No video

2016 Doc Harley: COMPENSATOR

Introducing Doc Harley from the Service Clinic at Low Country Harley-Davidson to help you with the health of your motorcycle! Here he talks about the importance of the compensator in your motor! Let us know what other questions you have for the Doc!

Пікірлер: 324

  • @genegeneish
    @genegeneish Жыл бұрын

    I have an 06 dyna, and yes the alternator sheared the screws. The bike was in for warranty work at Chesapeake harley, the entire primary was apart, and they DID NOT replace the problem alternator when they could have, and this problem was known in 2015. I replaced the entire charging system myself. I like the bikes, but some of the dealers suck.

  • @mikeb46
    @mikeb463 жыл бұрын

    Great video Doc, you make everything clear and do a good job on the video part. I feel I have a charmed Harley experience. My 2000 wide glide has had NO major problems in 21 years and 88,000 miles of usage. I don't beat it, it rarely has been revved higher than 3,500 rpm. I don't need to rev it high, it pulls like a torque monster from 1,500. I had the shop install a screaming eagle air filter and ignition module before I picked it up. And the mechanic swapped jetting in the carb, so it pulls really strong, and I change the Amsoil every 5,000 miles. I started seeing horror stories about my engine on YT and had to do some digging. The compensator for 2000 must have been made of titanium because mine is still smooth and quiet. The cam followers still have half the material left on them. The local shop that trued the new spokes for me showed me my wheels have the extra wide bearings. When people talk about poor Harley quality I have to shake my head in disbelief. Maybe I just got lucky but NOTHING expensive on my bike has had problems. I replaced the spokes because several had seized and could no longer be tightened. That's it, that's all that has been done except for tires and brake pads but those are normal wear items. Years ago I swapped the factory pipes for vance and hines longshots. When installing them I noticed there was no cross over tube. I immediately noticed a loss of low end power. That was a major disappointment to me. So even though the long shots had no baffles and should have less resistance to exhaust flow, they did not provide the same low rpm power I was used to. I went back to the factory pipes and it was much better. So, that cross over pipe really does add to the low rpm power. Drag pipes are strictly for high rpm riding.

  • @americanveteranaceshigh9051

    @americanveteranaceshigh9051

    5 ай бұрын

    okay, do you drive your prius the same way. lol

  • @toddoverby5538
    @toddoverby5538 Жыл бұрын

    Doc , Not sure why you skipped over the pre 2006 model twin cam compensators. They did not have the integrated spring pack. I have a 120 HP 124 TQ 2001 fatboy. Everyone in the industry I talked to (Baker included) told me that the stock compensator would definitely hold but anything after the revision in 06 would need replaced. So it sounds to me like it wasn't a problem until they changed it in 2006. I am fairly rough on it and it has held for 22k on the original motor and 7k on the 107 build. Knock on wood. Now the M8 comp ramps were changed as well and are breaking. When you find something that works well, stick with it. Or improve it and test it to make sure you improved it. But don't go backwards. Please. Thanks for the videos Doc. Little O

  • @josephcivita1450
    @josephcivita14505 жыл бұрын

    BDL belt drive and dry clutch. Get the one that fits inside the stock primary. No more knock at start up and you'll never have a compensator problem ever again. Cost less than 2 compensators.

  • @johnnyjellybeanQC
    @johnnyjellybeanQC5 жыл бұрын

    My compensator will last a LONG time since it's sitting in a box on a shelf after I chucked it for an Evolution industries 30T engine sprocket on my 106" Dyna. That 30T sprocket is the best mod I ever made.

  • @jw3028

    @jw3028

    4 жыл бұрын

    is your sprocket a direct drive? I took my compensator off and Im just using a direct drive gear. no compensating.

  • @lewishill405
    @lewishill4053 жыл бұрын

    I put a man-o-war compensator and a hayen M6 BT07 primary chain tansioner in my 2012 (103) road king classic and it is doing great.

  • @dougfresh1341

    @dougfresh1341

    3 жыл бұрын

    Yep! ManOWar is only way to go IMHO. Kevin Baxter has a great video on Compensators and the ManOWar.

  • @bullast2046

    @bullast2046

    2 жыл бұрын

    @@dougfresh1341 yea man! I’ve been watching that video over and over again cause that’s getting added to my bike

  • @chrish5791

    @chrish5791

    2 жыл бұрын

    I’m a newbie to Harley ownership (2006 Dyna Wide Glide purchased last December) and have been learning a lot on KZread videos about Harley’s engineering screwups. After learning about these compensator issues, as someone with engineering and materials science degrees, I definitely agree with you assessment of the Darkhorse Man-O-War compensator. It will be one of my first upgrades along with a fan assisted oil cooler. I feel a bit sorry for Doc Harley as he’s stuck with Harley parts for his recommendations. I’m sure that if he felt free to recommend aftermarket compensators the Man-O-War, with it rebuildable elastomer design, would be on the top of his list.

  • @TheKerstingm
    @TheKerstingm Жыл бұрын

    I have a 2007 Electra Glide Standard I've been debating what to upgrade my compensator to, original owner installed a SE at 20k miles, I have 45k miles and hearing the rocks in a can rattle when I take off as I'm letting off my clutch. Your video explains the why and what that other's haven't

  • @mrvoyagerm
    @mrvoyagerm2 жыл бұрын

    My 2011 Ultra Classic 96 is box stock and when I asked the dealer which compensator was in my bike they checked the serial number? and found it is the newer heavier duty one. They said as long as I don't upgrade the power, it should be fine for a long time. No issues to date after 30,000 miles.

