"plug and play just switch them around" lololololol

@bigbanka5572

2 жыл бұрын

😂🤣

@bigbanka5572

2 жыл бұрын

Pinned!

@beausky4100

2 жыл бұрын

does it need for relays?

@petersolex2170

2 жыл бұрын

@@beausky4100 no

@aleksandar78radojevic

9 ай бұрын

You tied all three wires to the connectors on the turn signal?

Thats actually better looking than most cars that have them from factory, great job bro👍

LED’s are the ones that are safe to touch halogens blow when you touch the bulb because the oil from your fingers ruins the gas in the bulb

@DemeDemetre

2 жыл бұрын

yeah

@truthbeknown8550

2 жыл бұрын

Halogen bulbs are so hot that the glass has to be perfectly clear and clean because the slightest fingerprint smudge will partially block the light from escaping and that causes heat buildup and glass cracks from too much heat. The COB (chip on board) LED headlight bulbs also generate heat, sometimes as hot as a hot cup of tea, which one shouldn’t touch needlessly if one can avoid it

I love you bro👌exactly the confirmation I was waiting for😊thanks!

These look so nice! Thank you for the video! I'm making little upgrades to my LE and this is next on my list

Can you tell me- can I put this stripe over my lights where I already have a fabric led stripe on top of headlight, but this one is way prettier. Does it mean if I put this kind of additional light on car, it will substitute some initial bulb, or I can have all lights I had before plus one additional more? Thanks

I think it's a good addition to any car. It Looks really cool 👍🏼

@bigbanka5572

3 жыл бұрын

SAME HERE!

I did the same installation but my amber lights wont work properly im wondering maybe because the one that i bought dont have the black box fuse

OMG I’ve been waiting for someone to show me how to install these! Thanks dude!

Excellent job man, very clean and good looking results too. 👍🏻👊🏻

I have wired the day running light the red wire to a switched live in the fusebox black earth to body and yellow to indicator live wire the indicator doesn't work when the day running light part is on but does with hazards or when I lock car any ideas why it doesn't indicate when the running light is on

Iv fitted these to my car , I put the red wire straight to the ignition feed in the fuse box and the ground to the chassis then found my indicator wire the lights work fine so do the indicators but wen I start the car the indicators don’t work but the drl still light up?

Need some help! I have these and wanting to connect to my vw transporter 2006 ( uk ) the indicator bulb just pulls out and not attached tk any cables at all. Could I just connect the led strip to my headlight bulb if so would the indicator still work on the strip or does it need to be connected to the indicator bulb? Cheers and great video.

Thank yoy for this video. The installation worked out well. Looks AWESOME !!!!

@bigbanka5572

2 жыл бұрын

Thank you so much!

Need help to idendifiy wire color codes. My car is 2021 Rav4 on driver side wire color for turn signal bulb are green, green/black and white/black. passeger side are red, red/black and white. How to connect with the strips

Complete noob here but can I use any strip lights for cars on Amazon and they'll pretty much have same setup right?

How long they last? And how do you remove them that's a very sticky glue?

Any Idea on how to do it for European cars like audi? Bc the battery is at the back not in the engine bay!

Great video! straight to the point! Good info, clear audio and smooth filming! helped Alot!

Thank you this video helped and made my rav4 look amazing!

@IansDad99

3 жыл бұрын

You sitting behind the wheel, or anywhere inside makes it look very nice too. :-)

@joelbautista04

2 жыл бұрын

How did you do it, this guy didn’t show us how to tap it in its bs

Do you have can bus problem on instrument table, when you connect LED strip?

My car is a nissan 300zx Z32 model. My car is not DRL OEM. I noticed I have a pair of Fog lights that have been removed but the connections are still there, there is a white and black from the old fog light connection, I just want the white DRL light not the Amber to work so the current amber hooked to the car will work via its OEM, so based on this which wires do I connect to the old Fog light connectors which are black and white and will it work if I only connect the DRL white not the amber. Thanks excellent work

Where do you get those 3 red wire connectors

Bonjour les 3 files de mon clignotant sont tous de la même couleur gris vous avez une idée ? comment les branché ? Merci

Oil from fingers does in fact affect halogen bulbs. You have your facts mixed up.

