removing the emblems with floss you know it's much easier to just heat the remaining foam lightly with the heat gun and it would come off a lot easier vs. trying to manually roll it off with your fingers.
@CalvinHikes5 ай бұрын
Wow quite a bit of a pain! Good job.
@IvanRossS
5 ай бұрын
It was worth it :) I have not seen any CRV with blacked out emblems yet
@slothypunk Жыл бұрын
I just plastidip it black, works beautifully! Just took less than half an hour when and make sure your car is clean, that is it!
@IvanRossS
Жыл бұрын
Yes. But it's not going to less lol. I made it permanent. It will less for years. I was looking just to get dipped too but it's only less max 2 years or so. Paint will fade too. Car washes will pill it of slowly.
@slothypunk
Жыл бұрын
@@IvanRossS True, it only last maybe 3-4 years. If you hand wash your car it may last 5-6 years. How much you buy the blackened emblem btw?
@IvanRossS
Жыл бұрын
@@slothypunk all links in the discretion. And currently prices. I bought a kit
@slothypunk
Жыл бұрын
@@IvanRossS Thank you, I don't realize it in the description below
@yuzibo57173 ай бұрын
Amazing video! Would you like to test our new product glossy black front garnish overlays?
@Curlo2 Жыл бұрын
What is the stuff you used to take out the minor scratches you said?? After you used the winded?
@scottchildress898122 күн бұрын
Are the new emblems gloss black and the SPORT satin? Do they match?
@susanmccallcarrasco1348 Жыл бұрын
RearGate Insulation: pls post video! TY
@makb53543 ай бұрын
My goodness, what a pain for just swap little plastic letter. My Honda Passport is just pull the emblem of with plastic lever, clean the spot then push new one in.
@IvanRossS
Ай бұрын
I definitely agree with a pain in the butt but there is a way to get around it. By just simply pulling out and breaking H logo.. and replacing it with a new one But you have a chance to ruin some things. Put scratches on pain. And I believe 3M double tape not really going to hold it properly being so thin on the back of the new logo
@mardigras62210 ай бұрын
Excellent video! Thank you! 🇺🇦 🇺🇦
@bigallis110 ай бұрын
Excellent how to video. Thank you for doing it. One question, Is that blue nail polish you used to fill the letters in?
@IvanRossS
10 ай бұрын
Yes it was nail polish lol. So far it's holding up.
@bigallis1
10 ай бұрын
Thank you for the quick reply Ivan. That's what I'm going to use also. Pretty cheap to buy to. Less than $2.00 here in USA.@@IvanRossS
@IvanRossS
10 ай бұрын
@@bigallis1 I'm in US too :)
@billyrock83054 ай бұрын
Topgun modification video on the Topgun SUV. ❤️ 🇺🇦 🇨🇦
@Bathgate155 Жыл бұрын
Nice job! But "Hybrid" emblem was placed slightly slanted downward on the right side.
@IvanRossS
Жыл бұрын
No it's not it's just look like this the video
@HikaruIchijoe7 ай бұрын
Great video, but one important thing that you should do is make a template of the emblem prior to removal so you know exactly where to put it back instead of just eyeballing it like you did. Adjust horizontal position of the emblems as well with leveler tool while you were making a template coz sometime they are crooked straight from the factory.
@IvanRossS
7 ай бұрын
Couldn't because area was buffet and polished
@HikaruIchijoe
7 ай бұрын
@@IvanRossS Put masking tape around the emblem strategically from the taillights vertically and horizontally so you know exactly where the C starts or where the V Stops. Remove the masking tape before you do the removal or emblems and clean up, then lay the masking tape back on the trunk again so you now know exactly where to put the emblem back. Align the emblem horizontally by using a leveler and make adjustments if required. Emblems always appear crooked when it’s not aligned horizontally.