  • @timhoughland8267
    @timhoughland82675 жыл бұрын

    I've been paying alot of attention about compensators and primary drives for big twins. I had an 02 Dyna FXDX and made it a drag race bike. I used a BDL comp sprocket with 2 teeth shorter. Broke the first one and BDL sent me an updated version. No issues. Product worked great. Sold bike. Fast forward to 2019. I have a 2012 roadking which I race in "Hogs gone wild" series new this year. I race in the "street" class. We have to complete a 20 mile ride before each event. As wear and tear are coming with bikes with milage (mine had 30k when I bought it used) I tore into the primary. I found some massive wear on the 3 arms and 3 ramps..so much so, I didn't even question it. I purchased the SE comp and installed it. You can deff tell the robust and better engineering. But we are about to find out how well it will take 6500 launches and see what's lacking, if any, with this design. After all...the sprocket and clutches are much cheaper to replace than a transmission....

  • @captainnitrousx1331
    @captainnitrousx13314 жыл бұрын

    Made mine direct drive after balancing my crank 2000 miles ago on my 2008 Road King. It runs and accelerates great.

  • @dncnoble272
    @dncnoble2726 жыл бұрын

    Doc Harley, How Goes it Sir, Wanted to Let you Know, Your Videos are the Best Pointed and Clear (How To, How It Works, WHat to expect when Performing Maintenance and through adding a few more "Bald Eagles" under the Jewels. This Compensator video is exactly what I needed to watch, My current Project Has just commenced the past few months, I felt like I had all the Parts Finally Purchased and In Hand for my 2010 FLTRX Custom Rebuild. Stage V, Go Big or GO Home They Say... Except wouldn't you know what I did not pick up,,,,COMPENSATOR!!!! I Have the New Jugs, Pistons, Rods, Lifters, ROcker/rollers, 259 cams, 2 to 1 Borzillo Header through slip On, Ported & Polished Screaming eagle Racing Heads, 38mm Throttle Body, Injectors, Screaming Eagle Plugs, Wires, 38mm Screaming Eagle Breather, 259CAMS ONE MORE TIME, New Stator, Rotor, Cap, And Dyno Jet Power Commander V, (hope it pairs well since SER Programer is not available),,, I had Previously Installed The Stage 1 Kit, and went with the DJ V Fuel Mapping / Programmer. HOWEVER UNTIL I WATCHED THIS VIDEO,,,I WOULD NOT HAVE THOUGHT OR EVEN KNOWN WHAT YOU JUST TAUGHT ME DOC HARLEY,,,THANK YOU,,, CAN You tell me if my Power Commander will work on THe STage V Tire SHREDDER 110 Kit,, Or even better, DO you Happen to Have a Pre Programmed Screaming Eagle Race Tuner I could Pick up,, EVEN BETTER THANKS DOC HARLEY,,,, Im now a Subscriber,,,and when Brothers want to Know,,,Im pulling your videos Up,,,And Buying all the Products advertised across your Channel....lol

  • @garymoore3497
    @garymoore34974 жыл бұрын

    I pulled the primary chain drive out ; and replaced it with a 3 inch belt drive. That was over 10K miles ago, on my 99 twin cam, still works just fine and dandy. Harley will never go with a primary belt drive. They are too robust, and dealers would take a huge hit in "shop income" not fixing primary chain drive problems......

  • @richardfernandez7466
    @richardfernandez74664 жыл бұрын

    Very good. I'm in a Harley rider for the last 40 years got me 2014 Street Glide I like listening to your cam to get to the point and no other BS enjoy watching you keep it up

  • @ericrhinehart6055
    @ericrhinehart60559 ай бұрын

    SInce I own a 01 RK, a 10 Dyna and a 15 Ultra, that answered all of my compensator questions. My 15 Ultra I purchased recently with 7900 miles on the clock. Owner said he had just had it serviced, so I lived with the Harley noises for a few hundred miles. Did a three hole change, putting gear oil in the transmission and primary lube in the primary. Noises went away within 20 miles! When I changed the gear and primary, I would bet those plugs hadn't been removed since the break in serv ice! Trans oil looked good and smelled like 10 yr old third member lubricant!. Primary oil was obviously OLD and Soiled... I'm a 1,000 mile oil and filter changer and 2,000 mile max primary oil changer.

  • @bottmar1
    @bottmar16 жыл бұрын

    I had a Sturgis belt drive (both belts) installed on my 1979 Superglide at 18,000 miles. The compensator started making noise, at idle, 10,000 miles later. I welded the damn thing solid and haven't had any trouble for 73,000 miles. Maybe the belts make up for the power pulses or something but I'm not about to put a new compensator in with no other issues having occurred.

  • @07blackdog

    @07blackdog

    6 жыл бұрын

    bottmar1 That's what was done in the old days. They also make solid sprockets. The compensator is actually meant to protect the 5,and later 3 piece crank shaft. Too many burnouts will shift the flywheels.

  • @thangknowa3288
    @thangknowa32883 ай бұрын

    So true. I am on my 3rd comp in my 103 (In 13 years) and went right down Doc's line there. One other thing: the comp "Kick Back" puts hell on the starter (Think about it), so the Dealer recommended a new starter on the last (Literally, I hope) comp upgrade, and after dissecting the old starter, it was really needed. Something to think about, folks...

  • @marcbee1234
    @marcbee12346 жыл бұрын

    I've owned 3 Harley's, I now ride a 2014 Honda CTX700 100 miles a day, ZERO break downs - 34000 miles - no breakdowns, 60 miles per gallon, love it!

  • @robertduvall5148

    @robertduvall5148

    5 жыл бұрын

    Just wait it will break

  • @stevenhedstrom5586

    @stevenhedstrom5586

    5 жыл бұрын

    Honda's are for fruitie people

  • @dougfresh1341
    @dougfresh13417 жыл бұрын

    I've been a Harley man for long time. However, it is disgusting to see such poor engineering for the money we spend. If I didn't do most of the work myself, I'd have to get another job.

  • @dougfresh1341

    @dougfresh1341

    7 жыл бұрын

    p.s. Doc, you guys do a great job on videos. THANKS.

  • @billbright1755
    @billbright1755 Жыл бұрын

    It’s a matter of evolution. I think he was compensating for something.