@bigbanka5572

4 жыл бұрын

Matthew Martin yes

@ashleyfernandez1035

3 жыл бұрын

came out amazing for me

Just ordered these ! Let me know how it’s holding up after 3 years year ? I’m super excited I love this look

The way the turn signal flows with the stock turn signal looks amazing

@planetina1145

2 жыл бұрын

It's called Sequential Turn Signal. Usually a yellow wire and red and black

These drl have RL and E marks? To be legal in europe?

Looks nice, my cherokee already have some but if not would put them on

So you only need to wire tap the three wires going into each signal light and that also makes the white L.e.d' s light up too even though they work from a different switch ?? 🤔

@WhatIfWeAreCharacters

3 жыл бұрын

It's because the DRL on this one double as an indicator

I prefer your wiring method by just using the wiring already provided for all three leads. Was there any long-term issue with any fuses blowing or not being happy with the small extra load of the LEDs? Thanks in advance

@bigbanka5572

3 жыл бұрын

No everything’s been fine I’m at 50k miles and a lot of nighttime run time. Voltage in the car has never changed (I have a voltage meter) all good

YOU HAD ONE JOB THE WHOLE TIME

How this can be do in mazda 6 2003 sedan model

You are the man. Thank you from the future😂

If anyone has any other DIY request Comment down below!

@bigbanka5572

3 жыл бұрын

@Hatori Ibuki how was this not more than 50%

@bigbanka5572

3 жыл бұрын

@Hatori Ibuki Everyone is fine with the tutorial just let me know what’s your issue

@fbgwedgie

3 жыл бұрын

Where did you buy the strip?

@bigbanka5572

3 жыл бұрын

@@fbgwedgie link in description

@layson0077

3 жыл бұрын

Were can i connect the red color wire? Can it be connect together with the signal light woth the color yellow wire.. my car is a toyota CHR..

Where did I get those red connectors please lmk. Thanks.

When i turn on car LED stripes off but when i turn off car then leds start light

Thank you for the video. Question, my headlights have a sharp turn(angle) and I wonder how flexible is this strip when laying flat. It will lay almost like yours but I need it to curve a little more

@bigbanka5572

Жыл бұрын

It should be okay to curve. What car is it for

@bosanovaboy

Жыл бұрын

@@bigbanka5572 Hyundai Tiburon

If I want to use these lights for DRL, can I just wire it to the high beam light (since it’s also the drl light) and it would work? I believe it gives our 6volts so I’m sure if that would be enough to power these strips.

@bigbanka5572

3 жыл бұрын

Yes you can do that also Signal was just easier access for everyone to get it working all in one

@nanowar1192

3 жыл бұрын

not worth it for DRL since it not really that bright in sun light, but really help at night. I have it install in camry 2016, and rav4 2020. the strip on the camry is old and hazed quick, but still work and look great at night.

@joelbautista04

2 жыл бұрын

@@nanowar1192 was it difficult on the Camry? I have a Toyota Camry 2017 se

Looks nice and easy. Thank you. What size amp wire taps are those? Also, would these wire taps corrode if they're not weather-proofed from humidity?

@bigbanka5572

3 жыл бұрын

That’s a good answer I’ll check on them tomorrow to let you know but I don’t have them taped or anything

where did you buy that stripes signal light,thank for answer❤

Hi mate i did the same for my citroen c1 , but have one issue. When i use only the turns they work. But when day lights is on and i start some of the turns left or rights, the just flash one's and stop it. I take the negative and plus fron side lights and second plus from turns. Where is the issue???

@bigbanka5572

3 жыл бұрын

If you can show me a video I can figure it out maybe

In my 2022 RAV4 it only has two wires, green and white with a black line

I'm gonna do this minus the dlr since the hybrid already has them.

