No video

2018 Ram 1500 Borla Pro XS Muffler swap

19” case Borla pro XS muffler with single 3” inlet and dual 2.25” outlet. Full 304SS extension pipe and SS clamps. Stock 2.25” tailpipes with carven 5” SS tips with a 5.7 Hemi cold start.

Пікірлер: 11

  • @kipharris5599
    @kipharris55994 жыл бұрын

    Are you still liking it 6 months later? is the resonance between 1500-2000 on like 20-25% throttle driving you crazy yet?

  • @jonathanstansfield735

    @jonathanstansfield735

    4 жыл бұрын

    Yes I still like it. I ended up adding a 3” straight through resonator from ZZPerformance and it helped big time and has tamed the cold start “growl” when I start the truck at 5-6am. It has reduced sound output as well but it still sounds good. You can also use the vibrant 3” resonator that’s popular. I went with the ZZP bc it’s designed for high resonance that you get in the turbo cobalt SS world when they do exhaust deletes. It’s a straight through resonator with an empty chamber in the middle vs a straight all the way through resonator.

  • @kipeharris

    @kipeharris

    4 жыл бұрын

    Jonathan Stansfield Did you just install it before the muffler? I am assuming it dramatically helped with the interior drone?

  • @punkbutler88
    @punkbutler884 жыл бұрын

    I love Borla Pro XS mufflers. How are you liking it? Does it drone when cylinder deactivation kicks in?

  • @jonathanstansfield735

    @jonathanstansfield735

    4 жыл бұрын

    I’m liking it. No drone but I do get alittle resonance between 1500-2000 on like 20-25% throttle but it’s def not drone like I had on a 18” Maggie clone I had on my last truck that I removed after 1 month. It’s louder than I thought tho but I like it. Might have to add some sound deadening inside my crew cab or figure out another way.

  • @jonathanstansfield735

    @jonathanstansfield735

    4 жыл бұрын

    I also don’t drive in MDS mode. Always in manual 8. When it goes into MDS I’f I forget you can hear it but I wouldn’t say it’s bad.

  • @njkomp
    @njkomp4 жыл бұрын

    What kind of tips?

  • @jonathanstansfield735

    @jonathanstansfield735

    4 жыл бұрын

    Carven 5” slant cut 304SS polished

  • @sidneyaluvi
    @sidneyaluvi10 ай бұрын

    Does it Drone?

  • @jonathanstansfield735

    @jonathanstansfield735

    10 ай бұрын

    It did alittle around 1700rpm, I added a ZZDP Drone muffler before and it killed all the drone mostly. I don't run it anymore and I moved onto a JBA catback which sounds really good.