  • @mikebingaman7366
    @mikebingaman73662 жыл бұрын

    Doc you sure know what the hell you're talkin about love watching your videos I learned a lot

  • @ronwinter45
    @ronwinter453 жыл бұрын

    Doc you do a fantastic job explaining! I'm always impressed

  • @bobbgorena2656
    @bobbgorena26562 жыл бұрын

    I'm 55 years old and I've been a college professor for about 30 years. Now I want to be a motorcycle mechanic! I guess you're never to old to switch careers...hmmmm...

  • @MrNetnut

    @MrNetnut

    Жыл бұрын

    First U Got To Unbrain Wash Yourself ! Peace/;-))

  • @dimmybond505
    @dimmybond505 Жыл бұрын

    Thank you Doc. Always superb advise and videos.

  • @williamyoung3340
    @williamyoung33402 жыл бұрын

    I like to use the term "drivetrain shock absorber" when describing the compensator to my customers. The pulses from a big v twin are hell on the transmission and clutch. The 07 to 11 ones are the worst.

  • @semtech30
    @semtech302 жыл бұрын

    I put a solid in my 2014 ulta ltd. It shift's so smooth it can't be all that bad. Clutch action is more direct also. No waiting for a compensator to engage.

  • @7316bobe
    @7316bobe4 жыл бұрын

    Well Doc an interesting video. One thing with Harley-Davidson motorcycles you will have a job for life.

  • @tx699
    @tx6998 жыл бұрын

    thanks doc,I have learned something I didn't know, I'm always trying to learn more about my 2015 street glide I now know that my compensator will hold the power of the new cams going in in 2017

  • @normanvitellaro756

    @normanvitellaro756

    8 жыл бұрын

    don't bet on it

  • @coronalandsucks

    @coronalandsucks

    7 жыл бұрын

    It will fail. Once it starts banging on heat soaked starts and lots of driveline slack, it's time!

  • @exupakias
    @exupakias2 жыл бұрын

    Thanks for all these very usefull informations.

  • @ronaldlsmith1551
    @ronaldlsmith15517 ай бұрын

    Thank you Mr doc harley I own a 2016 limited low twin cooled 103 so I guess my bike already has the upgraded compensator

  • @bluesriderDF
    @bluesriderDF4 жыл бұрын

    Great vid! I'm so glad I have a 2014!

  • @herbertgilcher2236

    @herbertgilcher2236

    4 жыл бұрын

    replacing my compensator now 44000 miles 2014 Ultra

  • @quinnjim
    @quinnjim8 жыл бұрын

    The compensator on my 2011 Street Glide 103 motor went bad at 7,000 miles. The guy talked about the little funnel to get more oil to the part. That seemed like a weak band aide to the problem. I wasn't too happy about replacing internals with such low mileage. I wish Harley would invest in getting the plastic parts out of their engines...

  • @coronalandsucks

    @coronalandsucks

    7 жыл бұрын

    Go Baker. They've figured it out!

  • @patforet7336
    @patforet73363 жыл бұрын

    Dark Horse comps. are the way to go for any Harley.

  • @12594

    @12594

    3 жыл бұрын

    Just bought one . pretty solid design. Look forward to putting some miles on it

  • @bmcdonaldmcdonald9081

    @bmcdonaldmcdonald9081

    3 жыл бұрын

    @@12594 Their shipping department leaves a lot to be desired they constantly send the wrong parts.

  • @FrensTimmerpens

    @FrensTimmerpens

    Жыл бұрын

    My 2016 103 EG police has run 63.000km and was worn out. 1 cm play at the 3 points in the compensator!!

  • @robertmorandi3947
    @robertmorandi3947 Жыл бұрын

    I agree Doug. Terrible engineering from this to outrageous tolerances can bearings,etc. Almost seems they are built to fail. My 2009 Superglide just started jumping on hot start. Hope I can install the correct compensator myself!

  • @charleskittler4330
    @charleskittler43307 жыл бұрын

    After the second HD SE compensator failed the Baker compensator is the Way to GO..09 Ultra with a 103 ...

  • @falconator3419

    @falconator3419

    5 жыл бұрын

    Charles Kittler do you mind giving me the specific on that compensator sir? I need one.

  • @hamdog8872
    @hamdog88724 жыл бұрын

    Great content! Super informative

  • @garymoore3497
    @garymoore34973 жыл бұрын

    i had two Harleys, I pulled the compensators out of both of them. They both ran many thousands of miles since

  • @socrateslouca8733

    @socrateslouca8733

    2 жыл бұрын

    Which compensators brands did you use? I heard good staff a out baker

  • @garymoore3497

    @garymoore3497

    2 жыл бұрын

    @@socrateslouca8733 none. no compensator...yes , Baker on both of them , , ,

  • @garymoore3497

    @garymoore3497

    2 жыл бұрын

    @@socrateslouca8733 i don,t run my motor with a compensator. I don't run mt motor with cam tensioners. ... and I re=programmed the BC D.

  • @Info-Med
    @Info-Med2 жыл бұрын

    Great info, thx Doc

  • @Nathan-pw7do
    @Nathan-pw7do7 жыл бұрын

    great video! I love Harley's but it's crap how they screw every last cent out of us

  • @milomanx6531
    @milomanx6531 Жыл бұрын

    I have a 2005 Dyna Wide. Made it a 95" that has 100 HP. With14K miles. About 8 years ago I had a clicking/ rattling compensator. I found a factory bulletin that says to go 1/8 more turn after recommended torque is reached. Harley bulletin # M-1170 I never heard another clicking or rattling noise since. Look it up and give it a try.

  • @craigversetti5700
    @craigversetti57003 жыл бұрын

    As ALWAYS great video and information now tell me can the comp.from the 14 be retro'd to the first year twin cams ??

  • @tomhall4080
    @tomhall40808 жыл бұрын

    My compensator started slipping a lot as I went over 70K. I just had the Scream Eagle kit installed on my 2010 Heritage Softail and what a difference it made.

