2018 RMZ450 Graphics timelapse
New bike, need new stickers! Ive put about 20 decal sets on bikes before in the past, but this is the first time ive ever filmed it. This is a 2018 suzuki rmz 450. They did some big changes to this bike for this year. Excited to get it lookin trick...then ill let her rip! All i used for install was water in a spray bottle, a squeegee, heat gun and about 2 hours to complete it.
Пікірлер: 100
This video is so informative without saying a single word. Great video work as well!
Outstanding job my guy, bike is immaculate
That was a lot of fun to watch Purkz!
Looks so good, great design! All these people talking about your fork leg stickers, meanwhile they have fork guard and fender decals that say Bridgestone/ Dunlop and they run other tire brands.
Breathtaking.
Beautiful Suzuki... looks awesome well done 👍
Beautiful bike
Thanks for the vid. Looks Good! I just picked up a 2018 RM-Z450 and ordered graphics. Can't wait to make this beautiful bike even better looking!
@cocksicklestick
6 жыл бұрын
Aaron Sunday sweetdeal man! Good choice!
@Nyati_Jumapili
6 жыл бұрын
I hope so! I got it while waiting for my knee to heal up. Couple more weeks and I will actually be able to ride it more than just around my block. haha
Awesome bike
Looks sick!
Looks damn nice good looking bikes all right. Now show us some vids ripping dirt
That is one beautiful garage. All you need is a jet ski and a helicopter.lol
Good job you made it look easy!
@thannzawoo3185
5 жыл бұрын
Good Riding
I've had Decal lab graphics also...nice look for mxgp....nice bike.
Bro this is sorcery. You put all these on in one slap. Not once did you pull it off and realign. I was believing this until you did the right number plate over the pipe. That sticker has almost made me want to sale the bike lol. You have to be a Warlock with this dark magic. Or maybe you do this for a living idk... I'm going with magic 😂😊😊😂😂
@cocksicklestick
5 жыл бұрын
Haha best comment ever! I pre fit everything 1st n then try to remember that exact location when it's time to stick. Thanks!
Nice. I have a built 05 450rmz. Bananas
_suzuki rmz450_ 👍👍
Clean bike
@cocksicklestick
6 жыл бұрын
Honda rider thanks!!!
I just bought The 2018 kx450f. I was thinking about put graphics on it
Nice work bro by chance would you mind saying who did the graphics as far as company? She looks sweet like to get mine like her somewhat
@cocksicklestick
6 жыл бұрын
Michael Houston thanks! I went on eBay, typed in 2018 rmz450 graphics found a company called decallaboratory. Good people here's a link www.ebay.com/itm/SUZUKI-RMZ-450-2018-MX-Graphics-Decals-Stickers-Decallab-world-MXGP-NEW-Best/282671553204?hash=item41d0899ab4:m:m8R2rgWMYJPFwTZxK0Da4yQ
Nice motor
Zuzuki lo mejor de lo mejor
MANTAP MAS
nice
Why did you use water for installing the graphics, does it help the graphics stick to the plastic better or is it for an easier instillation?
@cocksicklestick
6 жыл бұрын
Cristian Lemos allows the decal to move around a little bit before it's stuck for good
Hey, man...what kind of liquid did you use to stick the graphics?
@josephwinkler4863
4 жыл бұрын
In the description it says water in a spray bottle
@josephwinkler4863
4 жыл бұрын
It doesn’t seem like that would work seems it would screw up the adhesions
@silkcustoms520
3 жыл бұрын
Joe Winkler is right. If he is using water, he definitely has some dish soap mixed with it.
its time to change the seat bro, u need Thrill seekers collection maybe..
How does that Yoshimura pipe so they have the exact bike new pipe coming
Hello sir i've a question. The RMZ 450 2006. Can i customize the plastic to 2018?
Nice! Now some supermoto rims and it's perfect :D
What kit did you buy
What kit is that? Whats the link
very nice, great job, but the forks, take those off order some showa.
are u satisfied with suzuki riding (clutch brakes.... ) and overall quality of the bike .Im planning to get one 250 for me
@cocksicklestick
5 жыл бұрын
This is actually my 1st Suzuki 4 stroke...I haven't even rode it yet. I'm going to do a video of the finished bike, will be riding it at the end of this month. I'll let u know
@grunx_1202
5 жыл бұрын
Exploring with Purkz thank you will be waiting for ur answer
@quaussiemoto3939
5 жыл бұрын
@@grunx_1202 Suzuki and Kawasaki make the best quality bikes Yamaha are great as well but they are just to different and a pain to work on. I have a 2013 RMZ 250 brakes have always been rock solid, I have had my clutch basket replaced though. With any 4-stroke just need to make sure your valves are not worn and your timing chain is not loose and don't let any dirt into your engine and change oil every 5 hours and you will never have any engine issues with a Suzuki they run for ever if maintained.