Which could you recommend for Toyota Highlander 2018? And how can I to install them? I hope your response, you got a new subscriber 🎉

Could i get rid of the original signal bulb and just wire the led strip directly to the headlight?

@bigbanka5572

3 жыл бұрын

I don’t see why not youd just have to check out the wiring

I added these to me Scirocco and it works when you turn the key once but once the ignition is on it switches off, I'm assuming because my car is giving more than 12V power once its running so the LED strip switch off, is there anyway around this?

@quinjones6620

3 жыл бұрын

Yes get a compasiter

@MegaZeb786

3 жыл бұрын

@@quinjones6620 what is that?

What’s the name of those red things you use to clip the cables to the light harness?

@bigbanka5572

4 жыл бұрын

Pablo Nunez Wire taps amazon sells a kit of them for like $8

@muhammadsolehinshamzol8221

3 жыл бұрын

@@bigbanka5572 thanks man, im trying to use it on superbike and see how it goes 🤣

Bro what are the clips called pls? My pack did not come with a clip...also, do i need to make a cut on the wires for the turn signal or i just attach the clips?

@bigbanka5572

3 жыл бұрын

TICONN 240PCS T-Tap Wire Connectors, Self-Stripping Quick Splice Electrical Wire Terminals, Insulated Male Quick Disconnect Spade Terminals Assortment Kit with Storage Case (240) www.amazon.com/dp/B07MLPBPW5/ref=cm_sw_r_cp_api_fabc_z.BPFbWHM7ARK?_encoding=UTF8&psc=1

It absolutely will affect those bulbs....but do you

Hi what are those small red things you have on the wires to connect to the turn signal light? The ones youre putting on at 1:51

@judemarkortega4854

2 ай бұрын

T connectors

Can i connect ti to position light or what its callen instead on headlights?

@bigbanka5572

3 жыл бұрын

Yes you can

What are the clips called thanks

Mine signal work but the day light ddint work so i wire tap my day light to headlight and it work..

@bigbanka5572

3 жыл бұрын

What car

Love these LED strip lights, my only concern, here in the UK, when you jet wash your car, eventually, those strips will come loose at the worse possible time!!

Also is there any way that I can connect these somewhere when the cars turns on, these should turn on too

@bigbanka5572

3 жыл бұрын

So the best way for that is to connect it to a DRL bulb anything that’s always on regardless.

can you also give me info on the wiretap and the wire that you use? I bought some on amazon and it seems the tap is too big and the wire is very small it didn't cut to the core of the wire when closed.

@bigbanka5572

3 жыл бұрын

I ordered the wire tap kit

@bigbanka5572

3 жыл бұрын

TICONN 240PCS T-Tap Wire Connectors, Self-Stripping Quick Splice Electrical Wire Terminals, Insulated Male Quick Disconnect Spade Terminals Assortment Kit with Storage Case (240) www.amazon.com/dp/B07MLPBPW5/ref=cm_sw_r_cp_api_i_oCoOFbM2T3MBT?_encoding=UTF8&psc=1

For led strip’s running light (red one) wire, don’t you have to tap to head light wire? I just wonder how does the led strip’s running light wire works just tapping to turn signal wire..

@bigbanka5572

3 жыл бұрын

Peter Kim if you want DRL running you need to tap the drl I did the signal

@peterkim2987

3 жыл бұрын

BIGBANK my car doesn’t have drl.. where should i tap the drl to cars don’t have oem drl?

@bigbanka5572

3 жыл бұрын

Peter Kim tap them to the headlights or any light that turns on when your headlights are on Orrr if you want Drl you can wire them to a fuse

@peterkim2987

3 жыл бұрын

BIGBANK A i see. Thanks!

@TheAcydbuzz

Жыл бұрын

@@bigbanka5572 Yeah, that's my preference. On any acc power. I like to run them w/o the headlights as my car doesn't have DRLs

Hi.. Could you give me the name of a good brand for these LED LIGHTS because most of them are just cheap replicas. I wanted to buy one from a good company.