  • @coronalandsucks

    @coronalandsucks

    7 жыл бұрын

    Tom Hall it'll be destroyed in a few more years. Trust me!

  • @mopar340dave

    @mopar340dave

    6 жыл бұрын

    Slipping? It's not a clutch.

  • @davidfalgout7304
    @davidfalgout73045 жыл бұрын

    I enjoy your videos due to their professional approach and content. I am wondering if the Indian TS 111 has a compensator?

  • @davidsullivan6201
    @davidsullivan62016 жыл бұрын

    DOC: love watchin your videos. You da man!

  • @renatofcr6599
    @renatofcr65996 жыл бұрын

    Very good info, well detailed, thank you.

  • @hemixprs
    @hemixprs8 жыл бұрын

    Wow great video and super informative....looking forward for more videos from you....great job at demystifying the Harley compensator!

  • @dumbcat
    @dumbcat7 жыл бұрын

    you should do a video on the pros and cons of a solid sprocket compensator eliminator. from what i gather it makes the bike quicker but a little jerky at lower revs which is most noticeable when cornering. also, i've heard that if you go with a solid sprocket you need to avoid gunning your bike all the time because that will put too much strain on the press fit crank

  • @stevenminix

    @stevenminix

    6 жыл бұрын

    Hans Zarkov I have a compensator eliminator, I just keep it up in the revs and Ive had no problems. I dont lug my shit and hold it WFO all the time anyway.

  • @jamesrattigan1393
    @jamesrattigan13933 жыл бұрын

    Thanks doc I couldn't find anywhere that explained what the deflector was designed for i just new it was to redirect oil. Can't I I purchase a 2014 primary cover and derby cover and not have to glue plastic inside mine? 2012 heritage softail classic 103 built cholo style

  • @Lowcountryharley

    @Lowcountryharley

    3 жыл бұрын

    James, the deflector kit is a functional, inexpensive upgrade, but you can certainly opt to replace the primary cover with the newer one!

  • @michaelwheatley1813
    @michaelwheatley1813 Жыл бұрын

    how do you stop the se from rattling on a 13 bought bike thought it was bad replaced with new se and its just as noisy as one i replaced

  • @hdrider05
    @hdrider053 жыл бұрын

    Does a 2019 cvo road glide come with a screamin eagle compensator ?

  • @timconnors550
    @timconnors5503 жыл бұрын

    What about a dark horse manowar compensator

  • @MySt0rmy
    @MySt0rmy7 жыл бұрын

    the up date is still a piece of junk check the arms same old arms add a piece of plastic and a Torrrington bearing the only change at 3000 rpm that oil is going to do what ? does not oil get thrown out and the middle piece is still the same , time to stop being cheap and build one that picks up the oil and lubricates this part , after 104 years it time to start building a bike you can put on high mileage its time to stop the icon bull shit and make a bike that lasts

  • @Streamer687

    @Streamer687

    6 жыл бұрын

    Epoxy a piece on? (why not get a machine shop to put the thing on "Permanent" with a little fancy welding and machining to correct any Harley C Heap ass production Garbage?

  • @obfuscated3090

    @obfuscated3090

    6 жыл бұрын

    " after 104 years it time to start building a bike you can put on high mileage " They did, it's called the Evolution. Twin Cams and M8s are bean counter motors. The Evo is a far superior engine for longevity. Other brand large displacement V-twins don't use that stupid compensator either. They run cush drives in their rear wheels. Those have been common longer than most people reading this have been alive, just not on HDs though Japan edition Sportsters have them. A solid sprocket never gets "compensator issues" but of course those are referred to as "compensator eliminators" by the aftermarket.

  • @DobermansRock

    @DobermansRock

    5 жыл бұрын

    Actually the TC has a lot to offer over the Evo. I will bow and say it only existed for a couple years. The Evo was beyond a mile stone engine. People forget we are taking a radial Aircraft engine and fitting it into a bike. So for most who are engine illiterate. They don't understand pushrod engines. Everyone wants a high rev motor. Until they have to do a long trip. I like the perfect vibe of a tuned twin on a back highway. I fucking Zen out on shit for hours down the road. Man I don't give an empty can of beans to anything that changes the 45 D. Lets just make it more reliable and rumble on.

  • @bobwhite1734
    @bobwhite17343 жыл бұрын

    Great video. Could you tell us what the ID and OD and the thickness of the middle size belleville washers (the newer SE ones)?

  • @riachardpaul943
    @riachardpaul9432 жыл бұрын

    I had my compensator replaced in 2016 i wonder if they installed a newer version on my 2008 RG ?

  • @coronalandsucks
    @coronalandsucks7 жыл бұрын

    Well, after 2 SE Compensator replacements on my 2007 FLSTN, I've had it with crappy Harley replacement parts and shitty plastic oil scoops... hello! I'm definitely going with a Baker comp this time. You suck Harley! This Compensator issue, along with a long list of weak, poorly engineered parts convince me and many others that Harley is deliberately doing this to soak us for every friggin penny they can. Well, not this kid anymore! My stupid days are over! Did everyone notice that Doc Harley never responds. He knows these comps are junk, but he's got skin in the game. He likes fixing your Hogs every 2 years. Keeps him employed!

  • @allred53
    @allred532 жыл бұрын

    Oh my .I have an 03 wide glide. Stock motor. What would I choose to upgrade compensator?

  • @bigbuds77
    @bigbuds772 жыл бұрын

    What's the best compensator for 2016 Street glide just put. Ams in now watching this I'm a little worried

  • @nobodysreview6137
    @nobodysreview61374 жыл бұрын

    Whats the upgraded compensater you talk about from 2014 called. I have a 2013 Streetglide and its been great but if its ever apart maybe i'll drop the better one in.

