dude the patience you have is heroic. i wuld have lost my shit after removing 5 bolts.

This video was 100% straight forward. I'm switching out the front grill on my Altima. I love the step by step instructions very hepful thank you so much

Thank you for uploading this video! I had to change my headlight assemblies and after watching this I went into the job fully prepared. Thanks again

Your video looks to be straight forward. I need to swap out the headlight assemblies on my wife's Altima. I'll be using this as a reference guide. Thanks.

thank you. i needed to replace my grill and your video probably saved me an hour.

Need to swap the defective headlights on mine. This is definitely helpful as a guide

This was sooo helpful thank you for making this. Glad I could do it myself without overpaying at a shop.

I'm actually doing this tomorrow. Same year same car. Thanks for the video it will help for sure

@jkhan08

Жыл бұрын

Glad it helped

This video really helped me out. Thank you

8:53 I think that’s where the front radar sensor is in some models. Thanks for the informative video

@babiboib7

Жыл бұрын

Thank you

@k1llshot

9 ай бұрын

Two years later (in French accent)… I believe that's the Tow Hook Cover.

Awesome video !!!👍

Omg that's how its shipped? Nty I will buy used in my area. Thanks for vid

Looks great!

What screws are needed for the bumpers

The screw under the wheel, did it come with a washer ? I totally misplaced and forgot which one goes there

All these videos are awesome. My problem is that our Altima has an additional molding around the wheel well. Not sure how it’s attached. 😢

Very helpful keep it up

Of course the hardest thing putting the bumper back on is what you skip lol

@jeremysanchez1656

Жыл бұрын

Just plug and play

@derricklafrance9440

7 ай бұрын

I'm about to replace a new used one. What step did he skip?

How did this bumper hold up compared to the OEM after the replacement? I'm thinking of doing it to mine.

well done.

Good post. Jersey Strong

Exelente trabajo

Good job, looks great!

good job Thank you

Where did you order your bumper from cause I have the same year and model

how did you get it the same color as your car ?

where can I order. the front dumper? for the nissan altime 2015 SL

Hate that they glue the front plastic on the headlight assembly, but at least the replacement part will be easy to install, thank you fam

there is not much of a bumper under that cover is there? i’m glad for a 2nd reason i watched your video. thank you for sharing this.

Can you order the bumper color to match your car?

Beautiful, If the front license plate isn’t required in your state… I Would leave it as is. 2015 Altima Owner Here.. My headlights are stressing me out.

Thanks man but where’d you order the bumper from man

Where do you buy your bumper in black?

What tool did you use to remove the push pins??

@Seluecus1

7 ай бұрын

it's a Trim Removal Tool, specifically for Pins. You should be able to find it in just about any Automotive Store, like O'Reilly's, Auto Zone, Napa, etc... Edit: I just realized i commented on a 3yo post and that you probably already solved it yourself. :D

@Followerofchrist2091

7 ай бұрын

@@Seluecus1 haha all good! Did fix it eventually 😁

That's a job doing it just by yourself. Two more hands would have been helpful, especially putting it back on. Plus the two hands could have been the camera man while you did the hard work. :) Good job keeping it to the point and also pointing out things other videos left out.

Your Nissan is graphite blue right? Did your new bumper come that color or did you get it painted?

@jkhan08

2 жыл бұрын

It was black. The replacement bumper is not Oem but it came painted color matched

@gabebeniamin6859

2 жыл бұрын

@@jkhan08 what website ?

I wish you would have shown us how to remove and replace the turn signal lights and the housing as well as going step by step with some other parts that you skipped through. Good job on what I did see though.

@LoLoLikey

Жыл бұрын

I’m currently trying to replace my front bumper and the issue I’m having is how to get the turn signal light and fog lights switched out. The fog light has two 10mm bolts, but I still haven’t been able to figure out how to get the turn signal lights out. The metal clips come off the plastic and you can push the tabs through then on the sides. But, there looks like there is also a teeny tiny bolt (def not 10mm) that has to come out as well. Any help or insight you can give in trying to remove the turn signal lights is greatly appreciated.

Hi, can you tell me a list. of tools I need to remove the bumper and headlights, please?

@abelscaliber7969

4 жыл бұрын

10mm socket ratchet flat and Phillips head I think that’s its

Did u have to paint it or did it already come that color

@jkhan08

Жыл бұрын

It came painted to match card color. Had to provide the seller paint code

Dm tht shit lot of work

Where did you buy the bumper?

@jkhan08

2 жыл бұрын

Amazon from MBI auto. You have to give them the paint color code and they’ll paint it to match your car.

Where did yu buy yur parts

@jkhan08

2 жыл бұрын

Amazon from MBI auto

Let me guess paint a part. I know because that's where mine come from

is the bumper painted or just primed

@ayubhaji6828

3 жыл бұрын

definitely painted in, when you buy the bumper and heat dry it, it will look like 0:50 where its all faded.

@jkhan08

2 жыл бұрын

Painter and primed.

How long did it take using the hair dryer to get the bumper into its Useable shape? I had one shipped to a Nissan Dealer and they say it's UNUSEABLE!!

@jkhan08

2 жыл бұрын

I gave up with the hair dryer. I just left it open and it slowly opened up.

Looks great! What a pain though. Probably saved a lot of money from not going to a body shop.

You don’t look like you know what you’re doing.

How did you remove the blinker harness that connects to the bumper by the fog lamp?

@jimmymarin3704

3 жыл бұрын

Exactly,before you get it out,take out the harness,and the way he get that bumper out 🙄