Thanks Matthew, another excellent expert maintenance/upgrade video for Zebco products. Please continue! Steve

@OutFishing13Matthew

2 жыл бұрын

Glad you liked it. You got it!

I just got this model yesterday, I was glad to see you already have a supertune and service video posted, much appreciated!

@OutFishing13Matthew

2 жыл бұрын

Charles, You are welcome. Thanks for watching. I am trying to get as many videos of new models as possible. I am making a little money from the videos now and I am reinvesting it for all my subscribers. So I get a new reel each month to work on and do a service video and super tune if possible.

@charlesdjones1

2 жыл бұрын

@@OutFishing13Matthew with your help I just tuned up my 3 year old Boss Hawg that had been out in the elements the past year, I had kind of forgotten about it. I was telling my wife, "Look at this! There's so many things we can do these days thanks to KZread." The bushings were still in excellent shape, I do want to get the bearings for both eventually, it's nice to see Zebco doesn't engineer the models so different to where you can't upgrade them.

Checked out your video list. Amazed how many models and variations of those models made. I'm interested in the history of the vintage reels of all brands and types. I never needed to purchase new rod & reels as they were 1970's Zebco. They worked very well catching everything in the Kansas fish ponds. 👍

@OutFishing13Matthew

2 жыл бұрын

Check out the Zebco Collectors Facebook page. Great group!

iv used 409 to clean mine when i ran out of wd40 or reel cleaner works good and don't damage the plastic i like these 808s there smooth i might get one

@OutFishing13Matthew

2 жыл бұрын

It is a nice reel for sure. Thanks for commenting.

Thanks,planning on picking up a zebco spool it with 2 pound test and cast halfway across the lake with a 1/4 ounce red devil.

@OutFishing13Matthew

Ай бұрын

I recommend you back it with 8 pound test first and fill it 50%. Then use a joining knot and tie on the 2 pound and fill it till you have about 3/16 from the top of the spool. Otherwise you may have some issues

@JunoTafoya

Ай бұрын

@@OutFishing13Matthew Yes Sir, will do

WD-40 is 10% oil and 90% mineral spirits blue can. I like the stuff but I like Remington REM oil. I've been waiting to change out the plastic bearings to stainless steel or ceramic bearings. Thank you

@OutFishing13Matthew

5 ай бұрын

You are welcome. Good luck with your super tune.

Holy cow. I've watched several videos. Just now noticed.....Go Cougars....

@OutFishing13Matthew

Жыл бұрын

Right on!

Hello Matthew,hope all is well. Hey do all 808 only have one pickup pin and the 888 has 2 pickup pins? Thank you as always for your knowledge .

@OutFishing13Matthew

2 жыл бұрын

It doesn't seem to be consistent.

Hello Matthew!!! Hey you told me about the drag on the 888 does it matter that much if the drag is on the top part of the reel or the star wheel drag? I see a lot of old (pro staff) reels on ebay and was just wondering. Thanks again

@OutFishing13Matthew

2 жыл бұрын

Both work very well. Some of the older 888s us a drag that uses a clutch that is built inside the spool.. see my vintage 808 video. Then the others use the modern clutch that uses drag washers and applies pressure to the bottom of the spool. The main difference is the way they are adjusted. Star gear or drag wheel. They both work great.

Good morning sir!!! Hope u have a wonderful day today. Hey what's your take on the old johnson reels ,the country mile and the century series.thank you,

@OutFishing13Matthew

2 жыл бұрын

I don't have an opinion about the Johnson Reels about using them. I only repaired that one which belonged to a neighbor. It has a sturdy frame. I did not like the gear system or the drag system.

Hey Matthew, how can I find out the info needed to upgrade my Zebco's... I've got several... after watching you do I'm convinced that I can do it but don't know where to start...

@OutFishing13Matthew

Жыл бұрын

What models do you have? I have a lot of Super Tune videos and tell you the bearing sizes.

Mathew, another great super tuning video. I am interested in getting one of those bearing kits. How much are they? (The in video info says to contact you through your "About" link. I couldn't find any information in that area about how to contact you.)

@OutFishing13Matthew

2 жыл бұрын

Contact me at OutFishingThirteen@gmail.com.

@mikedeeds7129

2 жыл бұрын

@@OutFishing13Matthew how to order bearing kits

@OutFishing13Matthew

2 жыл бұрын

@@mikedeeds7129 Send me an email. See my ABOUT tab. I may or may not have any more of those bearings left. I need to check.