  • @kahueranepia8656
    @kahueranepia86562 жыл бұрын

    Hey doc how do you turn off your head light street 500 while you're riding because its on all the time

  • @ronj2110
    @ronj21102 жыл бұрын

    I have a 2014 Street Glide which compensator you recommend stock or other kind please let me know if anyone knows which is better thank you

  • @lcmlb21
    @lcmlb215 жыл бұрын

    Great info you got my subscription...

  • @waynegto1484
    @waynegto1484 Жыл бұрын

    Doc, I have a 2019 M8 114 with a stage 2 kit in it should I be thinking about a compensator upgrade

  • @karibordi2082
    @karibordi20824 жыл бұрын

    As a matter of fact Harley doesn't have a solution for 07 (06 Dyna) TC compensator. Even the SE compensator is useless. There are several other solutions that are being mentioned here. He doesn't talk about the "automatic" chain tensioner which stretches the chain so tight that just about every bearing fails in the primary.

  • @54chewbacca
    @54chewbacca2 жыл бұрын

    So, I have 2018 RoadGlide with a Stage III upgrade. The compensator is starting to make a clanking sound, and the torqued isn't where it was - Is the stock compensator still ok, or do I need something stronger?

  • @2003Harleyguy
    @2003Harleyguy5 жыл бұрын

    I appreciate these videos but... I have a 2003 CVO Road King with a Screaming Eagle 103 cubic inch motor. The 88 motor started production for model year 1999 through 2006, you don't even show one of those compensators. Don't even show a suitable replacement either. Don't know why you're ignoring the massive number of bikes now needing a new compensator to replace the CRAP comp that harley installed but it would have been helpful information for me. Thanks anyway.

  • @vulcanman64
    @vulcanman646 жыл бұрын

    I have a 2016 road king with 15000 kms and my compensator is getting replaced. Very noisey. Not sure why it would go bad at that mileage since they’re supposed to be tough as hell.

  • @brucesantacory1390
    @brucesantacory1390 Жыл бұрын

    i just went to the screaming eagle on my 2008 King

  • @crushednutts8934
    @crushednutts89343 жыл бұрын

    Great Videos. So my 2013 Deluxe 103 has s&s .583? cams installed, but to put big jugs on it I'd have to also change out the Compensator? Do I have that right? Thanks.

  • @mopar340dave
    @mopar340dave6 жыл бұрын

    Why would I pay HD for a fix that it never should have needed, especially since it's obvious that they still don't have it worked out?

  • @dennythomas8887

    @dennythomas8887

    6 жыл бұрын

    Are you kidding me? Every thing on the road no matter who made it has weak points that the manufacture doesn't want to fix. 2 wheels or 4 EVERYTHING out there has problems.

  • @andymotl

    @andymotl

    6 жыл бұрын

    denny thomas If Ford or GM sold a car all the while knowing there was a major underlying issue with a major component in the engine and never told the customer and refused to warranty engine failure while the vehicle was under warranty... Are u kidding me!? They'd be sued and recalling every model by a court order...

  • @mopar340dave

    @mopar340dave

    6 жыл бұрын

    Show me another manufacturer with a major driveline component that has been jacked up for years and still isn't right.

  • @chetlovesamerica6783

    @chetlovesamerica6783

    5 жыл бұрын

    My 2007 Honda vtx 1300R ,4 valve per cylinder, 2 spark plugs per cylinder, jetted carb,open air ,Vance Hines,6 speed ,,only needs gas and tires to go around the country ,no problems. Im going to look at a 2008 heritage Springer Screaming EAGLE 110,cvo,6 speed tranny ,,105th edition. Can anyone tell me if this is a good motor ??,,,,it ain't cheap,!-help!-☆

  • @bill3641

    @bill3641

    5 жыл бұрын

    No matter what you ride or drive on the road , we're just guinea pigs for the manufacturers.

  • @rustyshorty3640
    @rustyshorty3640 Жыл бұрын

    I just developed the 'dreaded' stator grommet leak on my Stage 2, 2001 FXDWG! Damn! Any ideas/ tips to fix, without replacing the stator? (which is fine)

  • @jimmycrackcorn1783
    @jimmycrackcorn17834 жыл бұрын

    2003 124” Fatboy what kind of compensator upgrade options would be best??

  • @dougfresh1341

    @dougfresh1341

    3 жыл бұрын

    Darkhorse ManOWar.

  • @aramos811
    @aramos811Ай бұрын

    I have a 2009 Ultra Classic with 64k miles. I bought it about a month ago. Can I replace the primary tensioner to a Baker brand as a preventive measure to help whatever is going on in the power train?

  • @rrider993
    @rrider9936 жыл бұрын

    Spring Inversion? Baffled by the orientation of the disc washers taken out of a Compensating cover from a 95 Evo, and trying to identify what a new spring pack has for disc orientation, I had to consider: can the Bellville springs "invert" under load? Reading up at www.vinscospring.com , it turns out, when the outer edge of these springs are contained, or trapped, yes, they can invert. Maybe that explains what I found - all springs oriented in the same direction, or parallel. I find it difficult to see how they are orientated on the new factory pack without dissembling it. At $275.00 , no thanks. Logically they should be 2 pair, back to back.They weren't and that's what led to my original request for help. In my OP, I said they are not back to back based on what I found on a used one. Maybe I am wrong. Perhaps the answer to the appearance of the springs NOT all being " back to back" ( what I believe is termed "in series") was also found in the information on the Vinsco web site. They describe one reason for having parallel orientation is low friction (useful in the HD case) and combining parallel and series orientation to match required needs. Is that what we see, (or can't see) when we look into the edges of a new spring pack? They do not appear to be all back to back (in series) as in the new removable TC HD springs are positioned. Perhaps, the first two discs are back to back, the next two parallel and facing the opposite direction? Could that have allowed #2 dics to "invert", resulting in all discs being pulled from the cover all facing the same direction? I'd like to hear from someone who has pulled apart an early style disc pack, in new condition. Does any of this matter?... probably not. But it is an interesting study into the details of what can crap-out on the seemingly bulletproof early style compensating sprocket system and how they work.

