I commented then continued to watch the video, so I have an additional comment. U have no reason at all to be half embarrassed at all. U all should be proud. Zip tie and Skinny pedal Sherri (SPS). Great channel with a healthy family in this insane world with the best context. Thanks guys

Craftsmanship is spot on and those long grab handles look sweet

That's cool of you sharing your progress of the older home converted to your garage. 👍🏻

Cool garage story, personally I think it’s awesome the way it is. So much history.

The cages look great. I like the garage and the history about it.

I have no freaking words damn them welds are beter than factory you guys are sick building cages and the grab handles are sick.

That's so awesome how she's there doing it up getting that cage going !!

Cool reuse of that house. Can never have enough storage! Great work on that cage for the orange SxS!

Love the cages. Real talent right there. Great job.

@TheCanAmCrew

Жыл бұрын

🤙🏻👊🏻

Great job. Love the design on the back 😊

Don’t go woke be happy with what you got that’s what what makes it good

Thanks for telling about your garage. Great story

Amazing work. Keep it up.

You do awesome work brother that looks great

That bumper is freaking awesome its my favorite

@TheCanAmCrew

Жыл бұрын

Thank you. Mine too haha.

Great Job! I also love the grab handles & garage story!

Awesome job on both cages. They turned out awesome. Keep up the great work.

i liked the grab handles. Neat story about your garage. You build some nice-looking cages.

@TheCanAmCrew

Жыл бұрын

Thank you 🤙🏻👊🏻

Great cages for sure 💯👍

The cage looks great! I though you were going to cut off the ends on the rear bumper so they wont snag anything. But it still looks great your one talented guy!!!! keep up the the great work and content!!!

@TheCanAmCrew

Жыл бұрын

We were going to but if we did then the lower bar below the brake light would have to be in the center of the brake light and wouldn’t like right. So to be aesthetically pleasing we had to leave it where it was so the lower bar would be outside of the brake light.

Wow, I have wondered bout the doors in the garage. Very interesting. Nice job on the conversion. Ur very intelligent and handy. Really enjoy ur channel. My absolute favorite. Thanks guys.

@TheCanAmCrew

Жыл бұрын

Thank you 👊🏻👊🏻

I mentioned in the last video, you needing a bigger garage. I follow with your restrictions. That's a shame. Pretty wild on the renovation of that home. Great job! And as for the clutter, that's what makes you guys great! You're just normal folks who know what you're doing. Awesome channel. I look forward to the next adventure.

@TheCanAmCrew

Жыл бұрын

Thanks man. Appreciate it.

Nice job on fabrication!!

@TheCanAmCrew

Жыл бұрын

Thanks 🤙🏻👊🏻

Those grab handles are sick! Appreciate the story about the garage. I like that you guys are personable and show/share personal stuff with us.

@TheCanAmCrew

Жыл бұрын

Thanks you 👊🏻👊🏻

u do good work

@TheCanAmCrew

Жыл бұрын

Thank you.

Keep up the good work ...thank you.. i notice you respond to every comment in some way .your a stand up guy with a good family

@TheCanAmCrew

11 ай бұрын

Thank you, I try to respond as best I can. 🤙🏻👊🏻

Thanks again for doing such an awesome job on my cage. Its everything i was hoping for then some, looks great and the build quality is amazing. Im sure it will get tested but have no doubt it can take it lol

@TheCanAmCrew

Жыл бұрын

👊🏻👊🏻

Great job guys you rock

@TheCanAmCrew

10 ай бұрын

Thank you.

Love seeing the builds as much as the rides. Tim & Amy's cage looks even better in person! This video felt like I'm hanging out with some good friends...really enjoyed it.

Move on to east TN!!! 😜

Wow the cage on Tim's machine looks great i like it the color really stands out with the black

You shouldn’t be 1/2 are any ashamed of your shop! You should be proud of what you done! Proud of your hard working ethics that your whole family has! It’s the American way. It’s here for us to take! Hard work is what you’ve done! Your receiving your blessing!

@TheCanAmCrew

Жыл бұрын

Thank you. I appreciate that 🙏🏻

Keep those cage videos coming love watching them come together

Really enjoyed the garage story. Never knew that was a house. Pretty cool idea, and I'm sure, it was a lot of work. Good job as always Crew!!

Thanks for giving us the run down on your garage/ house.... I always wondered why those doors were halfway up the wall... 🤨🤔🤣 How cool would it be to win the cage build! Somebody gonna get lucky, I hope it's me! I would love to advertise one of your cages... I like the full wrap around exo Skeleton style

@TheCanAmCrew

11 ай бұрын

🤙🏻👊🏻

Can't wait for the polaris build. I love how the whole family works together. Not enough of that these days. I also like the garage kind like an older industrial type look inside.

Personally i would not spend the money on cosmedic for a shop you hope to leave behind at some point. Looks like a functioning shop to me. I enjoyed you sharing the story behind the shops creation. I like the curved top cages but I really did like the flat top with the long grab handles. You all do some nice looking cages.

@TheCanAmCrew

Жыл бұрын

Awesome. Thanks.

Sherri’s lucky the only thing she got was a spark on the foot. PPE

Pack up scott and come down to wv

@TheCanAmCrew

Жыл бұрын

WV videos coming soon!!!

❤

i need a sticker for my hardhat!!

