2019 - 2024 + Chevy / GMC Truck 5 Channel Amp & Sub Install
Автокөліктер мен көлік құралдары
Parts linked in the description below!
Watch a full tutorial as a 2024 Chevy Silverado will have a 4 channel and mono amplifier, along with two 12" subwoofers installed. We will be using an Audio Control LC-4.800 and LC-1.800 to power our system while bypassing the factory Bose audio sound system.
NOTE: Our GM Truck was equipped with the factory BOSE audio sound system. We will be completely bypassing the OEM amplifier to install our new equipment. IF you do not have Bose, we can link those corresponding parts in the description of the video.
This video applies to GM Vehicles such as Sierra, Silverado, Tahoe, Suburban, Avalanche, Yukon, and Escalade models for years 2019, 2020, 2021, 2022, 2023, 2024 and newer. This video also includes rear seat trim and panel removal, amplifier rack and wiring, and installation and testing.
*For the front door speaker install, click here:
• Chevy / GMC Truck Fron...
*For the rear door speaker install, click here:
*For a mono amp and sub install video to the Bose system, click here:
• 2019 - 2023+ Chevy / G...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*AudioControl LC-4.800 4 Channel Amplifier: amzn.to/45JWKiR
*AudioControl LC-1.800 Mono Amplifier: amzn.to/3ROOFUg
--Alternative 5 Channel Amp: AudioControl LC-5.1300:
--Alternative 5 Channel Amp: Kenwood 5 Channel: amzn.to/3tjoj3a
*Sounds Good Stereo Amplifier Rack (non paid): soundsgoodstereo.com/products...
*Custom Subwoofer Box for two 12" Subs: www.soundoffaudio.com/2019-23...
--Alternative Subwoofer Box option:
--Skar Audio 12" Empty Single Sub box: amzn.to/3RUEYDJ
--Skar Audio 12" Empty Dual Sub box: amzn.to/4bmj8QB
--Skar Audio Forward Firing 8" Empty: amzn.to/45MstQk
*JL Audio 12W0v3-4 Subwoofers (not available on amazon)
--Alternative Subwoofer Suggestions:
--Kicker 12" Shallow: amzn.to/3XSSoDU
--Skar Audio Shallow: amzn.to/45JDjXv
--Skar Audio 12" Loaded Single Sub box: amzn.to/4eLemyQ
--Skar Audio 12" Loaded Dual Sub box: amzn.to/3W4l8bv
*Axxess AXDSPX-ETH1 / BOSE Bypass Harness: amzn.to/3L87gqE
*AudioControl ACR1 Bass Knob:
*Stinger 4000 18" RCA cables (3x): amzn.to/3VOu0Rf
--OR Male RCA Couplers: amzn.to/3xQDaEV
*Skar Audio 1/0 OFC Wiring Kit: amzn.to/3hlbZdo
--OR if you need a 4 gauge, here is an OFC kit: amzn.to/31f0r2U
*Extra OFC 4 Gauge Wiring: amzn.to/3Vw1eDo
*Recoil Fused Distribution Block: amzn.to/4btP05R
*Recoil Grounding Block: amzn.to/4btP05R
*IF you do not have the factory BOSE amplifier, here are the parts needed (instead of the Axxess AXDSPX-ETH1):
*Pac LPH-GM72 Radio T Harness: amzn.to/3RQPGuO
*AudioControl 5/6 Channel LOC: amzn.to/45MrAY0
*9 Conductor Speaker Wire (2x): amzn.to/3xK4PSk
Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases
Пікірлер: 28
Parts used and recommended in the description of the video!
@zacharybatey4266
12 күн бұрын
Any issues running door speakers of a 4 channel and door chimes and other factory sounds being extremely loud? I have a 2024 Silverado non-bose.
Clean install
Awesome work! I always learn something when I watch your vids. Thanks for sharing.
