RC - Красавчик !!!!!

@pmutah

6 жыл бұрын

+Alexx BRP thanks buddy👍

A little trick I use is spray silicone it helps coat the plastic so you never get fading. Works really good try is love it

@pmutah

5 жыл бұрын

Hey thanks for the tip I appreciate it. another viewer also gave me this same tip I got some Maxum silicone spray and I love it. thanks again😎👍

@RayBlack321

3 жыл бұрын

Does it help keep the dirt from sticking as well I assume?

I think it a must if someone owns a SXS and buying a Pressure Washer . like you said it will cost a lot washing at a car washer a Lot of quarters ..

so will you mess up your can am by watering the engine? and all the parts?

Instead of CR spotless I get my media from bulk reef supply and built my own spot free rinse rig found it to be cheaper at the time I bought it. The same stuff used in aquarium filtration for DI water is used in the CR spotless.

@pmutah

6 жыл бұрын

+Brandan Francis thanks for the info I really appreciate it I like the CR spotless but it doesn't seem like it last that long and they charge a lot for their media so this is great help. thanks again👍

Excellent Brandon. I appreciate all of your video's.

@pmutah

6 жыл бұрын

Thanks man I really appreciate all my subscribers it's been fun sharing with everybody😎👍

what should i avoid spraying direct inside

Brandon just watching your video little bit confused. BRP manual in about 10 different pages says specifically NOT to use a power sprayer whatsoever. I was surprised how many times it was mention in the Can Am Maverick owners manual, your thoughts............

@pmutah

4 жыл бұрын

Mark I don't know why BRP would say that it's probably because of liability I've used a pressure washer on my side by sides for the last 10 years and I have never had a problem😎👍

Dude I got it...it is here and it’s mine

You count that as muddy?

I just put dawn inside my hose with a nozzle sprayed 😎🤜💥

Just found your channel. Great video, trying to decide if I should get a rock crawler like yours or the other cam am below the one you got. Do you like just going trail riding with the rock crawler. I’m going to do mostly trail riding with my grandson. What do u think?

@pmutah

5 жыл бұрын

Peter if you want to go a little bit cheaper they have that Maverick sport xrc that's pretty cool😎👍

Hey Brandon, just wondering what is the top speed your seeing on your XRC. I just got the RC Turbo and not sure if I want to upgrade my UTV to 172 vs the 120hp.

@pmutah

6 жыл бұрын

Jarid King the government about 85 miles an hour. you can ship them and do a couple things and get him to go a little faster than that.👍😎

@jaridking5948

6 жыл бұрын

Cool deal, This weekend is my first weekend with it. I might reach back out to learn some tricks. Best

@pmutah

6 жыл бұрын

Jarid King sounds good man have fun. side by sides are blast👍

Would u recommend degreaser ? On the engine or just spray down with the pressure washer ?

@pmutah

3 жыл бұрын

For sure I used to grease her all the time 😎👍

Hey Brandon , I see the smaller power washer is 2000 psi. Is that the pressure you actually wash with ? Or , do you turn it down ? Wanna make sure I'm not gonna ruin my decals or anything. Thanks.

@pmutah

6 жыл бұрын

Hank Slaght yes Hank I wash with the 2,000 psi pressure washer all the time. I've never felt like I was doing any harm to my vehicle. I feel like it cleans great and is never going to damage anything.👍

@FloridaKeysPirate

6 жыл бұрын

Brandon Pierce , excellent , thanks !

The pressure washer you have by the black man door how do you get the soap to dispense I have the exact same one except I only have one knob and that's to turn the washer on? The Last seven times I tried to wash my dirtbike I couldn't get the soap to dispense?

@pmutah

6 жыл бұрын

+Mason cu thanks for the comment. to be honest I have never used the soap function on the pressure washer I like to use a wash bucket in a mitt. thanks for watching the video.👍

@steeleexpressllc990

6 жыл бұрын

Should be able to attach a downstream injector downstream of the pump. Check with the manufacturer .