@bigbanka5572

3 жыл бұрын

Link is in the description

Is it possible to do this for the 2017 Rav4?

@bigbanka5572

3 жыл бұрын

Yes possible on any make and model

I put the red and black on the pos and neg of my low beam(ones that you put on at night) and I’m having issues. I guess I have to put it on my drl bulbs?

@bigbanka5572

3 жыл бұрын

What car?

@CriCKiD3

3 жыл бұрын

@@bigbanka5572 2014 Camry. It’s tapped into the low beams so it only turns on when the lights are on and if you turn the signal on the lights flash with its should I change it or just change the ground idk

' wow that coool and safety turnning signlights... how about rear taillights and door

Will this work on any car? Ive got a opel insignia. Just wondering if i could do the same thing just taping it to turn signal. Thanks

@bigbanka5572

3 жыл бұрын

Yes

@bigbanka5572

3 жыл бұрын

As long as your turn signal has 3 wires

@WhatIfWeAreCharacters

3 жыл бұрын

I have a chevy aveo, tapped the LED light into the parking light and the signal wire into the signal

@Ferjim77

2 жыл бұрын

@@bigbanka5572 Mine just have 2 wire, I install led strip, and work fine, until I turn the lights and use the turn light, flashes just ones then both lights (white or ambar) stops, until I turn off turn signal, white light came back. Can something extra be install to prevent this issue.

Can you show us what wires u tapped in for the left side?

@bigbanka5572

3 жыл бұрын

I can go down tomorrow and check

How much amp does the led drl strip takes???

@bigbanka5572

3 жыл бұрын

Not much I can try and find out exactly but my vault meter hasn’t changed still reads 13.8

Does anyone know if there are any drl stripes That are non sequential ?

@bigbanka5572

2 жыл бұрын

Hmm there should be I’m not 100% sure

Question will the t-tap affect the wire in the long run ?

@bigbanka5572

3 жыл бұрын

No it’s safe!!

@PlastiBots

3 жыл бұрын

Corrosion will set in over time as t-tap expose the wire. Been there. Done that.

@josecastillo1223

3 жыл бұрын

It is safe but it will eventually corrode the wires. Btw if you are still planning to tap the wires, DO NOT do it so close to the plug/socket. Give yourself room for error and space to work, maybe offset the taps a bit too. I’m sure it must’ve been tough to fit all the taps so close together, now imagine having to service that in case of failure. Lastly dielectric grease might help with corrosion.

You should put LED bulbs in as well! If I want these on the taillights: I dont want the white light on the tail, can I just use the amber?

@yunghillz3186

Жыл бұрын

Just buy the red and amber ones then

Hello I want this led strips on my car,only for turning signal but i have a warning system.So my guestion is do your car show warning about blown bulb or not.Thanks for answer

@bigbanka5572

3 жыл бұрын

I don’t think so you should be fine

@sobeslavi.2526

3 жыл бұрын

Ok thank you for fast answer 🙂

@bigbanka5572

3 жыл бұрын

@@sobeslavi.2526 of course no problem

I have a Ford focus mk3, I installed some drl strips from aliexpress, the drls work great as I unlock the car.. As soon as I turn the ignition on and the car starts, the drls are flickering and don't work. Please HELP if someone knows how to fix this .

@bigbanka5572

3 жыл бұрын

How do you have them wired ?

@user-xs3it3ww2t

3 жыл бұрын

@@bigbanka5572 I measured with a voltmeter 12V on 2 wires( so I wired the red at V++ and black to the ground). When the car is running it runs 12.5V on the wires but I don't think that this change of voltage creates this problem. Thanks for your quick answer

Hi would you happen to know the reason why my led strip is not in sync with my signal light when my headlights are on? Tapped the signal lights for power source. Thanks.

@bigbanka5572

3 жыл бұрын

Is it a delay when you cut them on because that’s normal

@gilbertgonsalves5823

3 жыл бұрын

@@bigbanka5572 yes there's a delay with the led turn signal. But when headlights are turned off they're in sync. Okay so that's normal?

