I did like your video ... Thank you for doing it .. I was wondering was that a Autel Universal key for a Honda vehicle ?? And if so what did you do about making a emergency key for the vehicle ??? Did like your video too .....

@aviglocksmith

Ай бұрын

Hey. Yes. I have different design for universal key and this design the customer chose. I'm using GTL flip key for the emergency blade.

Avi, thanks for recording this very useful video. Sometimes when you replace the ECM on some vehicles, the ECM itself needs reprogramming for it to work. Can the Autel KM 100 reprogram the ECM on Nissan & Kia vehicles?

@aviglocksmith

Ай бұрын

I don't think so. not that I know of.

I like your videos thanks for sharing, I am new suscriber, would like to know why the alarm did not off?

@aviglocksmith

9 ай бұрын

Hey. Thank you for the feedback. The reason the alarm didn't go off is because I picked the door lock and turned the lock. The vehicle recognize it as the emergency key was turning the lock therefore the alarm didn't go off.

Great video thank you

@aviglocksmith

10 ай бұрын

Glad you enjoyed it

Why didn't you record the depths when you picked the lock? Why didn't you use a Nissan look a like prox , instead of a Honda universial prox?

@aviglocksmith

Ай бұрын

I don't remember about the depths. I always show the customer a few type of options. This is what the customer chose.

Is it that easy to program Nissan Rogue 2013-2015 because a lot of have problems programming it

@aviglocksmith

9 ай бұрын

Hey. Yes. 14-18 have a defective BCM units. But when using Autel IM508, it'll read the BCM ID and will give you a list of the BCM types that are faulty. You just need to check that you're BCM is not on the list and you'll be OK. (on your own risk). After 2018 and before 2014 there's no risk.

Hi i have a customer with a 2019 nissan sentra will the im 508 be able to ad a key??

@aviglocksmith

3 ай бұрын

It should be able to.

Hello, Im trying to program extra key for my 2020 nissan sentra with my Autel KM100E, (will be using autel nissan universal key) but it keep failing at "Step 2: Get a Pin". when i check autels "guide" it tells me that i need some additional cable that plugs in into BCM in the dash board. I have a suspicion that special cable is for another atutel key programmer and not KM100E. When i go to youtube i found multiple videos where people (including you) were able to progam nissan key just with Autel KM100E. I also noticed that setting little different, and version of nissan soft ware is different, mine is "Nissan V1.71", where your version "Nissan V1.60". What do you think the problem is? Autel tech support is useless! :(

Where did you get your km100 from

@aviglocksmith

2 ай бұрын

Uhs Hardware

@liljones7613

Ай бұрын

@@aviglocksmithI just received mines how do you set up Wi-Fi for it can you just use hotspot on your phone and it will work smoothly?

@aviglocksmith

Ай бұрын

@@liljones7613 Yes. you can use hotspot from your phone.

Hi . Only obd2 port? Or need 40pin bcm nissan cable?

@aviglocksmith

10 ай бұрын

Hey. the entire key programming was OBD, no 40 pin cable.

@DFWAuto_Hack

9 ай бұрын

@@aviglocksmithi think Nissan 40 is 2021 - 2022 or ADC 2017 for smart pro

@aviglocksmith

9 ай бұрын

@@DFWAuto_Hack in this specific model 2020 Nissan Rogue I was able to program all keys lost without any adapter cable. I'm sure some of the models (Pathfinder and Kicks) needs that cable. Thank you for watching. Avi.

@DFWAuto_Hack

9 ай бұрын

@@aviglocksmith awesome buddy

@aviglocksmith

9 ай бұрын

@@DFWAuto_Hack Thanks for watching.

if the xhorse smart key is compatible with the Autel KM100

@aviglocksmith

10 ай бұрын

Hey. The Xhorse universal keys will not work with Autel. Autel makes their own universal keys and you can generate them with the Autel KM100.

@Locksmith8

6 ай бұрын

Hi! To be as specific as possible you CAN use Xhorse smart keys with Autel, but they have to be generated with the Xhorse programmer. You cannot generate Xhorse smart keys with Autel. Once the Xhorse remote has been generated by an Xhorse programmer, you can then use Autel to add the key to the car. And as always, thanks for you videos! They are very informative any helpful! Keep up the good work. :)

@aviglocksmith

4 ай бұрын

You're 💯 right

oh man yes its universal but why you use a honda style

@aviglocksmith

10 ай бұрын

Hey. Before I make the universal fob, I ask the customer which design they like the most. Customer choice.

@zxcdarel

10 ай бұрын

@@aviglocksmith ohh my bad customer choice

@aviglocksmith

4 ай бұрын

All good