2020-21 Chevy/GMC HD 2500/3500 Curt 5th wheel hitch Install And Review!
Автокөліктер мен көлік құралдары
2020-21 Chevy/GMC 2500/3500 Curt 5th wheel hitch with prep package! Install and Review 20K! How much will it squat?
I am a Amazon Associate. Thank you!
Curt A20 16092 is the hitch I have here is Amazon link: www.amazon.com/gp/product/B08...
Пікірлер: 51
Absolutely the most helpful video with what we real people need to know about this hitch and setup in 10 quick minutes. THANK YOU! Love that you addressed the question about bed length and slide requirement. Saved me $500 and probably another half hour of assembly time. :)
Gave you a thumbs up for rockin' the flops!!! Great vid BTW.
@DURTYMAXLML
2 жыл бұрын
Thank you! I'm always rock'n the flops!😎👍
Spot on video. Purchasing the same set up now and appreciate the focus on the spring in the handle
@DURTYMAXLML
2 жыл бұрын
Right on Thank you Robert!
Thanks for the info looking to upgrade my truck so now I know what I need to know!
@DURTYMAXLML
Жыл бұрын
Any time! Thank you Greg!
Make sure you put some grease on that 5th wheel before you move it.. I'm still trying to decide if I want gasser or diesel, diesels add a lot of weight to the payload of the truck... Gas you can have more trailer thanks for the video also had a friend tell me always go 8ft bed, short bed you need a sliding 5th wheel because of a short box for tight backing the nose of the rv can hit the cab, have you run into this? I been pulling tow behinds not 5th wheels
Great video. Well done
@DURTYMAXLML
2 жыл бұрын
Thank you skip!
Lol I’m not sure if clovers cover ass lol that’s awesome bro
Fifth wheel nose cones are so rounded now, you don't need a slider hitch. Back in the day fifth wheels were more square up front. I just stumbled across your vids, so I'm not too familiar. I worry about the leveling kits. You can make it ride nice with upper control arms. The big issue for me is the pitman arm and the idler arm. Those needed to be replaced multiple times on my "05. I didn't do it again on my '15, and I won't do it on my 2020.
@DURTYMAXLML
2 жыл бұрын
You're absolutely right! Cognito figured out a fix for the GM idler arm and pitman arm. It's Simple bracket I which GM had thought of it! Here is a link to cognito! cognitomotorsports.com/cognito-forged-pitman-idler-arm-support-kit-silverado-sierra-for-20-21-silverado-sierra-2500-3500-2wd-4wd.html Thank you Jay!
I’ have Silverado 3500 2022 with curt power ride 30 k for my gooseneck needs an adapter very good 👍 I love my Silverado
@DURTYMAXLML
2 жыл бұрын
It's good to know they have a 30k available. Thank you for watching and supporting Roberto!
THANKS
@DURTYMAXLML
2 жыл бұрын
You're welcome! @Mario!
wider view or adjust up
How is the short bed working when trying to make a 90 degree turn? Dealer told me I’d need a slide hitch of I buy a short bed and now I’m thinking I need a king bed truck.
Thank you for posting, very good video. I bought the same A20 hitch (OEM puck setup) for a fifth wheel that we are purchasing. Does the king pin extend past the front of the RV cap? stressing a little over the clearance to the cab (Open Range, rounded cap), we are picking up our new fifth wheel in another state, and the majority of people online are saying that i should get a slider hitch. (2022 Denali HD, standard 6'10" bed) Thanks!
@DURTYMAXLML
2 жыл бұрын
The Kingpin extends 1ft shy from the tip of the front cap on the Reflection. Not sure about the Open Range 5th wheel. Although I do know there very nice! Congrats!!! It seems as though the New 5th wheels are getting better about front cap placement to improve turning radius. I'm not sure that you will need a slider hitch, Please let me know how everything worked out? Thank you for watching my video Michael!
@emeraldcoastcottage
Жыл бұрын
Did you need the slider?
@michaelgates8331
Жыл бұрын
@@emeraldcoastcottage nope, works great. Thanks again for the video!
Trailer weighs 6900 27 feet long. Keystone cougar
Are you running the short or long bed?
How do you know how high to set the hitch to ensure bed rail clearance? Thanks for the helpful video.
@DURTYMAXLML
11 ай бұрын
I would start at its highest setting at 17 inches!
I have 1500 Chevy rocky ridge lift kit I think k 6 inch any suggestions for 5th wheel hitch
Does anyone know if this hitch fits the 2024 models?
ALWAYS check the JAWS are closed!!!
@DURTYMAXLML
2 жыл бұрын
Yep you can never be too careful! Thank you Jeff Dirt!
@alwhitney5665
11 ай бұрын
And, do a tug test.
I have a 2020 2500HD GMC Denali 6'10" bed about to upgrade to Reflection 5th wheel will i need a slider hitch little concern about clearance or making 90 degree turn?
@DURTYMAXLML
2 жыл бұрын
You're better off spending the extra money and getting the slider hitch! It's better to have it and not need it, than need it and not have it! Thank you!
Have you put a padlock on it where you attach to bed instead of a pin . I was wondering about theft leaving it like that
@DURTYMAXLML
Жыл бұрын
No I have not, that is a really good idea. It does stay under a fairly secure tonneau cover. And the hitch is pretty damn heavy! If Somebody wants to take it they better have a real good chiropractor!🤣
Hi - I have a 2021 2500HD shortbed as well and just bought a 41" Dutchmen Astoria 5th wheel.. would you recommend a slider system?
@DURTYMAXLML
Жыл бұрын
It's better to have the slider system. I can pull a full 90° on flat ground, although on some inclines and declines at certain campsites it is possible for me to make contact with the top of the cab. I just know from experience when I did have the slider system I never used it! Also very important, if you do use the slider hitch you need to make sure that your PIN box doesn't make contact with the tailgate of your truck. I'm most positive on my truck if I used a slider my pin box would make contact with the tailgate. I know it's confusing there are so many variables.
I have a 2020 3500HD high country dually and I purchased a A30 curt 5th wheel hitch for it ... im curious how many inches do you have from bed rail to the 5th wheel when connected
@DURTYMAXLML
2 жыл бұрын
My wife told me as long as I've got six inches we should be alright! Lol! I'll get back to you on that!
@jameshamel7740
11 ай бұрын
Any luck getting that measurement?
Can you add the prep package or do I need the b&w hitch under the truck
@DURTYMAXLML
2 жыл бұрын
I honestly don't know if you can add a prep package or not if you find out please share. I heard the B&W is a very nice Hitch as well!
How heavy is that hitch. I was thinking about going reese goosebox.
@DURTYMAXLML
3 жыл бұрын
Curt A20 non adjustable is 134 lbs! Reese is a good hitch too! Let me know how it goes thank you J T!
Did you end up using airbags , how is bed rail clearance
@DURTYMAXLML
2 жыл бұрын
I ordered the airbags in August and I finally got them! Will be installing them in about a week. Video coming soon. Thank you JT!
What is the part number for the legs ? And hitch Head also ? Is it a Curt #16029 legs and head is curt #16540
@DURTYMAXLML
2 жыл бұрын
All do some home work! Thank you!
How can I get one in New Zealand
@DURTYMAXLML
2 жыл бұрын
Very good question! Let me know if you are able to find it Tony!