@mbarton3610 ай бұрын
Just plasti-dipped mine after seeing the pdf instructions on Honda site. Sport model has blacked out “sport badge” it should have the others blacked out from the factory
@IvanRossS
10 ай бұрын
Yeah I know. That's alot of work
@skytechm07 Жыл бұрын
What the tool name you use to heat the bubble
@CalvinHikes5 ай бұрын
What's crazy to me is there's a world in which people live that want Chrome emblems. I don't understand that at all.
@kramjtbnm231110 ай бұрын
More video trik for the crv hybrid
@TheYogimind9 ай бұрын
Great job. I have to say though that it is ridiculous Honda makes it that hard to simply change the emblem.
@IvanRossS
9 ай бұрын
Yes I was surprised too.. but just wanted to do it properly by the book and shoot a video about it
@TheYogimind
9 ай бұрын
@@IvanRossS and that…you did.
@kramjtbnm231110 ай бұрын
How much did you cost for all?
@babyjonny420 Жыл бұрын
Do you think its possible to access the H logo from the trunk handle below it?
@IvanRossS
Жыл бұрын
No lol. Of course not. You have to do all this job just to get to it . I know it's insane. But it's can be done as u see on the video
@slothypunk Жыл бұрын
Hey Ivan, just wondering if you check your CRV underbody? I know that Toyota has the thing called under body plug (under about in passenger and driver under body) that is part of PDI inspection to plug it in. Reason I asked is because mine didn't get installed and just wondering if you can look up yours and to see if you have the body plug installed? Thank you beforehand!
@ckez4724 Жыл бұрын
I wish someone could do a 2023 pilot emblem install???? PLEASEEEEE
@12Jsilva
Жыл бұрын
wanting to replace mine on my 23 trailsport. dunno why the badges are black but the H emblem is chrome
@Fadic4 Жыл бұрын
That middle one seems like such a pain, i don’t get why they didn’t have it glued on like the other ones.
@IvanRossS
Жыл бұрын
I was surprised to find out how much work need to be done when I ordered these emblems. But it was a great opportunity for a video 😀
@aramisbisono8231 Жыл бұрын
Give me the name of the blue that you painted the hybrid and the adhesive tape, please!!!
@IvanRossS
Жыл бұрын
Double tape was made by 3M. You can buy it at any hardware store And blue paint was simply nail polish... yes I know it's not a great choice lol. Because it's going to be on direct sun but we'll see how long it's going to last. But you can buy any enamel base blue paint. You can find a little small jars of this type of paint at the craft stores. For only few dollars
@toddmeadows1291
5 ай бұрын
Do you have Honda part# for the H and CR-V black emblems?? How about the front one??
@firefeature45
3 ай бұрын
@@toddmeadows1291 You probably have these, but maybe it will help someone else. The H and CR-V kit part #: 08F20-3A0-100
@TuroVJ Жыл бұрын
I’m curious tho! What’s the reason for the insulation!?!
@IvanRossS
Жыл бұрын
What do you mean what is the reason for insulation? You installing insulation to lower outside noise lol.
@sergiipiddubniak1568 Жыл бұрын
Дякую!
@IvanRossS
Жыл бұрын
Будь ласка :)
@NinjaAlex6r Жыл бұрын
Can you list the black and blue paint that you used?
@IvanRossS
Жыл бұрын
Black paint you can literally see in the video. Blue paint was nail polish
@NinjaAlex6r
Жыл бұрын
What type of blue was it? It was hard to see the name, also did you use the gorilla glue to stick back the hybrid logo? Thanks for the response
@namnguyen-xj3xl11 ай бұрын
Can u send me the link for buy the black one , please 😅
@IvanRossS
11 ай бұрын
Read description...
@victordiaz628410 ай бұрын
Where u got the crv logo? I can’t find in us
@IvanRossS
10 ай бұрын
You never read descriptions to the videos..... you can find a lot of useful information in that section ! all links in the description
@michaelfiss42823 күн бұрын
What about the H for the grill?
