No video
2022 F150 Ridetech Drop Kit Full Install 3/5 coil overs and flip kit
Hope this helps anyone looking to install a ridetech kit on their 21-22 F150. This is the way I did it. There might be better ways but this worked for me. I added a few tips and pointers. Make sure you follow instructions for correct procedure and torque specs. 2022 F150 XLT 5.0 RWD V8 in a stone gray color. Reach out to me with any questions
Пікірлер: 97
Nice job. You work as if you've done this for a living. I'm contemplating installing the RideTech kit on my 2019 Crew Cab. Thanks for posting.
Thanks for this video. I been going around and around in my head on doing it myself. Every hurdle you had will save me time later. I’ll save my pennies and do it myself, and just pay for an alignment.
@5.0truck
Жыл бұрын
im thinking the same. howd it come out for you?
Dope truck … ridetech always delivers ! Hope to see more of the truck in the future. 🤘
Magnificent looking truck, you have a real gem, extremely hard to find. I have a 2019 5.0 2wd short wheelbase truck also (black). I'm almost 60, grew up with only regular cabs, short and long boxes. My previous truck (which I still drive twice a week) is also a swb 1997 f150 4.2. I was very surprised in pre-covid 2019 at how difficult these are to find. Bought my XL, 101A package, stock in February 2020, price was reduced to 29k as no one wanted it. My dealer traded the other dealer a Fusion as they didn't have another truck on the lot that cheap. I'm to old to do all the mods that your doing. I did do a few items. A Roush catback and a Ford Perf. 2 inch drop for the rear. Also found a fellow doing a chrome delete on his Lariat, so I picked up his grille, LED headlights/foglights, and his 20 inch rims for 2k. Your truck is looking great. I'll subscribe to watch your progress
@brokedownfixedup
Жыл бұрын
Appreciate the compliments! This is a long term keeper truck. Dream truck for me. Just ordered a Borla s type exhaust today. Eventually I’ll get wheels and tires. Maybe some platinum or tremor headlights down the road. Hope your trucks treat you right!
@rickymortero3023
Жыл бұрын
@@brokedownfixedup keep us updated , beautiful truck
Very good video on the install. I use to make videos a while back on the charger I use to have. Just recently bought a 23 F150 5.0 that I will be doing a build on so it is good to see quality install videos out there
Great video. Just ordered same Ridetech kit for my 2021 RCSB. Black Friday sale saved 20%. 😅
I just finished installing the rear portion of this kit on my 2wd 2018 rcsb. This vid was quite helpful. Sitting perfectly level at the moment with no vibes or noises. Now time to do the front and lower the rear a bit more 👍
@brokedownfixedup
11 ай бұрын
Happy it was helpful ! Good luck
Thanks for posting this. I kept looking for videos on this kit and there wasn’t much out there. I’m planning on doing it on my 23 when it comes in.
@brokedownfixedup
Жыл бұрын
Glad it’s helpful. That’s exactly why I made this video. Couldn’t find any ridetech stuff for the f150. So far it’s been great.
A before and after pinion angle measurement would have been interesting to see but otherwise great job recording and explaining install!
Awesome vid, any updates for the ride quality? I have read that some have had pinion angle problems and bed shaking on similar drop kits. So far this one looks like the best bet.
Very helpful. I appreciate how you laid out the different shackles side by side and your filming and narration was very clear. You are a natural with only 10 subscribers! I've been saving my empties so I can afford a Ride Tech. A little bummed that there is a fitment issue with the plate and the shock bolt. I guess you felt you did not need the air bags or the anti-sway bar or traction bars they offer? I hope you do another follow up with your ride impressions after you've had it a while. I also bought the Maxtrac 1.25 shackle. Seems good quality but like you I am more of a fan of the rubber bushings so not sure if I will install. I'm curious if using the Maxtrac would actually raise the rear slightly since the axle is flipped?
@brokedownfixedup
Жыл бұрын
Thanks for the feedback! The bolt fitment issue I believe is fixable. I just gotta slide the axle over a bit. I’m planning to do a follow up pretty soon. It’s been great. Well worth the money. The long max trax shackle will lower it another inch. If I put the really short shackle I showed, it should raise it about an inch.
@Robert8455
Жыл бұрын
@@brokedownfixedup You are welcome and thanks for the follow up reply. My buddy just put this same kit on his 22 and I'm ready to just order it. Any other mod plans?