  • @twolaneblacktop8034
    @twolaneblacktop80346 жыл бұрын

    If you really want powerful, strong and reliable.. buy a Baker.

  • @joshrandall5297
    @joshrandall52976 жыл бұрын

    Closeups of the parts would be nice.

  • @1SonOfMoon1
    @1SonOfMoon13 жыл бұрын

    What’s in a 2011 heritage softail?

  • @f150brian
    @f150brian4 жыл бұрын

    Doc, do you see any reason that I shouldn’t just buy a new rotor/spring pack assembly (part #40356-07) and replace that myself? I see them fairly cheap online. I’m thinking that may fix my compensator noises and hard starts on my 2009 FLHX with 28,000 miles. At least maybe for a little while till that part wears out again?

  • @williamyoung3340

    @williamyoung3340

    2 жыл бұрын

    It's an inferior design overall and will fail again. The new S/E one is worth the price.

  • @michelestrous960
    @michelestrous9602 жыл бұрын

    Question 09 crossbones making a hooting sound help

  • @theoldboyscout3662
    @theoldboyscout36622 жыл бұрын

    Whats your thoughts on a compensator eliminator? Specifically on a 2008 dyna 96ci

  • @Lowcountryharley

    @Lowcountryharley

    2 жыл бұрын

    The short answer is "no", we wouldn't recommend it. The change can lead to premature wear and failure in other parts of the powertrain like the clutch basket, primary chain, etc. If you are having concerns with your motorcycle, there may be more appropriate solutions for you to entertain. The place to start will always be with finding out why you want to change it, and what condition you are trying to address

  • @theoldboyscout3662

    @theoldboyscout3662

    2 жыл бұрын

    @Low Country Harley-Davidson I started looking into it purely for the preventive maintenance factor. I upgrade my cams to the woods 222, and during my research was lead to the possible issues of the hydraulic tensioner, (getting too tight and not loosening) which I like to tinker also so decided I want to replace that with a manual tensioner. Which brought me to the possible issues with the compensator, and so I figured if I'm replacing the tensioner, then why not do the compensator. Only to find that even the replacement compensator can have issues of their own. Which brought me to the eliminators. I've done a lot of digging on HD forum, ect. And the only downside I find (I don't mind the extra noise or surging or feeling the motor) is that people say it COULD cause issues with the crank not being welded and all but I can't find anyone that says it DID cause issues for them. And also the options with the eliminator to go with a 32 tooth instead of a 34 appeals to me too. So I figured with all the videos of yours I watch you would be the guy to ask for straight answers, and most likely to have seen real world results of running them rather than what might happen. And thanks for the quick response, did not expect that.

  • @theoldboyscout3662

    @theoldboyscout3662

    2 жыл бұрын

    @Low Country Harley-Davidson so short answer is no, but would you mind going in to the longer version? Have you personally ran into issues caused by eliminating the compensator? And the idea of eliminating for the lower tooth gearing, would that increase the possibility of issues of using the eliminator or issues of its own? I like the idea of the lower gearing because as is now, I like the performance of the bike with the woods 222 cams for the most part just going from a stop and lower rpm is just ok. Where and how I ride is not much highway, I rarely ever hit 6th gear. I know there's the dark horse compensator that supposedly works similar to an eliminator but as far as I know they only make the 34t gear.

  • @tricgix2949
    @tricgix2949Ай бұрын

    17 Rking m8...Took my comp off to replace with a low mileage comp assembly. I found a extra flat washer attached on the old comp ramp but the newer one doesn't have this flat washer. I checked parts diagram and manual but it doesn't show extra flat washer on ramp either. What's happening.??? Anyone?

  • @tommartin7026
    @tommartin70262 ай бұрын

    My 2017-103 Heritage softail compensator took a shit at 11,xxx .

  • @foreverfree6685
    @foreverfree66856 жыл бұрын

    Hmm, you said the 06 was different than the old style like evo and early twins, but my 06 streetglide has the same one as my evo, my 2000 softail, 2001 twin cam bmc chopper, and fyi my softail runs down big bikes and i beat the hell out of it and its as reliable as anything else and has been all over the country. Built motor, and old simple style compensator

  • @levialston518
    @levialston518Ай бұрын

    I have a 2010 road glide so does it have the screamin eagle compensator, haven't taken it apart yet but want to order parts

  • @3percentmick705
    @3percentmick7054 жыл бұрын

    So the first compensator you showed is still on the 99-05 twin cam also?

  • @williammarszal3245

    @williammarszal3245

    2 жыл бұрын

    Yes on 5 speeds works perfect

  • @itemps
    @itemps4 жыл бұрын

    what about the compensator in a 2017 twin?

  • @hog-boy-8843
    @hog-boy-88435 жыл бұрын

    Tractor technology at its best?

  • @salvatorecarapazza248
    @salvatorecarapazza2485 жыл бұрын

    Doc... Something dropped on the floor Sir.

  • @pharaohnile867

    @pharaohnile867

    4 жыл бұрын

    Ya I heard something hit the floor it went "ping ping ting " lol

  • @Jonathan-L

    @Jonathan-L

    3 жыл бұрын

    @@pharaohnile867 I heard it go ting, ping, ding ... then I realised I had my headphones on the wrong way.

  • @claudesmoot1880
    @claudesmoot18805 жыл бұрын

    Over 10 years to fix one problem.....

  • @RoadKing05FLHR

    @RoadKing05FLHR

    4 жыл бұрын

    Lol, it was never a problem that needed fixing. You did not pay attention very well.

