This was excellent!!! Thank you for posting! I have a 2012 Yamaha VMAX 175 HPDI that this will work on. I figured I could possibly do it without having to remove the entire unit and your video makes me have complete confidence to now do it. I loved the detail of every step. Well done, sir! Thanks again!

@us4marine

25 күн бұрын

Thank you Jhicks for your encouraging comment, it really helps. Glad you could get something out of the video. Thank you for watching . Take care.👍🏻👍🏻

Hi - You have a talent for demonstrating and teaching - great work! Thanks and I’m now a new subscriber. I have a 2022 Yamaha f200 four cylinder and the trim has never held the motor up for long. It used to take a day or two for it to drop. Now it drops from half way up to down in half an hour. I took it back to the dealer a few times for the issue to be fixed, and they would tell me it’s fixed, but it never was. Would you have any idea if this is a common thing with new Yamaha outboards, and (if so) which parts do I need to replace? I’m comfortable doing the work myself as it seems the only way to get it done competently. Thanks again for your great style.

Thanks for the video!! I watched 2 other youtubers disassemble tons of parts for no reason.

@us4marine

7 ай бұрын

Thanks Trent, appreciate you watching and glad it helped you. Take care stay tuned.

Good to see you again, another great video as usual!

@us4marine

10 ай бұрын

Thank you Ezra, I was somewhat busy with personal things. Thank you for watching, it’s important to the channel.👍🏻

This worked perfectly. Great Job - Thank you

@us4marine

7 ай бұрын

Thank you, I’m very glad it helped you on your repair. Take care. 👍🏻

Saludos Pete desde 🇵🇷sigue adelante q tu conocimiento nos ayudas mucho con nuestras máquinas y no te olvides de ves en cuando en Spanish y en inglés para tu amigos

@us4marine

10 ай бұрын

Hola estimado Rene, si estuve un poco ocupado con el matrimonio de mi hija menor. Gracias por siempre estar pendiente, recibe un gran abrazo.

Great instructions. Thanks!

@us4marine

3 ай бұрын

Thank you for watching and participating. Take care. 👍🏻

Excellent video

@us4marine

9 ай бұрын

Thank you very much!. Really appreciate the good comment. Take care.👍🏻

Thank you so much Sir .l’m very interested.

Saludos pete gracias por compartir tus conocimientos ayudan mucho

@us4marine

10 ай бұрын

Amigo Yanisvel, com siempre gracias por estar allí, un gran saludo.👍🏻

Good video, explained very well. I have the same unit on my f115. It stopped working, I found a nick in the wire at top of transom height. Water had gotten down the wire and corroded the brush connection (circuit breaker one), yes there is a circuit breaker there. Unfortunately 3 of the bolts snapped trying to undo, so I can verify they are dry, and stainless and alloy don't go well. Currently spraying and let it sit for a while (unit is out), any recommendations with type of spray to seep in and loosen, fortunately the head snapped off and I still have some thread to grip?

Thank you

@us4marine

9 ай бұрын

You're welcome. Thank you for watching.

Great video! Can you use the same method in a 1998 200hp 2 stroke?? Thanks!

Just followed the entire video, wired the green and blue onto outboard. Went to use trim switch and the ram i lowered with a RAG isn't going up or down. I hear the new trim motor working, but it's not moving the ram arm. Any idea?

@us4marine

3 ай бұрын

Make sure the weight of the motor is on the ram, you have enough fluid in reservoir and manual release valve is close. Thank you for watching. 👍🏻

Hi sir im new subs here. I change trim motor. But now the motor is working. But no up and down. Pls help whats wrong. Thank you

@paulypaulypauly8011

5 күн бұрын

Hi. Did you ensure you filled the fluid and bled by raising and dropping fully a few times?

What is the model number of the trim motor

@richardpickersgill3434

21 күн бұрын

Yamaha have an exploded view of the parts with the OEM part numbers

Doing mine today, 3 of 4 trim motor bolts snapped, now what?

@us4marine

2 ай бұрын

OMG time to start drilling and get some metric helicoils. 😩, remember to put a rag or masking tape on the pump opening to avoid metal shavings falling in. Thank you for watching. Good luck

@parton45852

2 ай бұрын

@@us4marine I just drilled strait through and, through bolted them, works great now and should make it a little easier next time around.

@richardpickersgill3434

21 күн бұрын

Same here mate, the 3 that are exposed on the ends. I'm trying to soak a bit with CRC spray. while the new motor turns up. I think I'll have to drill them out too.

@richardpickersgill3434

21 күн бұрын

@@parton45852 Did you manage to save the thread or did you use smaller bolts and nuts?

@parton45852

21 күн бұрын

@@richardpickersgill3434 no I did not save the threads, just drilled straight through and used smaller bolts and nuts with lock washers.