@brokedownfixedup
Жыл бұрын
@@Robert8455 I’m planning on a Borla s type exhaust and some RTR 20x9’s eventually.
Saw all was def the tool to cut those bolts on leaf springs. Would have done it in about 20 secs. Nice video!
Your video was really helpful man, thanks
Amazing trucks just got my 2023 only mine is carbonized grey
The flip kit portion is an interesting design. It's different from the Maxtrac one I've installed or IHC's flip kit where you have a plate on the spring perch that U-bolts latch onto. The idea of a ¼" steel plate being the only thing keeping the rear axle together while under crazy stress still doesn't sit well with me. If I didn't have traction bars I would've ended up like a dude on the f150forums...the U-bolts just rolled right through the lips of those plates flattening them during a track pull. Scary stuff. So thinking about weak points to Ridetech's approach using round U-bolts that go directly over the axle...I supposed the nuts themselves would be it. But I guess it's all moot if you have traction bars...keeping the axle straight putting minimal stress on the flip kit. I guess it's just a rule of thumb then...you put any kind of flip kit on, you better have traction bars to keep everything in tact in case you put down some crazy torque...
Awesome video and thank you for this upload. Currently ready to put this kit in our 2023 scsb just like yours, but very confused on the rear shackles. I thought I wanted to use the provided adjustable ones, but use the highest holes to make her as low as possible, assuming it would be to low then? How did your pinion angle come out afterwards with this setup? That rear shackle has everything to do with the pinion angle for sure.
@brokedownfixedup
6 ай бұрын
I chose to use the factory shackles because it was the ride height I was looking for and prefer to use factory parts as often as I can. I’d use the ridetech ones if I wanted a different ride height. I have not had any pinion angle issues
5.0 all the way.👍
That was definitely a Hold my beer moment
Very nice truck, great precise job
awesome job , bad a** truck subscribed
2:55 Flip the bolt around?
Really good looking truck sir.
15:44 nice cut lmao
great video man beautiful truck i have a question if you ever wanted to haul something and lowering the truck would it affect the haul? since its low?
@brokedownfixedup
Жыл бұрын
Since then Iv installed the rear helper bags. If you wanna haul stuff I’d add the bags. Easy install. Thanks for the view and compliment!
@brandonvillanueva1926
Жыл бұрын
@@brokedownfixedup bet thank you so much looking forward for one of those🙏🏻
Thanks
Where could I get those bump stops at?
Pingle angle
@MODIT
6 ай бұрын
I wonder about this as well, its one of the things never mentioned.
Does it bottom out in the rear on large bumps? I have the IHC 3/5 drop on my 21 RCSB and it bottoms in the back. I actually installed Ridetech air bags on mine to help with the bottoming and so I can tow if I want to.
@brokedownfixedup
Жыл бұрын
I have yet to bottom out. I have about 2 5/8” of travel from the bump stop to the rear axle. But I’m only lowered 4.25” so just take .75” of travel away if you’re on a 3/5. My adjustable fox shocks I’m sure help to not bottom out
@toddginabreckler3915
Жыл бұрын
@@brokedownfixedup I just went and measured mine and its a hair above 2" clearance from bumpstop to top of axle. I too have Fox shocks but they are not adjustable.
I'm curious why you kept the stock shackles when the RideTech has adjustment holes that basically line up with the factory shackle height? Wondering if I'm missing some benefit I'm not thinking of...
@brokedownfixedup
6 ай бұрын
I prefer using factory parts if possible. If I didn’t like the ride height I’d use the ridetech shackles
Looks great !!! Btw what’s the brand of your tonneau cover ?
@brokedownfixedup
11 ай бұрын
It’s a backflip X4s
Has that rear shackle been scrubbing ??😮 EDIT: Or was that just from you working on it? Did you have any driveline vibrations? I occasionally use my truck for hauling flooring, carpet , wood ect.... I see you said there was 3 1/2 inchs between th3 bumpstop now.. Any idea how much it squats with a load on it? EDIT 2: As Im watching the entire video , you didnt have a jack under that lower comtrol arm when you took the upper ball joint loose? Final Edit, lol How much adjustment is on the front.. 2 -4 inch drop?
So sweet.
Hey will this kit work on a 2021 f150 super cab and 6.5ft bed?
You said you got a 4.5-inch drop on the rear. If I only wanted about a 3.5-inch drop, I'd use the Ridetech shackles..?