  • @jameslanning8405

    @jameslanning8405

    4 жыл бұрын

    Well, no... The compensator has been going through its own evolution, to "keep up," with the larger more power and torque engines. If the V-twin remained a 1200, then there'd be no issue with compensation. But as explained, as the engines grew larger and more powerful, both in HP and torque, they outgrew the compensator of the early evos... Same with clutch plates and springs. You can get a clutch built for a tank! But the clutch springs are so stiff, they'll wear your left hand down, if you gotta do a lot of shifting... Your left forearm will look like Popeye's!!

  • @stevenmccabe636
    @stevenmccabe6365 жыл бұрын

    What do you think about the 2017 compensator on a street glide special

  • @edwinparedesnjusa

    @edwinparedesnjusa

    4 жыл бұрын

    Still fucked

  • @jameslanning8405
    @jameslanning84054 жыл бұрын

    I don't know... With all the vibrations, and heat that are in a Harley engine, is it really a smart thing to rely on a "glued in," plastic part, that's there to be an oiler for such a vital part of the powertrain?

  • @shereefbabu
    @shereefbabu5 жыл бұрын

    Hi sir how to update the rotor for 2010 Turing model it’s should replace or can remove with some lath machine ? It’s possible? Just need to know how’s the thickness for new model rotor and the spring one ..! Replay me please I’m waiting your valuable advise thanks regard

  • @shereefbabu

    @shereefbabu

    5 жыл бұрын

    The compensator kit with me there is all but no more rotor

  • @alleyoop4465
    @alleyoop44655 жыл бұрын

    Damn, when I baught my bike they said the whole thing was a compinsator. Now what???

  • @PhatboyHD88
    @PhatboyHD886 жыл бұрын

    Buddy,, you are employed at a dealership ? Because the twin cam started in 1999,,with a 88ci with the available 95 ci model for CVO Bikes and for purchase separately from the SE catalog,, then in 2006 was the start of the “stroked” 96ci twin cam.. which used the same pistons ( bore)as the 95 ci,, bit with longer connecting rods hence the “Stroked”engine ,, your dates are all off along with the compensators for those different configurations... i know all this because i am a cert Harley mechanic ,, and have been riding them and building them for 35 years... my point is to become more respectable so that ppl will trust in what you are saying have all the facts straight ,,, my 2cents...

  • @chrisgarland1401

    @chrisgarland1401

    5 жыл бұрын

    PhatboyHD88 . Yep. Lost me at that very moment.

  • @mattgillette9546

    @mattgillette9546

    5 жыл бұрын

    @@chrisgarland1401 yes same, considering mine is 03 88ci, I was like wtf is mine then if 88 didn't come out till 06 hahaha

  • @philz7462

    @philz7462

    5 жыл бұрын

    I thought I was losing my mind ...

  • @parkeslife4323

    @parkeslife4323

    5 жыл бұрын

    PhatboyHD88 I thought the 96 used the same piston bore size as an 88 just with increased stroke to give the 96ci of displacement?

  • @peterjones6945

    @peterjones6945

    4 жыл бұрын

    @Mike Greer Basically, I worked on Japanese bikes since late 70's. If Harley had any sense whatsoever they would have known chain driven narrow angle v-twins beat the shit out of chains and tensioners. Honda had at least 5 revisions for the CX500 between 1978 and 1982 (500cc, narrow angle push-rod motor) The last iteration worked for about 18,000 miles before giving up unless bike was used as it was designed (ie, keep it over 6k) That isn't feasible with HD big twins (they will destroy big end bearings if used continuously over 6K) Harley should have fitted cam gears instead of chain. (although even Honda had some disasters with the VF750 gear drives) The problem is the load reversals at low rpm causing chain to whip around all over the place. I haven't looked into what HD are doing with twin cam nowadays, last time I got involved was around 2011

  • @Blap552
    @Blap5523 жыл бұрын

    I'm hearing Squeaking on firm acceleration on my 08sportster,the forums say to check the compensator and clutch basket?

  • @highmilagerider1154
    @highmilagerider11545 жыл бұрын

    I'm thinking of buying a 2019 HD Heritage classic with the 114. I have been doing a lot of research into Harleys and their reliability. I live in Canada and can only ride 6 months a year. I ride 35,000KM per season. So every 3 years I ride over 1000,000KM. My current ride is a 2014 Kawasaki Nomad 1700 with 164,000KM on it and I have done nothing to it mechanically except wearable items and gas. It has never broken down and never needed to be fixed. I want to know if I can expect that kind of reliability out of a harley given how many KM's I ride? This will be my retirement motorcycle and I will ride even more then I do now. Can I ride 100,000 to 130,000KM (81,000miles) every 3 years reliably or should I buy another metric (Japanese) bike? I have seen hundreds of KZread videos of people having nothing but problems with their new and old Harleys. Everything from Compensator sprocket and Spring pack Failures to the Pressed Flywheel coming out of true by more then .003" damaging the Pinion shaft bearings, the oil pump rotor and the Cam support plate bearings which can cause catastrophic engine failure, Failure of the Two silent chain drives (one to drive the oil pump and one to operate the two camshafts) due to a failure of the Plastic chain Tensioners, Failure of the Oil pumps which are inadequate and only pump out 3-8psi of oil pressure at idle which is close to 0 oil pressure, which is why all Twin Cam engines run extremely hot, Inability to fix Coolant leaks, the location of the Copper Stator is placed in the hottest part of the engine (right up against the left side crankcase, in the Primary drive where heat is the greatest so stators may need to be replaced often, and finally the Starter is behind the hottest rear cylinder and catches a lot of heat instead of being located forward of the engine where its coolest. I have not seen one video of anyone owning a Harley motorcycle that has put Hundred's of Thousands of KM's on their bike and not had to essentially rebuild the whole motor frequently. Is that because their not made to last? I'm not trying to pick on HD motorcycles or be an ass, I just need to know if a Harley could be the right bike for me given the huge number of KM's I ride? I expect to put 500,000KM on this bike in less then 10 years. Thanks for your help.

