Great comparison. Thanks pyro. No worries on the ignitors, you live you learn. As someone pointed out UKFR has done some great testing with igniters over the years.

@MileHighPyro-303

Жыл бұрын

Appreciate it!! Definitely learning as i go!

Non-OL Rank based on effect & sound 1. Geisha 2. Bombas 3. MineCraft ( mine effect extra points for me ) 4. Giant Panda 5. Hammer of thunder 6. Manhattan project 7. Chroma 8. Ghostacular ( rings are tough for cans) 9. Neon strike 10. American firepower OL Rank - effect shells only 1. Master 7 2. Master 6 3. Anarchy reds Great video man my opinion might be different in person as I've only fired bombas, chromas, and minecraft myself.

@MileHighPyro-303

Жыл бұрын

Would have to agree on most of these. The Geisha shells are absolutely beautiful.

@pyrotitan

8 ай бұрын

I hear so much good about Chroma, but in a side by side they looked pretty weak, I'd put them last or right above American Firepower. Most the SFX stuff has been super high quality for me, that Minecraft was SWEET. The top spot is a tie for me between Geisha and Minecraft.

What works really well for me with the mjg igniters is actually taking the fuse out and putting the igniter directly in the lift charge. never had a misfire doing that.

Rock on 🤘🏼 brother 🧨 💥 💣 Congrats on the 500 Pyro!

@MileHighPyro-303

Жыл бұрын

Appreciate it! Up over 700 now cause of you guys!

Why do I feel like my mind is blown watching this video with all these shells, awesome presentation! The Thunder shell was cool, Geisha was poppin, but whatever them Master bombs are I needs dem! Wow💯

@MileHighPyro-303

Жыл бұрын

Those hammers really surprised me as well. Geishas are easily my favorite consumer shell. Master are masters, iykyk.

@jaykingthoughts

Жыл бұрын

I’ve always like the Geisha shells but locations are to far away and shipping cost….. well I’m sure you know how it works… so wasn’t able to get any yet but again the master 6,7 are ridiculous

@MileHighPyro-303

Жыл бұрын

Gotta shop red apple when they have the stuff you want on sale and they offer $99 shipping. That's the only time it's worth it. I will be doing one big order of shells through them annually.

@jaykingthoughts

Жыл бұрын

$99 shipping that doesn’t include a minimum purchase $1199 etc?

Just subbed over 700 now let’s F’n Go Congrats dude

@MileHighPyro-303

Жыл бұрын

Appreciate the support!

Aye brotha congrats on 1K man first vid i’ve watched and it was a an amazing video definitely going to watch more of your content keep it up 🎆👍🏼

@MileHighPyro-303

Жыл бұрын

Appreciate it! The support does not go unnoticed!

Very nicely done. Appreciate u showing off the selection. Wish i could find masters shells. Running raccoon break the rules this year.

@MileHighPyro-303

Жыл бұрын

Raccoon shells are a great choice! Happy 4th!

Congratulations keep it up very nice comparison video I like them all🔥🔥🤘🏻🤘🏻

@MileHighPyro-303

Жыл бұрын

Appreciate it! I think any real pyro likes anything that goes boom haha!! 💥💥

As others are saying, cut the fuse to expose the powder. Ive been using the mjg clips and they seem to work well also. I passfire most of my shells to save on ignitors and I'm limited on cues, but if your already using one ignitor per shell, might as well go directly to the lift charge. More satisfying having the instant launch also loll

@MileHighPyro-303

Жыл бұрын

I have thought about going directly to the lift charge. But I don't like the idea of having the igniter down the tube.

@brettarnold2419

Жыл бұрын

@MileHighPyro-303 it works well, doesn't affect the shell leaving the tube. Just add a screw on the rack to wrap the ignitor around or drill a small hole at the top of the tube to knot the wires in it. This keeps the shell from yanking the wires as it leaves

@middletnpyro

Жыл бұрын

​@MileHighPyro-303 couple tips when poking directly into the lift, always leave the shroud around the match, push the shroud/match all the way into the shell, tape the hole, if you do use the mjg initiators with fuse leave a space between the fuse and the match head, don't push the fuse right against the match, and most importantly tie off the end of the wire to a screw or nail on the rack

@notfred596

Жыл бұрын

@@MileHighPyro-303 CodyBPyrotechnics has some videos on fusing mortars/racks where he shows cutting off the bottom of the cans and pouring the lift charge into the tube, then having two small (only big enough for fuse to go in) holes drilled near the bottom. One input, one output both around the lift charge height (right next to bottom). Dump the lift charge, put the cannister sitting on top of the lift, then put fuse into and out of (then from the output to the next input) and hot glue the fuse onto the tube (put fuse into the hole then hotglue then lift charge on the off chance the lift is ignited by the glue.. they said they haven't had it happen in over 1,000 cans though.)