@TheCanAmCrew

Жыл бұрын

Message me your address and I’ll get one sent out to you.

@chadgummo484

Жыл бұрын

@@TheCanAmCrew 707 morningside ave altoona pa 16602

Cages look great!

@TheCanAmCrew

Жыл бұрын

Thank you

Excellent job, love watching y’all do it as a family 👍, I know about those shop cleanings, I have to clean in between projects or I can’t find my tools😅, great video as always

Thanks for the great content. When I bought my 2021 max I had a rattle I had a hard time chasing down because I would never suspect a dealer would let something off the lot like they did. The heat shield was rattling and fixed that but there was still that annoying rattle on the trails. Then the day came when I finally laid it over. Not a hard layover but it still just barely touched the rollcage and broke the plastic piece covering the rear mount on the rollcage. One bolt missing and the other three were crossthreaded and not seated at lest 1/2 to 3/4 inch. Immediately checked the other side and ond bolt was missing there. Replaced all the bolts and and inspected the cage. No damage at the time but after a a few weeks the paint cracked off a weld with no visible cracks but I know one just has to be there. You are quite a way from me but you do a great job. What do you charge for a cage on a 21 max x3

@TheCanAmCrew

Жыл бұрын

The cages do only come with 3 bolts in the rear of the cage for some reason. Always thought that was odd. Depending on what type of cage you want and how elaborate it will be would determine cost. Average is 1600-3200 for a 2 seater. 3 seater would be 2400-4000

Awsome job guys... still trying 2 hit that lotto.. im glad 2 see you guys busy with all these builds.. shows you guys do awsome work..!! What do you think on the new maverick "r"... ??? Keep on keepin on...!!!!

@TheCanAmCrew

Жыл бұрын

Thank you. I actually really like the new maverick R. There’s not much about it I don’t like and I can’t wait til I can see one in person and get in the drivers seat. I will say that I think it’s definitely got a place out west so not sure how well it will do out this way. Time will tell

@bstewy

Жыл бұрын

@TheCanAmCrew same here .. really wanna drive 1.. but here in nw ohio 77" is a bit wide.. I do like the trans better then the belt.. if had a 3rd petal I'd deff buy it.. was goin 2 buy a yxz but glad I went with cam an... way better machine..!!

love seeing the shop videos and builds. From start to finish for one cage like this how long does it take you? I also like how you see the start and finish in the same video, keep up the great content.

@TheCanAmCrew

Жыл бұрын

Since we’re not full time yet we need 1-2 weeks for a main cage and 2-3 for an exo cage build

@MrEsimmons178

Жыл бұрын

They look really well made. It’s nice to see someone building a quality product and not cutting corners. I like seeing the whole family helping out too.

Can you use rattle on the stock cage? I’d like mine to be red.

@TheCanAmCrew

Жыл бұрын

Yes you can. My cage (Jesse) is rattle can yellow.

What will you do with the new canam do you like it or not

@TheCanAmCrew

Жыл бұрын

I do like it. I’m excited to check one out in person.

what would a cage like the red one run me minus the rear bumper

@TheCanAmCrew

Жыл бұрын

A cage just like Tim’s with a front bumper only would be about 2200.00. Painted and installed.

@mikeorr8994

Жыл бұрын

So a full cage like yours I'm guessing 2500?

@TheCanAmCrew

Жыл бұрын

@@mikeorr8994 a full cage with rear bumper is about 3000.00. It required more bungs and tie ins to the frame or pull plate and more bends to mess with.

How tall are the b pillar tubes?

@TheCanAmCrew

4 ай бұрын

Around 6 1/2 Inches

@michaelward6755

4 ай бұрын

@@TheCanAmCrew you wouldn’t happen to remember what angle the A pillar is cut at would ya?

Hey Jessie are you strictly doing can am cages or would you consider doing a talon?

@TheCanAmCrew

11 ай бұрын

We would love to add a talon to our build list. We have can ams, KRX and rzrs so far.

@tomsturdevant2923

11 ай бұрын

@@TheCanAmCrew I’m like 3-3/12 hours away from you I’m going to be at Ben Franklin range September 23 ..let me know and I can give you my cell but definitely interested in having you look at it!!

@TheCanAmCrew

11 ай бұрын

@@tomsturdevant2923 ya for sure, send me an email at thecanamcrew@yahoo.con and we can go over details there.

How long did it take to do Tims? When I eventually roll my 2023 xrc I would love one of those cages……. Great work CAC.

@TheCanAmCrew

Жыл бұрын

We need 2-3 weeks to build our cages. We’re not full time just yet.

@oldmanbs1

11 ай бұрын

Love the look of your cages, the videos and the great family interactions.

I have a 23 rc about how much does a cage like the first one on this video?

@TheCanAmCrew

Жыл бұрын

There’s a few variables as far as grab handles, roof, gussets, intrusion bars and paint or powder but you’d be around 1500.00 or so

@damienstark6901

Жыл бұрын

@@TheCanAmCrew thank you for getting back i for sure might be getting back ahold of you with plenty of heads up . I’m not in any hurry at all

How much for a 2021 can am maverick x3 turbo rr 4 door .

@TheCanAmCrew

7 ай бұрын

There’s a lot of variables that go into the price of a cage. A basic cage would start at around 2400.00 for a 4 seater. If you’d like to discuss it more please send me an email at thecanamcrew@yahoo.com