I bought a Audio Control LC1.800 to run my JL Audio stealth box with 2 10W1 subs. The amp/sub combination sounded amazing. The amp reproduced a clean tight bass response for about 3mo. After the 3mo the amp became noticeably quieter and the bass response lost a small amount of clarity. I sent the amp into Audio Control (Stinger). They sent a brand new replacement. I never hooked it up because I bought a Fosgate T1000-bdcp amp to replace it while I waited to get my Audio Control amp back. The Rockford Fosgate provides a deeper more powerful punch so I left that in the truck. I have a pair of Image Dynamics ID12v3's that I want to do an old school stealth install. The Audio Control LC1.800 has a small footprint so it will be perfect and will look amazing when you remove the mesh panels. I have always hidden all my wires but the wire work on your install is beautiful and looks amazing. The wires add to the appearance of the equipment and just look fantastic.
As difficult as it is to remove back seats, hope they don’t ever have to adjust the amps 😂
Clean install. How would you go by doing the same thing except using the DSP? I have a Audio Control D4.800 which has the DSP integrated already on it. I'm just starting to get into car audio so I still have a lot to learn. Thank you or anyone that helps.
can the amp rack work with a non bose truck?
@ProvoBeastAudio
24 күн бұрын
Usually non-bose trucks don't have the mounting spots on the back wall where the bose amp usually goes. My suggestion is to pull the rear seat out and see how it would mount. If it does still work, let us know!
Does anyone make amp racks for 08 GMC crew cabs like this to ade the installation of amps
So is the AXDSPX-ETH1 Ethernet like the JL Audio fix 86 except without the harnesses
@ProvoBeastAudio
24 күн бұрын
The same on the level of a DSP, but very different as the JL DSP requires you still to keep the Bose amp installed (so it can still communicate with the OEM radio) and you'd tap into the factory amp outputs for signal. Axxess piece totally allows you to remove the factory amp.
What if i wanted to connect my factory Sub. Not looking for serious bass. Just better sound out of my speakers. Great tutorial btw
@ProvoBeastAudio
3 күн бұрын
I wouldn't add more power to the OEM sub unless you replace it. It's rated for the power it's being provided.
Do I need to use the DSP to bypass the stock Bose amp? Or can I just use something like the LC5i pro? Or is it just easier to use the DSP?
@ProvoBeastAudio
3 күн бұрын
Yes, in order to completely bypass and remove the Bose amp. You can use an LC5i but you will need to tap in AFTER the amp, keeping the OEM amp installed.
How not to amplify the chimes
@ProvoBeastAudio
3 күн бұрын
You can turn the chime down in the settings of the DSP.
What kind of warranty implications could this set up potentially cause? Have a brand new 24 and the Bose lacks so its getting some sort of upgrade. Only thing I could think this potentially, if it caused and issue is the Warranty with the head unit? Am I being overly cautious?, appreciate feedback.
@ProvoBeastAudio
14 сағат бұрын
It's always a risk, but does the risk outweigh the added new features? Fortunately, you are not cutting ANY wiring, so if you do have issues, you could always plug the bose amp back in.
@jasonzimmerman288
8 сағат бұрын
@@ProvoBeastAudio Appreciate the feed back.
What do you lose if you remove the bose amp and just try to run the Lc5?
@ProvoBeastAudio
3 күн бұрын
You can't, all your chimes, notifications, and other necessary data connections, run over the data ethernet canbus. Removing the factory amp will cause issues with other electronics in the truck.
Do a video of a 2021 Suburban install. I can't find any good detailed videos :(
@ProvoBeastAudio
3 күн бұрын
It's a very similar process in most instances, but i'll do one as soon as one comes through the studio.
Does anyone know if there a harness for non-bose that will send the signal back from the 4-chan amp to the speakers?
@ProvoBeastAudio
24 күн бұрын
There is, and it's linked all in the description of this video. Go check it out.
@juangarza6271
24 күн бұрын
The one linked on the description is the black/gray connector. Mine has the aqua/beige connectors. I know there is a T-harness to add a sub/amp but haven't been able to find one to also add a 4-chan amp and send back the signal through original wires.