Thanks for the video brotha. I know its a lot of hard work. Idk about the connectors but itlooks like its just not getting hot enough to me. Youll get it brotha, stay trucha, nice video.💥💯💙

@MileHighPyro-303

Жыл бұрын

Appreciate the support and feedback. Will definitely keep at it!

great demo love shell comparison the master 6 an 7s are awesome just subscribed great Logo

@MileHighPyro-303

Жыл бұрын

Thanks for the sub!

The comparison was on point. I'm also here in Colorado, but down south. I'm the number 700 sub for you. I always support fellow pyros in the state. 💪

@MileHighPyro-303

Жыл бұрын

Appreciate the support from everyone, but especially other Colorado pyros!!

@MileHighPyro-303

Жыл бұрын

DM me on IG.

@MileHighPyro-303

Жыл бұрын

@Sanchez-cn4qh DM me on IG

Just subbed, at 960!!! Almost there!!!

@MileHighPyro-303

Жыл бұрын

Appreciate the support!!!

Very nice Demo ... SUBS !!!

@MileHighPyro-303

Жыл бұрын

Appreciate the support!

Nice demo!

watching on June 28th; you're just over 1k subs! congrats!

@MileHighPyro-303

Жыл бұрын

Appreciate it! Brainstorming ideas for a 1k video... Hopefully something before the 4th.

Awesome 👌 demo says #BBQRando 🌵💥💥💥 Keep the #pyro passion going ❗️

@MileHighPyro-303

Жыл бұрын

Thanks #BBQRando! Will definitely keep the #Pyro going!

Congratulations 🎉

@MileHighPyro-303

Жыл бұрын

Appreciate it!

It's the small piece of white fuse that is causing a problem. When you hit that quick fuse with the igniter that short amount of fuse explodes. It's not giving it enough time to ignite it's just blowing out the tape . Alright personally don't care for electronic lighting I hand light everything timed with fuse.

@MileHighPyro-303

Жыл бұрын

Interesting thought. I had tried this method before and it worked much better than just attaching the igniter to green visco on rockets or cakes. Now it's the same method possibly causing the issue. Back to the drawing board. I will likely manually fuse my shells and rockets for the 4th.

Awesome demo, i have all those superior shells, cant wait to try em

@MileHighPyro-303

Жыл бұрын

The Manhattan shells definitely impressed. Happy 4th!

I dig your style bro. I'm always on the look out for the bangers like the anarchy whites etc. Picked up some bubba thumps this year im itching to light those bad boys up this year.

@MileHighPyro-303

Жыл бұрын

Appreciate it man! Only discovered bangers this year, next season will be even bigger!

@Southsidechipyro

Жыл бұрын

Lets collaborate together on where to find them let me know how to contact you. I got rid of all my social media but we can figure something out to get in contact

@MileHighPyro-303

Жыл бұрын

Honestly best way is either Facebook, which i rarely use, or IG. Have my email linked to my KZread channel, but not sure where you would find it haha.

@robroskey6515

Жыл бұрын

You don't have to be specific but where did you find those bubba's? A store or did you just find someone selling them. I can't find salute cans to save my life

Tape and extra fuse works great

@MileHighPyro-303

Жыл бұрын

That's what I thought, but the white quick fuse still didn't help with these.

@pyrocrew17

Жыл бұрын

@@MileHighPyro-303 honestly I just use tape on the rack just connect the fuse to the next fuse. It’s more like a sky puke

@MileHighPyro-303

Жыл бұрын

Gotcha. Ive definitely done that before haha sky puke can be fun.

How much louder are salute cans like anarchy white than OL color like master 100s? I know at a certain point it stops mattering deepening on price.

@MileHighPyro-303

3 ай бұрын

Salute specific shells are much louder than OL color shells, doesn't come close.