@IvanRossS
3 күн бұрын
@@michaelfiss4282 they don't have it because it's your front radar sensor
@user-ci8mi4fn7xАй бұрын
Ну красавчик 😍 за символику 🇺🇦 отдельный респект 👍
@alanlangendorf438911 ай бұрын
Have you blackout the front fake air vents yet
@frankpuma8778
11 ай бұрын
I just ordered those to replace mine. Garnish L Front Bumper 71157-3D4-A01 Garnish R Front Bumper 71152-3D4-A01
@IvanRossS
Ай бұрын
No. actually do not find them being ugly at all.
@demetriustatum67211 ай бұрын
That’s a lot of work the silver emblem is ok me personally I wouldn’t do that
@IvanRossS
11 ай бұрын
It is. But I did it properly. By the book. I have heard people yanked it out. By braking it off and just gluing new one back on.
@endlessthunder61618 ай бұрын
You make it look so easy to do🤣!
@IvanRossS
Ай бұрын
I know that was a ridiculous job but I was just trying to show people by the book how is done properly. Besides painting hybrid logo :)
@endlessthunder6161
Ай бұрын
@@IvanRossS i wanna do it but I’m scared of messing up
@NinjaAlex6r Жыл бұрын
Do you plan on doing the front emblem?
@IvanRossS
Жыл бұрын
You can't lol. Its a radar
@NinjaAlex6r
Жыл бұрын
😩😩 you think we can smoke it with light tint vinyl?
@IvanRossS
Жыл бұрын
@@NinjaAlex6r I was thinking about it. I'm sure soon it will be sticker available that you can just put over it. It shouldn't mess with a radar. but over all that logo been chrome don't look to bad
@NinjaAlex6r
Жыл бұрын
@@IvanRossS I bought dark smoked vinyl and it had no effect on the radar system
@jordanwagner892 ай бұрын
Dude im pretty sure you didnt have to take off the whole inside of your car and just used floss around the emblem, pop it off and put black one in its place. Ive never see someone pop off the whole inside of there car
@IvanRossS
2 ай бұрын
You don't have to. You can Ridgid pretty much everything. And do a half ass job I show it how it needs to be done by the book... you can find these manuals all over Honda website... and this is proper way !
@IvanRossS
2 ай бұрын
Also you probably have not noticed or you didn't finish watching the whole video but Honda emblem holds by two metal washers from the inside and those are really hard to remove.... to proper secure it have to be be the same way installing emblem and securing with two little washers from the inside.... emblem is really thin and just 3M tape is not going to hold it after a couple of pressure washers it will fall off
@jordanwagner89
2 ай бұрын
@@IvanRossSvery true, im just gona have the dealership do it bc i dont feel confident in taking the door apart. I would probably break the pegs off trying to take the emblem off anyway. Appreciate the video
@mjnhhhhh65259 ай бұрын
hi is there emblem for the front?
@IvanRossS
9 ай бұрын
No, front emblem it's a radar. Very very expensive peace
@MultiFays Жыл бұрын
Just put my black H emblem on my brand new pilot black edition yesterday, looks great , Honda should do that at the factory for black edition , by the way Слава Україні🇺🇦
@IvanRossS
Жыл бұрын
On sport touring with all that money they charged.. it should comes with it
@12Jsilva
Жыл бұрын
how did you do it? we just got the '23 pilot trailsport. wanting to replace the chrome H mark with a gloss black one. do i need to open the inside of the trunk or i can pry the emblem directly?
@MultiFays
Жыл бұрын
@@12Jsilva Hi ,it should come out pretty easy , you just have to cut of 3M tape on the top and bottom by using fishing line
@12Jsilva
Жыл бұрын
@@MultiFays gotcha. Will do it tomorrow. Got my emblem today 😁😁😁
@MultiFays
Жыл бұрын
Good luck
@davidanderson8469 Жыл бұрын
How about a spare?
@IvanRossS
Жыл бұрын
No spare tire in Hybrid models
@aramisbisono8231 Жыл бұрын
Can you putting to my crv?