@gilbertgonsalves5823

3 жыл бұрын

@@bigbanka5572 thanks so much

@bigbanka5572

3 жыл бұрын

If you can email me a video of it Adrendixon327@gmail.com Or on Instagram BIGBANK__A

@dec8706

3 жыл бұрын

i have the same problem when the drl is turned on and i tried to use signal lights its not sync but when i use hazard lights its on sync

Can you do this on RAV4 2018 I’ve seen that white strip on some people cars makes that rav looks hella nice

@bigbanka5572

4 жыл бұрын

Deiby Esteban yes you can for sure same process most likely

@sunnys7516

3 жыл бұрын

I have it installed on my 2015 Rav4

I Connect it correctly. Yellow to left signal,red to acc, black to negative. But the turn signal left & right didn’t work. Can you please tell me why?

@bigbanka5572

3 жыл бұрын

What car?

What is the connections for the passenger side?

@bigbanka5572

4 жыл бұрын

I have that in the description but I’ve encountered rav4s with different wire colors

We’re these cut to size?

Is it legal to install the drl strip indicator on top overlaping the headlight? Or does it have to be around

@bigbanka5572

Жыл бұрын

I mean in my opinion you should be fine

The only reason why some people have to tap in the fuse box is because some cars don't come with DRL already, so, you would have to use an ACC connection from the fuse box like the radio to be able to install DRLs

@NoizyBearBearOfficial

2 жыл бұрын

What does ACC mean? I bought some DRL’s and it has a control box with it but in the instructions it says to wire the black and red wire to the battery and the white wire to the ACC. What do they mean by ACC?

@Rhino8872

2 жыл бұрын

@@NoizyBearBearOfficialACC stands for accessory, do like your cig port

Finally. One in English

@bigbanka5572

3 жыл бұрын

Haha enjoy Subscribe!!

What about while driving? What color is it ?

@bigbanka5572

3 жыл бұрын

White LED

How are they 1year thinking about getting some for Mitsubishi 08

@bigbanka5572

2 жыл бұрын

Still work great!

You just put all the taps on the turning light and it works when you turn on your headlight do it go white?

@bigbanka5572

3 жыл бұрын

Yes it goes white Only orange when signals

@sbjamal1624

3 жыл бұрын

@@bigbanka5572 thank you very much

@bigbanka5572

3 жыл бұрын

@@sbjamal1624 NO PROBLEM! Give me a sub!!

when talking about cars, it's less confusing to call the sides of a car by what type of Passenger would be on that side. so you have the Driver's side and the passenger's side.

Hi. when the dimention light or low beam is on, the running turn signal does not work. what to do?

@bigbanka5572

Жыл бұрын

What car?

@MrJelini

Жыл бұрын

@@bigbanka5572 VW passat b5.5

Thanks I would install this on my Mahindra Scorpio

@sandyavail

3 жыл бұрын

did you? get me a link to buy this plz

Nicely done. I thought people usually hide that inside the headlight

@jamesolelo4406

2 жыл бұрын

It's difficult to open and seal a headlight and this installs like interior trum.lights so may as well

@cavalierliberty6838

Жыл бұрын

​@@jamesolelo4406 you just bake the headlight...

@jamesolelo4406

Жыл бұрын

@@cavalierliberty6838 I don't have an extra oven to use one time since once you do this, it's unsafe for food

Where do you buy them, can you send me the link please

@bigbanka5572

4 жыл бұрын

Cuvito Transportation the link is in the description

Can you provide a link to the company or amazon link where you bought your strip from? thanks. Good video btw!

@bigbanka5572

2 жыл бұрын

It’s in the description!

Sir, bakit yung sa akin gumagana nmn yung drl pero yung running signal niya ayaw. Ginawa ko rin naka-tap sa positive ng signal yung kulay yellow wire.

Car Led Strip Trunk Tail Brake Turn Signal Lights Flow Type Ice Blue Red Yellow White, Cool Car decoration Tailgate accessories (60 inch)

Meri led car light me 7 wire h Please mujhe usko on Krna btao bhai

What gauge is the wire for the t-taps?