@grunx_1202
5 жыл бұрын
@@quaussiemoto3939 damn man changing oil every 5th hour is kinda expensive for me .I got used suzuki 250 4 stroker as my first bike im still learning and upgrading my skills
@quaussiemoto3939
5 жыл бұрын
@@grunx_1202 It may seem extreme but you have to realise that a 4-stroke motocross engine is built for racing so the engine tolerances are really fine that means the engine will wear very fast.They usually need a new piston at 50hrs so when you factor all that in it's not extreme at all it is completely normal. If you are not doing it every 5 hours than you are maintaining your bike poorly!
Stupenda
Hey bro called them got me a set what solutions are you using and how have they held up any peeling back or anything any tips or tricks if you did another set. Thanks for all the help bro she is sweet
@cocksicklestick
6 жыл бұрын
Michael Houston I just use tap water, don't use a soapy water. I would get a heat gun also. About $15 to $20. Clean surface, test fit your pieces first, peel n spray both the decal and pastics, squeegee hard from the center out with a paper towel under the squeegee to soak up the water. Heat gun the edges. The next day there might be some spots that pop up, heat gun them and hit it with a squeegee. I would try to do in a room that's 60 degrees or warmer. Good luck. If you stick it and realize it's not lined up u can pull it back off but keep it sprayed with water.
@mikejuce
6 жыл бұрын
Exploring with Purkz sweet are they holding up ok so far any peeling off or they seem pretty good set of graphics
@cocksicklestick
6 жыл бұрын
Michael Houston yea they are holding up nice, that! If you pressure wash your bike try to avoid spraying at the edges sometimes the high pressure can lift up the graphics. I have this trouble on usually just louver graphics because the angle they are.
@mikejuce
6 жыл бұрын
Exploring with Purkz sweet thanks bro I appreciate all the advise
@Puckgrinder85
6 жыл бұрын
Wipe plastics really good with alcohol before hand. I had a new bike and luckily installed fender graphics and was done for the night and kept having issues with lifting until i used alcohol on it and no more problems.
Where did you order your stickers from
@jomararquero4447
5 жыл бұрын
sticker of crf 250l
Hello what do u spray on yours
@cocksicklestick
6 жыл бұрын
Sxf Wilson water only
Suzuki por siempre amarillo
what chemical it that you spray broo?
@cocksicklestick
6 жыл бұрын
Julius Laurella just water straight from the sink
Can u tell me where did u buy your graphics kit at
@cocksicklestick
Жыл бұрын
Ebay
Man , You put KYB stickers on the forklegs ... You have SHOWA forks man..
@cocksicklestick
6 жыл бұрын
Christer Stefansson haha I know! Kyb came with the kit showa tired of making decals I guess
@jakewaggoner4196
6 жыл бұрын
lol. .
@williamgoske1178
5 жыл бұрын
Euro rmz teams use kyb. Probably why kyb was in the sticker kit.
What’s the application fluid your using?
@cocksicklestick
6 жыл бұрын
Tyler Pearl just water
@T.P.710
6 жыл бұрын
Exploring with Purkz I’m surprised that works so well.
Hey, nice vid and awesome looking bike thou. But next time please do NOT use soap water for application! Our material production do not recorded to do so... ;) Thanks!
@cocksicklestick
6 жыл бұрын
Martins Klavins if you read the video description I explain how I only use water...heat gun, squeegee, and a spray bottle. Thank you though
@pmsbassplayer
6 жыл бұрын
Exploring with Purkz Excellent installation! I used to work for a sign company installing vinyl graphics.
@cocksicklestick
6 жыл бұрын
HiViz Steph thanks!
@cencoast_7.340
6 жыл бұрын
Martins Klavins Tough to understand your grammar
How's Cali purks?
@cocksicklestick
6 жыл бұрын
rich Mac it's awesome man!
Whats the name of the song at 6:17?
@jonah916
6 жыл бұрын
durude- sandstorm
Suzuki ok jooos
Beautiful Hello
So how much faster are you now?
@cocksicklestick
6 жыл бұрын
F A slower, I don't wanna crash n scuff them up
@ferdinandpaul8306
6 жыл бұрын
I don't understand why people are making jokes about optic tuning. What you do is you spend 50-150$ on a 10.000$ bike and make it look a 100 times better, that's it!
quanto custa uma moto desa
That company has been closed down... Breach of trademarks infringement laws. You can't just open a graphics shop and use any logo you feel like. Alot of these cowboy graphics shops getting hit now.
Well your bike looks good but can you ride it?lol
ভাই আমার খুব পছন্দ হয়ছে আমি নিতে চাচ্ছি আমার বয়েস এগারো বছর এই তাকি হবে তাহলে নিতাব আর এইতার দাম কত পরের হাজার না কত আমাকে বলবেন ওকে
@MDNoman-zi8fl
5 жыл бұрын
ভাই আমার বাসা তিলকপুরে
mmmm mean
I hate the blue seat
Looks ugly without graphics
still frame looks shit