@IvanRossS
Жыл бұрын
Yes sure. send me your address, I can go ahead take a vacation buy plane ticket, pay for it and fly to you to install Honda logo
@randomstuff53078 Жыл бұрын
OH MAN...i cant do that to my new car. hahaha... i wish it was easier
@IvanRossS
Жыл бұрын
It's yours you can do whatever you want with it
@Guy-wb3ch11 ай бұрын
Id just rip it off and adhere the new one.
@californication88uu Жыл бұрын
The blue shade looks cheap, you shouldve pick a better blue gloss shade so it will look better
@IvanRossS
Жыл бұрын
It's same color lol on all Hybrid logos
@KosThunder Жыл бұрын
Дякую за відео! Перший канал де багато корисного матеріала безпосередньо від власника Honda CR-V hybrid! Так легко у Вас все виходить), таке враження, що мали досвід в автосфері. Рамка під номерний знак - ТОП! Слава Україні! Слава ЗСУ!
@IvanRossS
Жыл бұрын
Дyже дякую вам. Героям Слава 🇺🇦
@rehanrais6354 Жыл бұрын
Whyyyy
@IvanRossS
Жыл бұрын
Why what lol??
@yurarezhevsky9823 Жыл бұрын
Thank you for supporting Ukraine!❤
@IvanRossS
Жыл бұрын
I was born and raised in Ukraine of course I will support Ukraine
@yurarezhevsky9823
Жыл бұрын
@@IvanRossS Тоді це все пояснює) Приємно чути)
@yurarezhevsky9823
Жыл бұрын
@@IvanRossS Я на Copart купив теж Хонду Спорт з невеликим пошкодженням. Зараз пливе, очікую і потроху вивчаю що може бути корисним... Буде перший мій гібрид)
Пікірлер: 124
Buddy barely got his car and he’s already modifying it!!! I respect that! 🤝
@IvanRossS
Жыл бұрын
Yep that how you do it lol. I modified all my cars and updated audio system, brakes etc. on my old RAV4 i had.
@seanbaril7901
6 ай бұрын
@@IvanRossS haven't even picked up my new CRV yet, and already ordering stuff for it 🍻👍
What a great, helpful, to-the-point, quality video. Thank you! This is exactly what I’ve been looking for.
Great video and very clear instructions. Install went flawless and had no issues whatsoever thanks to you!
@IvanRossS
Жыл бұрын
Great to help, now you have quality made logos that will last you for years and you never have to repaint
Very well explained and looks great! I painted the emblem black on my 2016 crv without removing the trim just slowly pulling it out, luckily the washers fell out where the license plate lights are but this looks much more professional.
I recommend using painters tape before you remove the original emblems to line off the edges to help with putting the new ones on perfectly level in the exact same spot.
@nbraa
Жыл бұрын
that's what the 2 pegs are for
@partlycloudy531
Жыл бұрын
@@nbraa only the H has the pegs
Wow thanks. It’s actually not as hard as you would think. The process is a little tedious but it’s doable
Looks great!!! Thanks for sharing the how too.
Very well explained --- THANKS. I almost didn't try this because of the challenges you had getting the rubber trim popped back out after putting the 6 inch painted trim piece (that the "H" symbol is connected to) back on. You used your plastic trim "pop off too"l to pry the rubber trim back out -- but you had what looked like a pretty tough challenge getting it back out of the seam. Instead of using your approach, I put a strip of painters tap -- glue side facing up -- over the rubber trim. Then put another strip of painters tape, covering 1/2 the width of the previous strip of tape (just to make the painters tape wider than I strip would provide), and then to pull the tape away from the work area, I put some small pieces of tape running straight up, onto the back window, to pull my strips of tape up and away. Once I got the 6" plastic trim piece snapped back onto the car, I just pulled the painters tape off the rubber trim, and it fell right back into place without being squeezed into the gap that you were struggling to get the rubber trim out of. Everything else worked great, just like you showed. Thanks again.
@IvanRossS
9 ай бұрын
That rubber seal was the worst part about whole job
@firefeature45
3 ай бұрын
Good idea!
Looks so much better.