@bigbanka5572

3 жыл бұрын

22-18 The red ones

@josepantoja4397

3 жыл бұрын

Thanks!

Having the lights on the outside is pretty dumb. How do you put them inside of your headlight?

@bigbanka5572

5 ай бұрын

You’d have to open up the headlight and seal them back I thought about doing a video on that

@parkersmusicselections8373

5 ай бұрын

@@bigbanka5572 see I feel like I’d break it…. Or seal it back on incorrectly and have water leak thru

sick 😎

What are those three red things that are connecting the wires?

@bigbanka5572

3 жыл бұрын

Wiretaps

@Sherko.h

3 жыл бұрын

@@bigbanka5572 Can I just tape the led wires to the headlights wires without the wiretaps?

@bigbanka5572

3 жыл бұрын

@@Sherko.h I don’t recommend that here follow me on Instagram Bigbank__a well talk more

Hi, I have Toyota RAV4 2020 Europea versión. The cables of my direction bulb are diferents. Can I send you a photo for help me? Thanks por all and sorry for my english

@bigbanka5572

3 жыл бұрын

Sure thing Send a photo Subscribe please!!

@sergiorodenasregueira385

3 жыл бұрын

@@bigbanka5572 How can I send the photo?

@bigbanka5572

3 жыл бұрын

@@sergiorodenasregueira385 do you have Instagram?

@sergiorodenasregueira385

3 жыл бұрын

@@bigbanka5572 Yes! I have. Whats your name in Instagram? Thanks a lot!

@bigbanka5572

3 жыл бұрын

@@sergiorodenasregueira385 bigbank__a

My lights just stay yellow! Help!

@bigbanka5572

3 жыл бұрын

Adrian Moreno try switching around your wire tap plugs

Did you have to add a load resistor ?

@bigbanka5572

3 жыл бұрын

No not at all

@bigbanka5572

3 жыл бұрын

I would’ve mentioned that LOL

The bs sticky tape that comes on it sucks bad. I know I can't be the only one that dealt with this. So what is the best solution?

@bigbanka5572

2 жыл бұрын

Mine are still on actually with the one it came with but you can order 3M double sided sticky tape for LEDs

@brooklyn_autumn

2 жыл бұрын

@@bigbanka5572 the 3m tape i found in stores was that grey crap. I need that 3m tape they use for decals etc because that stuff is 100x better and cements on. I have the strip lights and one side came where the middle section of the turn signal don't work (can't bend and twist like they say). Amazon let me keep them and gave a full refund last night and I'm about to order a new set but this time im going with LEADTOPS brand because they have the highest star rating everywhere out there. Plus I didn't realize that the edge with the scissor marks (labels) are supposed to be hidden.

@bigbanka5572

2 жыл бұрын

@@brooklyn_autumn yeah exactly let me know once you get them on. Which car are you putting them on?

@gavinedmonson2600

2 жыл бұрын

So you didn’t even need the box with the red and black wires

Where did you purchase those lights? What type are they

@freddybautista6412

Жыл бұрын

Aliexpress

You didn't put in the description for the T- Taps you used

@bigbanka5572

3 жыл бұрын

I’ll edit that for you Emma one second

@bigbanka5572

3 жыл бұрын

TICONN 240PCS T-Tap Wire Connectors, Self-Stripping Quick Splice Electrical Wire Terminals, Insulated Male Quick Disconnect Spade Terminals Assortment Kit with Storage Case (240) www.amazon.com/dp/B07MLPBPW5/ref=cm_sw_r_cp_api_glt_fabc_ZQVPQGJ8ZK44W03GF9FY?_encoding=UTF8&psc=1

@bigbanka5572

3 жыл бұрын

Thank you for the heads up !

@bigbanka5572

3 жыл бұрын

If you don’t mind what car are you putting them on?

@Emma_madison

3 жыл бұрын

@@bigbanka5572 Thanks