  • @amungus76

    @amungus76

    5 жыл бұрын

    NO it wouldn't be the right bike. Goldwing. more power than 1700 twin and long engine life.Only thing is overall look is different. :)

  • @rafdecc
    @rafdecc8 жыл бұрын

    HEY DOC THANK YOU. I HAD MY 2010 DONE BECAUSE IT WAS FAILING. I WAS TOLD AND YOU CONFIRMED SAME HARLEY USED THE COMPENSATOR FROM THE 88 SERIES ENGINE, THUS THEY USED THE CUSTOMER FOR THE GUINNIE PIG TEST BED. PRIOR TO THIS VIDEO I CAME UPON A VIDEO FROM A SHOP IN FLORIDA WHO INSTALLED A BAKER COMPENSATOR. MUCH BETTER. WHY NOT GO TO SPECIALISTS INSTEAD OF USING THE CONSUMER. WHEN SOMEONE IS PAYING 25,000 TO 40,000 PLUS FOR THESE BIKES WE SHOULD BE ABLE TO GET TO STURGIS AND BACK. MY BIKE LEAKED EVER SINCE THE INSTALL. I HAD IT BACK AS I TOLD THEM IT WAS THE GASKET. THEY SAID NO IT WASN'T. IT WAS THE SEAL ON THE SHIFTER LEVER. I NEVER HAD A LEAK UNTIL THEY DID THE WORK. SO IT JUST COST ME ANOTHER 300 AFTER THE 800 I HAD SPENT TO FIX THE LEAK. I LOVE MY HARLEY BUT YOU BEST TELL THE ENGINEERS AND CEO HARLEY WILL GO THE WAY OF GENERAL MOTORS. THAT IS FACT. THE LARGEST AUTO MFG. IN THE WORLD BAILED OUT BY GOVT. I WON'T BUY ANOTHER GM PRODUCT EVER. YES 2016 THEY FINALLY GOT IT RIGHT!!!!HOT DAM!!!I HAVE THE SCREAMING EAGLE COMPENSATOR INSTALLED THANKS TO A GOOD, HONEST, KNOWLEDGEABLE SERVICE WRITER WHO GOT FIRED. NOW IT'S A FEMALE IN HIS PLACE. LIKE THE FORBES OR OTHER ARTICLE NOT SURE, SUGGESTED HIRING SOME SIZZLE TO GET SALES UP. YOUR GOING TO NEED A LITTLE MORE AS THE CONSUMER WAKES UP. WE ARE AWAKENING TO MUCH MORE. PLEASE COMMENT ON THE SE COMPENSATOR AND IT'S RELIABILITY. SORRY FOR MY VENT BUT I COULD OF GOTT'N INTO THE RADIO'S FAILING WHICH AREN'T THE RADIOS BUT THE FUCKING HD BRACKETS AND BOLTS TOO LONG FOR THE HANDLE BAR CONNECTION BELOW THE RADIO. THAT COST ME 250 BY A VERY RELIABLE HARM AND KARDON TRAINED SERVICE CO. "IRON CROSS." PLUS ANOTHER FEE TO HARLEY TO INSTALL IT. TELL HARLEY I WANT TO BUY AMERICAN AS MANY OF US DO, BUT YOU AREN'T MAKING IT EASY.

  • @coronalandsucks

    @coronalandsucks

    7 жыл бұрын

    Vent away my friend. I agree wholeheartedly! You should have bought the Baker Compensator though. That SE one will fail. They still haven't figured it out and I don't think they want to. Cash cow... lol.

  • @docholiday1034

    @docholiday1034

    7 жыл бұрын

    Had a couple bakers already fail.....so your so wrong....

  • @josht6966

    @josht6966

    7 жыл бұрын

    how long did it take for the bakers to fail?

  • @Sportybob

    @Sportybob

    7 жыл бұрын

    Can I use this on 1200c sportster

  • @dougfresh1341

    @dougfresh1341

    6 жыл бұрын

    Like Brock says above... Vent away!... But, I don't know if you intended to type in all capital letters, it seems like your yelling at us. :-) No doubt most bikers want American HD bikes. They do make it difficult. My suggestion to fellow bikers is to learn to work on them yourself. I actually enjoy it, when I have the right tools. What I don't like is when HD sells an "upgrade" kit like the SE compensator and then DOES NOT include everything needed... like the epoxy and the T70 torx socket. $10 items. >:[ The great thing is these bikes are mostly easy to work on. And there are A LOT of people here on KZread to walk you through most any repair. On another note...let's see what happens with the Milwaukee 8.

  • @yertelt5570
    @yertelt5570Ай бұрын

    I have a 2010 RK with a 96" twin cam. Other than some slip on tips everything is stock. The bike isn't ridden hard, how likely am I to have compensator issues? I've heard it's more prevalent and 103' and larger motors. Also, from your video it sounds like there was some upgrading around 2010, but it didn't sound like it was a universal change as you mentioned some 2011's having the older compensator. Is there a way to determine which compensator I have without tearing it all apart? Thank you.

  • @johncorter183
    @johncorter18310 ай бұрын

    Doc, I ride a 2015 Roadglide CvO. What is the best compensator for it?

  • @jb-ik8sj
    @jb-ik8sj6 жыл бұрын

    What kind of hub goes with the bigger springs?

  • @kirkleaman6863
    @kirkleaman68636 жыл бұрын

    Backer and never look back💪🏻

  • @finley614

    @finley614

    5 жыл бұрын

    Kirk Leaman Same here. Bakers the way to go

  • @dougfresh1341

    @dougfresh1341

    3 жыл бұрын

    Or Darkhorse ManOWar. Installed and rides awesome. No more clunk or drag.

  • @peterjones6945
    @peterjones69454 жыл бұрын

    LOL, 2014 before they started using 1940's technology. HD 'invented names for parts. 'Compensator ' is a misnomer, it's a spring loaded face cam shock absorber, know by 'everyone ' else in the world as a primary damper (BSA,Triumph, et.al.)