Great video, Thanks! Just ordered mine. Thinking about ripping and gluing the new one 🤔
@IvanRossS
8 ай бұрын
I heard people do that :)
@olivierm2108
7 ай бұрын
Where did you buy it from brother?
After removing the emblems with floss you know it's much easier to just heat the remaining foam lightly with the heat gun and it would come off a lot easier vs. trying to manually roll it off with your fingers.
Wow quite a bit of a pain! Good job.
@IvanRossS
5 ай бұрын
It was worth it :) I have not seen any CRV with blacked out emblems yet
I just plastidip it black, works beautifully! Just took less than half an hour when and make sure your car is clean, that is it!
@IvanRossS
Жыл бұрын
Yes. But it's not going to less lol. I made it permanent. It will less for years. I was looking just to get dipped too but it's only less max 2 years or so. Paint will fade too. Car washes will pill it of slowly.
@slothypunk
Жыл бұрын
@@IvanRossS True, it only last maybe 3-4 years. If you hand wash your car it may last 5-6 years. How much you buy the blackened emblem btw?
@IvanRossS
Жыл бұрын
@@slothypunk all links in the discretion. And currently prices. I bought a kit
@slothypunk
Жыл бұрын
@@IvanRossS Thank you, I don't realize it in the description below
Amazing video! Would you like to test our new product glossy black front garnish overlays?
What is the stuff you used to take out the minor scratches you said?? After you used the winded?
Are the new emblems gloss black and the SPORT satin? Do they match?
RearGate Insulation: pls post video! TY
My goodness, what a pain for just swap little plastic letter. My Honda Passport is just pull the emblem of with plastic lever, clean the spot then push new one in.
@IvanRossS
Ай бұрын
I definitely agree with a pain in the butt but there is a way to get around it. By just simply pulling out and breaking H logo.. and replacing it with a new one But you have a chance to ruin some things. Put scratches on pain. And I believe 3M double tape not really going to hold it properly being so thin on the back of the new logo
Excellent video! Thank you! 🇺🇦 🇺🇦
Excellent how to video. Thank you for doing it. One question, Is that blue nail polish you used to fill the letters in?
@IvanRossS
10 ай бұрын
Yes it was nail polish lol. So far it's holding up.
@bigallis1
10 ай бұрын
Thank you for the quick reply Ivan. That's what I'm going to use also. Pretty cheap to buy to. Less than $2.00 here in USA.@@IvanRossS
@IvanRossS
10 ай бұрын
@@bigallis1 I'm in US too :)
Topgun modification video on the Topgun SUV. ❤️ 🇺🇦 🇨🇦
Nice job! But "Hybrid" emblem was placed slightly slanted downward on the right side.
@IvanRossS
Жыл бұрын
No it's not it's just look like this the video
Great video, but one important thing that you should do is make a template of the emblem prior to removal so you know exactly where to put it back instead of just eyeballing it like you did. Adjust horizontal position of the emblems as well with leveler tool while you were making a template coz sometime they are crooked straight from the factory.
@IvanRossS
7 ай бұрын
Couldn't because area was buffet and polished
@HikaruIchijoe
7 ай бұрын
@@IvanRossS Put masking tape around the emblem strategically from the taillights vertically and horizontally so you know exactly where the C starts or where the V Stops. Remove the masking tape before you do the removal or emblems and clean up, then lay the masking tape back on the trunk again so you now know exactly where to put the emblem back. Align the emblem horizontally by using a leveler and make adjustments if required. Emblems always appear crooked when it’s not aligned horizontally.
Just plasti-dipped mine after seeing the pdf instructions on Honda site. Sport model has blacked out “sport badge” it should have the others blacked out from the factory
@IvanRossS
10 ай бұрын
Yeah I know. That's alot of work
What the tool name you use to heat the bubble
What's crazy to me is there's a world in which people live that want Chrome emblems. I don't understand that at all.
More video trik for the crv hybrid
Great job. I have to say though that it is ridiculous Honda makes it that hard to simply change the emblem.