I have found a good gun cleaner works great on reels due to the fact most good ones today are make to clean well for poler frames and such...so..tip there I guess..works great so far anyway

@OutFishing13Matthew

Жыл бұрын

Thanks for the tip! I have heard that stuff works well from others.

Nice.

@OutFishing13Matthew

2 жыл бұрын

Thanks!

I like the two handles better.

@OutFishing13Matthew

5 ай бұрын

The double handles. Me too.

Zebco should sponsor you.

@OutFishing13Matthew

5 ай бұрын

A lot of people have said that.

Sorry for the stupid question but what exactly do the bearings do? Is the rod smoother, stronger, last longer? I'm 100% new to cleaning reels so idk.

@OutFishing13Matthew

Жыл бұрын

Yes. The bearings will make the reel smoother, stronger and last longer. But they are optional. Clean your reel every year and bushings will last for years.

@jdeax1982

Жыл бұрын

@@OutFishing13Matthew 10/4. Thank you!

What is the purpose of the bite alert switch on the zebco 808 boss hawk reel

@OutFishing13Matthew

2 жыл бұрын

It turns off the anti-reverse and turns on a clicker. Great for shore fishing or when anchored

Does the 808 saltwater zebco come with stainless steel bushings like the ones you changed out?

@OutFishing13Matthew

Жыл бұрын

I don't honestly know. It probably has plastic bushings.

Hey brother I'm trying to save a boss hawg 808 I have. Having issues with the drag working the way it should even at max drag. Any tips would be greatly appreciated sir!

@OutFishing13Matthew

Жыл бұрын

How can I help you? My guess is something went back in the wrong way or a part is missing. More details would help.

I have the 808 salt fisher, do you have a supertune vid on it?

@OutFishing13Matthew

4 ай бұрын

No, but I'd like to know the difference. I think you could use the same stainless steel bearings

Hi i see you work onzebco reels i am thinking of getting a 808 HD direct mount are they any good also can you super tune them as well

@OutFishing13Matthew

Жыл бұрын

You are talking about the bow fishing reel? Yes they are good reels and yes you can add bearings.

Working on my 808. I turn the drag all the way to the left so that line can come out, yet the line is locked down and will not come out. I'm eventually gonna get broken off by a big fish because i can't let it take drag. Any advice on how to get this right is appreciated.

@OutFishing13Matthew

11 ай бұрын

Did you take it apart and service the drag? That is the first place I would start.

@PProgress28

11 ай бұрын

@OutFishing13Matthew I took the drag apart and greased everything including all the metal and paper washers. Wish I knew more about it to be honest.

@OutFishing13Matthew

11 ай бұрын

@@PProgress28 after that the drag is still too tight?

@PProgress28

11 ай бұрын

Ok. Crisis averted. My issue was that I put one of the washers in the wrong way so the reel was not seated properly. This caused the c shaped retainer clip to be very difficult to install and remove. Once I took some time to pull everything apart and set it back in place, everything lined up flush and was easy to put together. That small eight of an inch threw everything off. If anyone is having this issue just take your time. Rewind the above video and put things back exactly the way Matthew did. You'll avoid frustration taking your time.

@OutFishing13Matthew

11 ай бұрын

@@PProgress28 So glad you got it figured out! It can be tricky the first time, which is why I made these videos. When I first took a reel apart, it was nerve racking.

Can u do the newest zebco 888? Ive been thinking about purchasing one.

@OutFishing13Matthew

Жыл бұрын

Sure can!. I may even supertune it so it has 4 bearings (3 +1) so it is like a Big Cat XT!

@farhenheit628of1200

Жыл бұрын

Thank you! I might dive into servicing and cleaning and super tuning! Thanks to your videos! My local Walmart has the 888 for a good price so I think I’m going to purchase it for catfishing. I am a big zebco fan now. I have the bullet and 33 platinum. Love them!

@OutFishing13Matthew

Жыл бұрын

@@farhenheit628of1200 cool. It is satisfying to fix an old reel.

Dear Sir I have Zebco Omega Pro Spincast Fishing Reel, Size 30 Reel (2011) but i'm so sorry it crashed one of the pins which encircling the line not doing its job it has three steel pin Stanley Head Assempley malfunctioned I wonder could I remove 1 pi,ck up broken pin? would the reel still work well with just two pick up pins? I am from Turkey best regards

@OutFishing13Matthew

Жыл бұрын

Yes, remove the broken pin. It will still work. Send me an email at outfishingthirteen@gmail.com

@hoylecasino

Жыл бұрын

@@OutFishing13Matthew Thank you I sent you email

@hoylecasino

Жыл бұрын

@@OutFishing13Matthew I have remove the broken pin. Now İt has two pin. ıt works thank you very much.