Brandon , aren't you worried about blasting water in past your shock seals ? Or , are you just careful not really spray that area ? I was also wondering about the windshield fitting. Did you need to mod it ? Thanks.

@pmutah

6 жыл бұрын

+Hank Slaght thank you don't have to worry about the shock seals you're not going to get any water in there. the reason why shock seals go out and oil starts leaking is because they're dirty and they scratch the Piston when they move up and down the best thing you can do is spray every bit of dirt off that shock. thanks for watching the video👍

@pmutah

6 жыл бұрын

Hank Slaght Hank the easiest thing to do with the windshield is to clip it in the bottom and just zip tied around the bar at the top it works great you don't have to cut it that's what I did

@FloridaKeysPirate

6 жыл бұрын

Brandon Pierce great , thanks !

Help! My plastics are dulling on me and I cannot bring the shine back on the doors

was reading my can am owners manual and in big bold letters it says never use a pressure washer, now i just bought my new can am but my old arctic cat i always used a pressure washer and never had any problem because with the clay we have here in Canada there is no way your getting it off with a garden hose and that's what can am says your supposed to use! any thoughts?

@pmutah

6 жыл бұрын

Darryl Wheeler that is weird I have always use the pressure washer and I have never had a problem. I don't know how you would wash your machine without one

@darrelwheeler6204

6 жыл бұрын

agreed ! I guess you shouldn't get up really close to electrical stuff and maybe suspension seals I guess but i'm still going to use one.

@pmutah

6 жыл бұрын

+Darryl Wheeler that's really weird. I don't know what the difference is between driving through snow, mud, Rivers, dirt and using a pressure washer doesn't make any sense.

Brandon- I need a way to PM you... have a question. I ordered a Can Am half windshield. I see you have one. So does the stock OEM fit with the intrusion bars on our X RC's? Or did you have to modify to fit?what is the best way to reach you??

@pmutah

6 жыл бұрын

+jksqeakytoy you can message me through Instagram. My name is pmutah

@jksqeakytoy

6 жыл бұрын

Done - Thanks!

@pmutah

6 жыл бұрын

+jksqeakytoy you can also email me if you don't have an Instagram account at pmutah@gmail.com

I’m the same way. Buy something, show pride and take care of it!! P.S. SUB:)

@pmutah

6 жыл бұрын

+Moto-B heck yeah if I'm going to spend that much money I want to know that's running right and ready to go. I'm glad you enjoyed the video and I really appreciate that you subscribed. see you on the next one.👍

Next time take out the bottom seat cushions, I washed mine with them in and they got waterlogged, they probably weighed 10 lbs, lol, they take a long time to dry out and you might get a soggy ass next time you drive it

I USE A GAS LEAF BLOWER TO DRY MY CARS AND MOTORCYCLES.

@pmutah

6 жыл бұрын

+dawayn ruff I have tried the leaf blowers too they do work pretty good. but I like the Master Blaster better it's heated filtered air and just easier to use with a longer hose👍

Nice...Same Toy...

@pmutah

6 жыл бұрын

Thanks Ron I appreciate it👍

where is the mud?

@pmutah

6 жыл бұрын

x275 racer I always pre wash the mud off before I get to my shop

Brandon, I'm going to have to stop watching your channel. I got a Spark a few weeks ago, and now I need to buy a MasterBlaster. Its getting too expensive. Not sure if you have tried it yet or not, but Maxima SC1 works great on the Black plastic.

@pmutah

6 жыл бұрын

James Paolicelli I did not know about the maxima SC1 I'm going to grab a can of it thanks. sorry that I'm making you spend so much money lol I will say though I do love the Master Blaster especially for cleaning the side-by-side it makes short work of drying off everything and blowing water to clean out every crevice. thanks for all the support James really appreciate it.👍

@maverickx3838

3 жыл бұрын

That maxima is an awsome product

2 words buddy foam cannon

@pmutah

6 жыл бұрын

+Dustin Pettit for sure a foam Cannon would be cool too

Lol you guys and your west coast “dirty” rigs. On the east coast that is the cleanest rig around.

It's called global warming