@IvanRossS
9 ай бұрын
Yes I was surprised too.. but just wanted to do it properly by the book and shoot a video about it
@TheYogimind
9 ай бұрын
@@IvanRossS and that…you did.
How much did you cost for all?
Do you think its possible to access the H logo from the trunk handle below it?
@IvanRossS
Жыл бұрын
No lol. Of course not. You have to do all this job just to get to it . I know it's insane. But it's can be done as u see on the video
Hey Ivan, just wondering if you check your CRV underbody? I know that Toyota has the thing called under body plug (under about in passenger and driver under body) that is part of PDI inspection to plug it in. Reason I asked is because mine didn't get installed and just wondering if you can look up yours and to see if you have the body plug installed? Thank you beforehand!
I wish someone could do a 2023 pilot emblem install???? PLEASEEEEE
@12Jsilva
Жыл бұрын
wanting to replace mine on my 23 trailsport. dunno why the badges are black but the H emblem is chrome
That middle one seems like such a pain, i don’t get why they didn’t have it glued on like the other ones.
@IvanRossS
Жыл бұрын
I was surprised to find out how much work need to be done when I ordered these emblems. But it was a great opportunity for a video 😀
Give me the name of the blue that you painted the hybrid and the adhesive tape, please!!!
@IvanRossS
Жыл бұрын
Double tape was made by 3M. You can buy it at any hardware store And blue paint was simply nail polish... yes I know it's not a great choice lol. Because it's going to be on direct sun but we'll see how long it's going to last. But you can buy any enamel base blue paint. You can find a little small jars of this type of paint at the craft stores. For only few dollars
@toddmeadows1291
5 ай бұрын
Do you have Honda part# for the H and CR-V black emblems?? How about the front one??
@firefeature45
3 ай бұрын
@@toddmeadows1291 You probably have these, but maybe it will help someone else. The H and CR-V kit part #: 08F20-3A0-100
I’m curious tho! What’s the reason for the insulation!?!
@IvanRossS
Жыл бұрын
What do you mean what is the reason for insulation? You installing insulation to lower outside noise lol.
Дякую!
@IvanRossS
Жыл бұрын
Будь ласка :)
Can you list the black and blue paint that you used?
@IvanRossS
Жыл бұрын
Black paint you can literally see in the video. Blue paint was nail polish
@NinjaAlex6r
Жыл бұрын
What type of blue was it? It was hard to see the name, also did you use the gorilla glue to stick back the hybrid logo? Thanks for the response
Can u send me the link for buy the black one , please 😅
@IvanRossS
11 ай бұрын
Read description...
Where u got the crv logo? I can’t find in us
@IvanRossS
10 ай бұрын
You never read descriptions to the videos..... you can find a lot of useful information in that section ! all links in the description
What about the H for the grill?
@IvanRossS
3 күн бұрын
@@michaelfiss4282 they don't have it because it's your front radar sensor
Ну красавчик 😍 за символику 🇺🇦 отдельный респект 👍
Have you blackout the front fake air vents yet
@frankpuma8778
11 ай бұрын
I just ordered those to replace mine. Garnish L Front Bumper 71157-3D4-A01 Garnish R Front Bumper 71152-3D4-A01
@IvanRossS
Ай бұрын
No. actually do not find them being ugly at all.
That’s a lot of work the silver emblem is ok me personally I wouldn’t do that
@IvanRossS
11 ай бұрын
It is. But I did it properly. By the book. I have heard people yanked it out. By braking it off and just gluing new one back on.
You make it look so easy to do🤣!
@IvanRossS
Ай бұрын
I know that was a ridiculous job but I was just trying to show people by the book how is done properly. Besides painting hybrid logo :)
@endlessthunder6161
Ай бұрын
@@IvanRossS i wanna do it but I’m scared of messing up
Do you plan on doing the front emblem?
@IvanRossS
Жыл бұрын
You can't lol. Its a radar
@NinjaAlex6r
Жыл бұрын
😩😩 you think we can smoke it with light tint vinyl?