@OutFishing13Matthew

Жыл бұрын

@@hoylecasino well done!

Hello Matthew, just to let you know that I'm here

@OutFishing13Matthew

2 жыл бұрын

Thanks for stopping by and watching the latest video.

@edwardroberts2997

2 жыл бұрын

@@OutFishing13Matthew Matthew told you I would, Matt what does that reel sells for $-?

@OutFishing13Matthew

2 жыл бұрын

@@edwardroberts2997 As I recall, around $25. With shipping in the $30 range.

Hi can the 22 model be super tuned the last one they made. Cheers 🐊

@OutFishing13Matthew

11 ай бұрын

Yes. I am pretty sure the 22 Classic uses the same bearings as the 33 Classic.

@Gator1699

11 ай бұрын

@@OutFishing13Matthew

@OutFishing13Matthew

11 ай бұрын

@@Gator1699 Good luck. Those 22s are a rare nice find.

@Gator1699

11 ай бұрын

@@OutFishing13Matthew I didn't know that I got it of Amazon new back in 2012 about $40 delivered there aren't any around in Australia. Thanks Matt 🦎

@OutFishing13Matthew

11 ай бұрын

@@Gator1699 you are welcome

Mathew great vid I have2 zebco 888’si put 65 Lb braid on them can I send them to you to make them super reels I’ll pay for Everything please respond thank you

@OutFishing13Matthew

2 жыл бұрын

In the past the 888 already came with bearing. Did you check yours? Send me an email at outfishingthirteen@gmail.com

@waynemoody7354

2 жыл бұрын

@@OutFishing13Matthew I need your address again please

@OutFishing13Matthew

2 жыл бұрын

@@waynemoody7354 I emailed you.

That's got to be smooth but one handle crank for a reel that big?

@OutFishing13Matthew

2 жыл бұрын

It's actually pretty nice. I used it recently for cats and I like the power handle.

@terrydees5998

2 жыл бұрын

I would think there ought to be another bearing on that center shift. My super tuned 808 landed an 8 .35 pound common carp yesterday. They work well.

@Kaufeetimevideo

2 жыл бұрын

Checked out your video list. Amazed how many models and variations of those models made. I'm interested in the history of the vintage reels. I never needed to purchase new rod & reels as they were 1970's Zebco.

@OutFishing13Matthew

2 жыл бұрын

@@terrydees5998 I hear ya! I don't know why another bushing isn't in the nose so it can be replaced with a bearing???

@tannertuner

2 жыл бұрын

Those big Zebco reels have pretty much always used a single handle. I have an old 888 and it’s the same thing.

mine is not releasing line when you press thumb bar?

@OutFishing13Matthew

Ай бұрын

What happens after you let go of the thumb button?

@chrisjackson7625

Ай бұрын

@@OutFishing13Matthew nothing

Would like the address on ordering bearings

@OutFishing13Matthew

Жыл бұрын

Contact my using the About page. Send me an email. I will check if I have some more kits. It was sort of a limited time thing.

I would like the address to order the bearings, thanx

@OutFishing13Matthew

Жыл бұрын

Please see my About page and send me an email.

I would be lost trying to take it apart and put together lol

@OutFishing13Matthew

2 жыл бұрын

Glad I could help

those spinner cones and the 733 spinner cones rust immediately in salt water. I'm A OK with those bushings but I'd like a stainless scalloped spinner cone like they had in the past.

@OutFishing13Matthew

Жыл бұрын

Zebco has an 808 saltwater. Never used one

Try your you

@OutFishing13Matthew

2 жыл бұрын

You are welcome?

I was just curious to know as I watch this why did this guy spend all this extra time and money to buy these extra bearings to basically turn this 808 into an 888 would not have been cheaper just to buy an 888 to begin with I'm sure that by the time he went to Olive trouble first of all to purchase the 808 which is probably around $30 then pay whatever for the bearings plus the shipping then go to all the trouble of installing it he could have paid about $35 to start with and got an 888 go figure huh

@OutFishing13Matthew

2 жыл бұрын

Scott, You have a valid point. However, I do this primarily for the guys who already have an 808 and need to know how to service it and maybe want to upgrade it. You're right, It would be cheaper to buy an 888 that already has all the bearings. But there are a ton of 808s out there and some guys want to upgrade to stainless steel bearings.

China made?

@OutFishing13Matthew

Жыл бұрын

Yes, but still a great reel.