Dam what a shell for the master 7, was a great shell

@MileHighPyro-303

Жыл бұрын

Those are definitely a neighborhood winner. Haha

Maybe go over that rack you have? How it’s made ? Tube size of and what’s at Tempe bottom ?

@MileHighPyro-303

Жыл бұрын

Just replied to your other comment. Happy to answer any other questions. That's for the support!

So i was wondering can you shoot a 7" shell out of a 5" canister shell tube? Thanks!

@MileHighPyro-303

3 ай бұрын

If you're talking about cannister shells, yes. You can shoot 4"-7" all out if the same 12" tube. All that matters is the diameter.

@brianscutt6298

3 ай бұрын

@@MileHighPyro-303 awesome, thanks for the information!

Geisha by far the best willow kit ive shot 🙌🎆

@MileHighPyro-303

6 ай бұрын

Definitely one of the best, especially for regular consumer shells.

@pyromaestro

6 ай бұрын

​@@MileHighPyro-303agreed 🙌

I go with 2 zip ties with a piece of one inch tape and a leader fuse. If running mjg best to poke them.

@MileHighPyro-303

Жыл бұрын

Poking them is definitely the best option. May do that on everything just to be safe.

Where did you get the Master and Anarchy shells?

@MileHighPyro-303

9 ай бұрын

Have a couple different sources. Have to dig a bit and gain some trust.

Great Video! Did it look like the 4” Anarchy hit louder than the 6” ones

@MileHighPyro-303

Жыл бұрын

Anarchy reds are OL, so they will hit harder than standard 6".

@darknessfalls1956

Жыл бұрын

had A last year and M this year A break low sound load but nice shells M are monsters, but A can be priced a lot lower for better deal.

Talons are the way to go

@MileHighPyro-303

Жыл бұрын

Love the MJG for direct ignition on cakes. Talons do work better for rockets and shells. Just weird to see a fuse explode but not ignite.

@Thrills1.1

Жыл бұрын

@@MileHighPyro-303 look up a video Consumer igniter failures it’s like a 20 mins video they test out different lengths and types of consumer igniters I just watched it yesterday and learn a lot since it’s my first time using a firing system this year

That's why I don't waste my time and money on electronically lighting fireworks

@MileHighPyro-303

Жыл бұрын

I will say, using these igniters directly in cakes is definitely worth it. The issue is using MJG with rockets or shells. Talons seem to work better for those, but you still don't get the instant launch.

@brentfields93

Жыл бұрын

Its how they were done, clip ons suck .. Electronically is way better when done correct that’s why mainly all professional shows are done that way

@beersekefe1

Жыл бұрын

CLIP ON IGNITERS FOR FUSES👍

@MileHighPyro-303

Жыл бұрын

That's definitely the route I'm going for my show. MJG for the cakes and talons for the shell racks and rockets.

@pyromaestro

6 ай бұрын

You dont want your visco to touch the igniter if using on cans get MJG to visco connectors or carefully notch the shroud, split your visco & run the visco across the top of the shroud rather than down in it & then tape it down. 🙌🎆

Geisha and Bombas were pretty dang good the only one that was better was the master 7 great video and to bad red apple does not get the credit for how good a lot of their products are. Superior was not bad either the Manhattan shells were 😢better than I thought and I am glad because I bought a case this year for the first time. Great demo and to bad the igniters failed.

@MileHighPyro-303

Жыл бұрын

Appreciate the support. I agree with everything you said. I think it's widely accepted that red apple shells are great, their cakes is where they lack. Love the great American fireworks co brand as well. So far everything ive launched from them has been great.

@lieutenantriggs7690

Жыл бұрын

Even if they false advertise a bit with the shell length(which most of these companies do), their shells are still solid. Great prices especially if you get cases on sale. The branding/artwork is sick and I love that every shell is different, numbered, and labeled. For 60g shells you can’t really go wrong.

I had the same problem last years 4th show. With those MJGs

@MileHighPyro-303

Жыл бұрын

I've switched to talons for any fuse connection, and use MJG exclusive for direct cake ignition.

@thomasbyerly2782

Жыл бұрын

@@MileHighPyro-303 yeah they work good on my cakes just racks with fuse was the problem. U even wrapped em with tape and put hi speed fuse like he did

Nice show bro

@MileHighPyro-303

Жыл бұрын

Appreciate it!!