@IvanRossS
Жыл бұрын
@@NinjaAlex6r I was thinking about it. I'm sure soon it will be sticker available that you can just put over it. It shouldn't mess with a radar. but over all that logo been chrome don't look to bad
@NinjaAlex6r
Жыл бұрын
@@IvanRossS I bought dark smoked vinyl and it had no effect on the radar system
Dude im pretty sure you didnt have to take off the whole inside of your car and just used floss around the emblem, pop it off and put black one in its place. Ive never see someone pop off the whole inside of there car
@IvanRossS
2 ай бұрын
You don't have to. You can Ridgid pretty much everything. And do a half ass job I show it how it needs to be done by the book... you can find these manuals all over Honda website... and this is proper way !
@IvanRossS
2 ай бұрын
Also you probably have not noticed or you didn't finish watching the whole video but Honda emblem holds by two metal washers from the inside and those are really hard to remove.... to proper secure it have to be be the same way installing emblem and securing with two little washers from the inside.... emblem is really thin and just 3M tape is not going to hold it after a couple of pressure washers it will fall off
@jordanwagner89
2 ай бұрын
@@IvanRossSvery true, im just gona have the dealership do it bc i dont feel confident in taking the door apart. I would probably break the pegs off trying to take the emblem off anyway. Appreciate the video
hi is there emblem for the front?
@IvanRossS
9 ай бұрын
No, front emblem it's a radar. Very very expensive peace
Just put my black H emblem on my brand new pilot black edition yesterday, looks great , Honda should do that at the factory for black edition , by the way Слава Україні🇺🇦
@IvanRossS
Жыл бұрын
On sport touring with all that money they charged.. it should comes with it
@12Jsilva
Жыл бұрын
how did you do it? we just got the '23 pilot trailsport. wanting to replace the chrome H mark with a gloss black one. do i need to open the inside of the trunk or i can pry the emblem directly?
@MultiFays
Жыл бұрын
@@12Jsilva Hi ,it should come out pretty easy , you just have to cut of 3M tape on the top and bottom by using fishing line
@12Jsilva
Жыл бұрын
@@MultiFays gotcha. Will do it tomorrow. Got my emblem today 😁😁😁
@MultiFays
Жыл бұрын
Good luck
How about a spare?
@IvanRossS
Жыл бұрын
No spare tire in Hybrid models
Can you putting to my crv?
@IvanRossS
Жыл бұрын
Yes sure. send me your address, I can go ahead take a vacation buy plane ticket, pay for it and fly to you to install Honda logo
OH MAN...i cant do that to my new car. hahaha... i wish it was easier
@IvanRossS
Жыл бұрын
It's yours you can do whatever you want with it
Id just rip it off and adhere the new one.
The blue shade looks cheap, you shouldve pick a better blue gloss shade so it will look better
@IvanRossS
Жыл бұрын
It's same color lol on all Hybrid logos
Дякую за відео! Перший канал де багато корисного матеріала безпосередньо від власника Honda CR-V hybrid! Так легко у Вас все виходить), таке враження, що мали досвід в автосфері. Рамка під номерний знак - ТОП! Слава Україні! Слава ЗСУ!
@IvanRossS
Жыл бұрын
Дyже дякую вам. Героям Слава 🇺🇦
Whyyyy
@IvanRossS
Жыл бұрын
Why what lol??
Thank you for supporting Ukraine!❤
@IvanRossS
Жыл бұрын
I was born and raised in Ukraine of course I will support Ukraine
@yurarezhevsky9823
Жыл бұрын
@@IvanRossS Тоді це все пояснює) Приємно чути)
@yurarezhevsky9823
Жыл бұрын
@@IvanRossS Я на Copart купив теж Хонду Спорт з невеликим пошкодженням. Зараз пливе, очікую і потроху вивчаю що може бути корисним... Буде перший мій гібрид)
Слава Україні!
@IvanRossS
Жыл бұрын
Героям слава, смерть ворогам ✊️🇺🇦