Simple when you explain it!!

Finally know what he is talking about thank you so much brother

Very good, many thanks!

Thank you for this video

What is the HONDA PART NUMBER FOR THE TRIHEDRAL?

Hello and thanks for the videos! You say in the video that autel targets have the wrong dimensions and the quality is bad. Is that true? can you make a comparison video with some examples? I am thinking of buying autel as they have the biggest coverage.

@adasaimingbyjackshort2123

6 ай бұрын

Hi. The Autel is a good Target system it works on all cars sometimes it has a problem only on some select Mazda cars

@christoforosvasileiou243

6 ай бұрын

Could you give some examples on the mazda issues?@@adasaimingbyjackshort2123

@pablohernandez4881

3 ай бұрын

It does not work with Mazda because the Mazda target is smaller I do have a autel set up and works great have also TEXA system comes with 3 different sizes of cones for different brands also have a Toyota factory target

if you start the process for recalibration and you get out the middle obviously nothing going to be saved that's mean everything need to be start from the beginning There is a way to know the numbers as the come from factory and put back as the beginning and put it on the thecstream?

Where did you purchase the laser target with the white tube

@uar8836

2 жыл бұрын

I'd like to know this too

@albertgiles5128

2 жыл бұрын

@@uar8836 I was told by someone else that they bought it from Honda dealer.

@uar8836

2 жыл бұрын

@@albertgiles5128 thanks

@CN-zi7cw

2 жыл бұрын

I had to do recalibrate on a Camry axis beam sensor and I made my own reflector target. It worked fine.

@albertgiles5128

2 жыл бұрын

@@CN-zi7cw what scanner did you use . I’m sure it’ll work fine it’s really just a laser target . Adas kit is super expensive. I know someone that has homemade kit and he’s been doing some calibrations for ppl here and there

My RAV4 2017 shows alert "BSM malfunctioning" studently while I was driving. Does anyone know how to tell 1) the BSM part is bad; or 2) need re-alignment? There are two parts, left (master) and right (slave). How can I tell which one is malfunctioning? Thanks.

@adasaimingbyjackshort2123

Жыл бұрын

Hi the only way to know for sure is to read the diagnostic codes with the scan tool , they don't get misaligned unless you got into a minor scuffle and something hit your bumper you need a physical force to push it out of alignment,

@all4roc777

Жыл бұрын

@@adasaimingbyjackshort2123 Ok. Thanks for the quick answer. The BSM sensor cost $800+ plus 2-hour labor work. I may go ahead invest $ to buy a scan tool.

@adasaimingbyjackshort2123

Жыл бұрын

Hi, if this is your personal car and you're only interested in working on your Toyota I would suggest to get the Interface from Drew tech design for Toyota it's about $400 then you can sign up for Toyota software diagnostic service manual and repair for just a few days you will have the same access as the professional dealership ,

Hello, please can I know how to get this piece

@adasaimingbyjackshort2123

Жыл бұрын

Hi adasaiming.com

Do you want to sell your autel?

U030057 Internal Control Module Software Incompatibility Invalid / Incompatible Software Component How can i fix this

@CarAudioMontrealMontRoyal

3 ай бұрын

Replace it for new piece. You cannot use used. :-)

What is the software name you are using

@ALANFL

19 күн бұрын

Did you find out the software name?

Where is your shop?

@adasaimingbyjackshort2123

Жыл бұрын

Hi, we are located in sunny Cape Coral Florida, However our shop is not open to the public we are a service provider for the collision and automotive industry,

how to get a software from tis?

@adasaimingbyjackshort2123

6 ай бұрын

techinfo.toyota.com/

Still not OE. Hack job