Nice vid man. I live near Denver myself (centennial). Can anyone point me in the right direction to find some better cans. I go to the Wyoming border, the phantom and pyro stores. I haven't been to the other ones up there but those two stores have the same Crap every year and basically none of the stuff on this video and the idiots that work there for the season don't know anything. Any tips on where to go for other brands in or near Colorado. Do the other few stores up there have better selection or do you order online. Specifically salutes which i can't find anywhere. The only thing I found that I was looking for is some of those whistling sonic cans. Sub to my fellow Coloradan

@MileHighPyro-303

Жыл бұрын

What's going on pyro! I appreciate the support from another Colorado pyro! DM me on IG, I can certainly point you in the right direction. Definitely want to stay away from phantom at all costs.

Best mortars for 2023???

@MileHighPyro-303

Жыл бұрын

From what i have, master 7 hands down. Regular consumer? I would say geishas.

where at in colorado do you get away w doing this? cause i always got busted for shooting them in elizabeth

@MileHighPyro-303

Жыл бұрын

I wouldn't say i "get away with it". I just dont light stuff off long enough for any cops to come around. And I've been lucky my neighborhood is mostly cool with it. Some of the bigger demos or comparison videos that require time, i shoot out in an open parking lot away from any buildings to avoid the attention.

Subscriber 966 boom boom pow. I like the master 6, them cans sound mean Bro.

@MileHighPyro-303

Жыл бұрын

Appreciate the support!! Those masters are definitely no joke.

Awesome vid pyro, new sub, sucks that you had so many misfires, good old blowtorch doesnt do that lol, old school pyro here, pyro brother and stay safe.

@MileHighPyro-303

Жыл бұрын

Definitely enjoy hand lighting. May go back to that for sure haha. Something about your hands smelling like powder after the show just feels different than hitting buttons

@bennycru

Жыл бұрын

@@MileHighPyro-303 well said pyro and the burn marks on our shirts lol

First time I’ve ever seen that but I don’t use a system that kinda changes my mind on getting one

@MileHighPyro-303

Жыл бұрын

It's worth it to directly invite cakes. Timing is great when used that way. mJG is just trickier to use directly with green visco fuse. Talons work better for green visco.

🧨🔥 I would look for Ematch, Regular ematch with A piece of masking tape around the ignitor and fuse has almost 100 percent success rate that way. Theres also a channel that has done extensive testing on electronic ignition, he may be worth looking up, the channel is "UKFR'

@MileHighPyro-303

Жыл бұрын

Appreciate the tips and pointing me in the right direction!! Will definitely look into that.

@youtubesucks-yx6kk

Жыл бұрын

@@MileHighPyro-303 no problem. Stay safe ✌️

@MileHighPyro-303

Жыл бұрын

You as well, happy 4th!

@Southsidechipyro

Жыл бұрын

You need an ATF license to get ematch

@youtubesucks-yx6kk

Жыл бұрын

@@Southsidechipyro you must have never heard of Amazon.

👍👍👍

@MileHighPyro-303

Жыл бұрын

Appreciate the comment!

I like to cut the fuse on a 60° angle and then install my igniters you're exposing much more powder inside

@MileHighPyro-303

9 ай бұрын

Appreciate the comment and advice!!

i love your video

@MileHighPyro-303

Жыл бұрын

Appreciate it!!

Do you have some Black Cat neon Diablo shells

@MileHighPyro-303

Жыл бұрын

I do not have those unfortunately.

Can you elaborate on how you got "misfires" does this mean that the shell you thought went off didnt go off or did something else go off instead?

@com3t

Жыл бұрын

I guess i was confused when you said "misfire" i assumed you had some sort of crossfire.

@MileHighPyro-303

Жыл бұрын

Probably poor choice of words. Should have said those shells failed to ignite.

@com3t

Жыл бұрын

@@MileHighPyro-303 do you have access to quicmatch

@MileHighPyro-303

Жыл бұрын

I do not unfortunately. That would make things easier haha

Anarchy black any louder than the white?

@MileHighPyro-303

Жыл бұрын

They are , but not by much. Honestly when factoring in cost, anarchy white hands down.

bro ive used MJG ignitors for years, this is on you.

@MileHighPyro-303

Жыл бұрын

Interesting, appreciate the feedback. I wonder what the hell I'm doing wrong.