@brokedownfixedup
5 ай бұрын
Yes you’d use the ridetech shackles at their heights setting. Which would be the shortest hole on the shackle
Did you have any problems reaching the upper control arms to torque them once the wheels were on and it was at ride height?
@brokedownfixedup
26 күн бұрын
I jacked up the front of the truck from the lower ball joints with the wheels off. You have plenty of access with the wheels off
@rendiewmit86
26 күн бұрын
@@brokedownfixedup that's probably how we'll do it but I was hesitant because I wanted to make sure the angle of the UCA is close to being correct.
@brokedownfixedup
26 күн бұрын
@@rendiewmit86it’s about as close as you could get it prior to going to the alignment shop. The weight of the truck will be on it.
Looks good👏🏽👏🏽👏🏽
Clean stuff man 😍
Awesome looking truck, what kind of bed cover are you using if you don’t mind me asking. Thanks in advance
@brokedownfixedup
Жыл бұрын
Thanks! It’s made by bakflip. It’s the roll up X4s
Any issues with creaks mine is making noise
@brokedownfixedup
4 ай бұрын
The front hangers needed to be tightened down a bit tighter than what is recommended. That pretty much got rid of my creaks. Here and there I’ll get one but nothing annoying
What kind of grease did you use for upper control arms ?
Is there a coil spring conversion from leaf springs available? Seems like it might be easier and better in the long run
Where can i get those drop shackles
Looks good.. but how does it ride.?
@brokedownfixedup
6 ай бұрын
Rides nice. Much better than stock. I installed rear helper bags
@19jody72
6 ай бұрын
@@brokedownfixedup appreciate the feedback. My nephew just got the fp700 package, he said the body roll was terrible!!
How does it ride ?? Did the ride quality change?
@brokedownfixedup
5 ай бұрын
Rides a lot better than stock that’s for sure. It’s comfortable and sportier
@Lxmustang805
5 ай бұрын
@@brokedownfixedup hell yeah Thanks for the feedback
How much did that lower the truck is it under 6ft?
hello ! question where do you buy the clime control lower-trim??? Thank you for your answer
great video
What is your measurements after the drop from ground to fender?
After driving it for 5 months, how would you describe the ride quality? Did you change the dampening settings at all since the install?
@brokedownfixedup
Жыл бұрын
It rides great. Much better than stock. I did go up a few clicks on adjustment. I think 8 front and rear now. After a couple months I did get a creaking from the front leaf spring hangers. I went ahead and retorqued a bit higher than instructions suggest. No problems since then
No more RCSB XLT :(
I got this same kit and was wondering if you had any vibration in the rear afterwards?
@brokedownfixedup
Жыл бұрын
No vibration. I did go rather mild with the lowering though. Iv heard crew cab guys do get some vibration here and there. Luckily nothing for me
What size tires are those on the 18"'s? Def look smaller than stock. im thinking about doing the same
@brokedownfixedup
Жыл бұрын
These were stock take offs from a 13th gen stx. I did go to a 20” shortly after this video
Question on the maxtrac initial shackle drop- did you have to install a shim? Any vibes?
@brokedownfixedup
Жыл бұрын
I did not notice any sort of vibration with the maxtrax. They’re advertised as 2” drop but it’s only 1.5”. I did not use a shim.
@victorjimenez1726
Жыл бұрын
Hmmm thanks for reply I just installed a set on 2022 f150 single cab and picked up a vibe between 20 and 30 mph
What shackles should i use to dropping 5.5 rear ??? I have a belltech lower .
@ImDead1nside
Жыл бұрын
Just flip kit itself should do 6 inch.some kits include a 1inch lift shackle for a 5" drop
Hey, do you know what do you torque the rear shackles to?
@brokedownfixedup
Жыл бұрын
I believe states 157lbs. Does seem a bit excessive as you can see the mounts start to bend in a bit.
How long did it take to install? Thanks
@michaelruiz1032
8 ай бұрын
I’m curious as well
need some good kyb shocks on it
@chrimsson
9 ай бұрын
The kit he's using come with fox shocks which are some of the best on the market
How have you liked the ride quality?
@brokedownfixedup
Жыл бұрын
So far it’s been great. It rides a lot better than stock that’s for sure. Nothing about the ride makes you think you’re in a lowered truck. Everything is very tight no knocking or rattles. Haven’t noticed any pinion angle vibrations.
@keithhorton9180
Жыл бұрын
@@brokedownfixedup
What size tire you running?
Low payload