@com3t

Жыл бұрын

@@MileHighPyro-303 are you using talons? ematches?

@MileHighPyro-303

Жыл бұрын

It's the MJG igniters with the red shroud. They work great for cakes and direct ignition. Had issues with rockets now shells. Thought I solved the issue with a small piece of white quick fuse, but clearly not.

@jchav05

Жыл бұрын

I usually cut the fuse in an angle so it can exposed the actual powder in the fuse bro just used non conductive cutters

@kevinbossingham2861

Жыл бұрын

@@jchav05 This! I've had a much higher success rate lighting fuse with MJG igniters since starting to cut the end of the fuse off at an angle first. It exposes more of the powder to the flame. MJG also has new visco shroud igniters that you might want to try out.

Your coming up on 700 ! you made this a while ago. 73

@MileHighPyro-303

Жыл бұрын

I recorded the intro about 2 weeks ago and then had a combo of bad weather, nuggets Championship and vacation chew up all my time. Glad to finally get the video out though.

@3ccdmike

Жыл бұрын

@@MileHighPyro-303 💥

I only go directly into the charge.

@MileHighPyro-303

Жыл бұрын

I definitely do that with all of my cakes, but not shells.

i had happen to me Kingslayer by Dominator 18 shell kit4 in a row

@MileHighPyro-303

Жыл бұрын

You learn from it , and move on. Appreciate the comment!

Anarchy white n black pretty much the same.

@MileHighPyro-303

Жыл бұрын

Pretty close for sure. I would say the value is in the anarchy white.

Can u dou a demo on death shelles bro?

@MileHighPyro-303

Жыл бұрын

I don't have those. I'll have to try to track some down.

@andresbahena423

Жыл бұрын

@@MileHighPyro-303 tank u my friend Have u been at Hannibal Missouri the super firework store?

@MileHighPyro-303

Жыл бұрын

I have not, that is definitely on my bucket list. Might make the drive this fall.

@andresbahena423

Жыл бұрын

@@MileHighPyro-303 u well love this place

Is the geisha kobushi same as the reg geishas

@Dukexx559

Жыл бұрын

What y’all think about the kobushi

@MileHighPyro-303

Жыл бұрын

They are a different shell. I have not personally fired the Kobushi.

@lieutenantriggs7690

Жыл бұрын

@@MileHighPyro-303re they different? I haven’t shot kobushis personally but I thought Red Apple sells those packs of 6 shells that are just ripped straight from the full 24 kit. Since the full kits are divided into 4 main effects, you can buy just 6 of the effect you want. Example, Kobushi is Geisha kit split into the 4 groups, Sugar Skulls is Bombas split into the 4, etc. The effects on the box from 6 pack to full kit are identical I believe. You could be right though, they may not just be rewraps. I’ve never tried any outside the main kits.

You shouldn't use those type on the shells. Use the ones the clip on the fuse. The ones you used are made for cakes.

@MileHighPyro-303

Жыл бұрын

I agree talons work better for shells and rockets. But these igniters should work as well, just a little more finicky.

6, 7, and 8 inch shells. 🤣

@MileHighPyro-303

Жыл бұрын

No 8", 7" is already excessive for consumer canister shells. Lol

@JDPyrotechnics

Ай бұрын

So you don't know about the master series...

@ReneeNme

Ай бұрын

@@JDPyrotechnics I am fully aware of the Master series. I've been a pyro for 50+ years.

I know it’s easier but don’t use clip ons they suck honestly, unless you v cut the fuse where you insert the clip.

@brentfields93

Жыл бұрын

There’s a good video on here how to do canister shells that will help a lot

@MileHighPyro-303

Жыл бұрын

Clipons actually work better for shells and rockets. Short of sticking the MJG directly into the lift.

@MileHighPyro-303

Жыл бұрын

I'm actually curious to see that. Do you have a link.?

@brentfields93

Жыл бұрын

@@MileHighPyro-303 that’s what you’re supposed to do is stick it directly into the lift from the bottom.. you make a small slit at the very bottom and insert igniter then you tape the bottom back with a spot for the igniter to rip out without pulling on the shell

@brentfields93

Жыл бұрын

@@MileHighPyro-303 kzread.info/dash/bejne/iX9kxY9th6fFXaw.html