Feeling very accomplished after changing out these bulbs by myself thanks to your video. Thank you!!

@MotorCityMechanic

2 жыл бұрын

Your welcome and thanks for checking the channel out

6 years ago and still helping people in 2022. I appreciate it. I don't need to do this (yet) but decided to look up how to since I found another video of yours useful regarding the Rene. This was the perfect length for a video, everything you need to know and nothing you don't. Well done! I saved it and gave a thumbs up. Future me is very grateful.

Thanks! I just got the error message my reverse light was out. Easy video to follow and no BS You rock!

@MotorCityMechanic

2 жыл бұрын

Much appreciated G!

7 years later and I have my autozoners still watching these videos. Great instructions

@MotorCityMechanic

Жыл бұрын

Many thanks for spreading the word/videos. Much appreciated. I always am humbled when I go to the parts store and they know of the channel

Thank you for the video, very precise and easy for anyone with little knowledge to follow along, great job by you and the shop for continuing to provide quality repair videos.

@MotorCityMechanic

6 жыл бұрын

Many thanks for the great feedback. Appreciate you noticing the little details that I try to spend alot of time on. I try to improve with each video so make sure to check out my newer ones and dont forget to subscribe

Have just bought a 2015 Renegade and viewed your video for the first time. Found it clear precise and informative, I will be sure to visit again.

@MotorCityMechanic

8 жыл бұрын

Thanks Mick. I plan on making more renegade videos soon. Just have to make more time. Make sure to subscribe so that you get notified when videos such as those get uploaded

I, 24 F, just successfully changed out my first brake light evvvver lol. I’m so excited. Thank you for this!

Incredibly helpful! I feel super accomplished after changing out my wife’s bulbs 🤣 I’m subscribed 💯

Awesome video- just finished replacing the bulb on my 2016 Renegade following same instructions. Only slight hiccup I had was reconnecting the electrical connector. It’s a REALLY tight fit to get your hand in to guide it all into place and took me a few attempts to line it all up while blindly pushing it together with two awkwardly placed fingers, lol.

@MotorCityMechanic

4 жыл бұрын

Glad it eventually turned out well. I appreciate the feedback on the video and for taking the time to comment. Make sure to subscribe Aaron and check our my other videos as well

Very straightforward explanation was great and easy thanks

Another great video. I just put in led reverse lights. They look awesome and I didn't have any problems. Thanks to your videos Ive now put in led headlights,reverse lights,and running lights. Thanks again

@MotorCityMechanic

6 жыл бұрын

Cool. Glad that it worked out. Always glad to see that the videos help out.

@glennhernandez6455

6 жыл бұрын

Did you have any bulb out warnings? If not where did you get your led bulbs?

Thanks man, you made it so easy. I was wondering how the hell I was going to get that out to change it lol

thank you for this...i back into a fence post, and cracked the molding around my tail light, and hope to replace it on my own.

@MotorCityMechanic

6 жыл бұрын

Your welcome. Thanks for finding the video and for commenting.

Thanks for the video! I'll be doing this tomorrow

videos are great! easy to follow great description of layouts. These videos definitely helped out a lot with replacements and some modifications with led lighting. well done sir!

@MotorCityMechanic

6 жыл бұрын

Appreciate the kind words. Always glad that I can help out. Thanks for the comment and make sure to subscribe

thank you. Single mom here - appreciate you so much for the help!

@heidil944

6 жыл бұрын

I replaced both of mine that I damaged, Thanks to you!

@MotorCityMechanic

6 жыл бұрын

Glad it turned out. Glad I could help and my hats off to you! Taking on your own repairs and being a strong single mom is a great example to show your children. Thanks for the comment and make sure to subscribe

Very helpful. I had to change mine today, this video was extremely helpful.

@MotorCityMechanic

3 жыл бұрын

Glad the video helped! Thanks for commenting

Thank you! Your videos are extremely helpful.

@MotorCityMechanic

8 жыл бұрын

+Anthony Becerra Your welcome and thanks for watching. Make sure to subscribe

This was awesome tutorial! Thank you

Appreciate the help!

Excellent tutorial. I would’ve appreciated your jotting down the bulb numbers in your description. I went to purchase the bulbs where the store did not have a bulb catalog - digital or hard copy.

Thanks. Very helpful!

@MotorCityMechanic

5 жыл бұрын

Your welcome Clayton. Appreciate the feedback. Make sure to subscribe if you havent already

Wow I almost brake it triying to open forcing it. Thank you very much

I have a 2018 trail hawk renegade , the passenger side brake light does not have an access panel. It has a beats audio installed so the whole section in the right side cargo is just one plastic piece. How do I access the brake light unit. Many thanks for your informative videos

Thank you.. so easily done and saved me some $$

Appreciate it brother salute from Costa Rica

@MotorCityMechanic

3 жыл бұрын

Your welcome and thanks for watching Alvaro

Just did this in a parking lot at Walmart. Thanks brother!

@Sammy10100

3 жыл бұрын

Didn't know u new him.

Thanks I needed to know about the seat belt fastner

Thank you for you advice

@MotorCityMechanic

3 жыл бұрын

Your welcome! Thanks for watching

Nice. Video very well done

@MotorCityMechanic

Жыл бұрын

Thanks for the kind words Lawrence!

Great video and detailed step by step instruction

Thanks! That really helped me to get the light off. It seems like my light had the ground wire burnt and the pin corroded to about 40-50% of the size of the other pins. :-)

@mikaeldjur

2 жыл бұрын

Sounds like a renegade to me! Problematic little buggers but I still love it.

Super helpful! Thanks!

thank you! simple and straight forward!

@MotorCityMechanic

6 жыл бұрын

Appreciate the feedback! Thanks for watching and make sure to subscribe

You did mention the little bulb in the middle but did not say its name or code....either way very helpful!

Thanks, what a pain my wife's jeep is. My ford trucks, ya just reach in twist and replace the bulb. She likes it, it is a good little 4x4 at least.

@MotorCityMechanic

6 жыл бұрын

If mama likes it.....everyone likes it lol. It sure is old school technology for sure. Thanks Mitch for the comment and for watching. Make sure to subscribe

Thank you so much for share!

@MotorCityMechanic

4 жыл бұрын

Your welcome and thanks for the comment. Make sure to subscribe.

Great video, thank you!

Thanks. Anything different on a 2018 other then a smaller access panel?

Thank you

@MotorCityMechanic

Жыл бұрын

Your welcome! Thanks for watching and for commenting

Thanks for this! I’m hoping this has what has just happened to my 2015 jeep renegade. I came out of the car wash and suddenly warning lights came on. The forward collision warning and left side rear turning and stop lights don’t work. Do you think it might be water ingress?

Do you have good connection for 2017 rear driver side brake light assembly replacement?

Perfect! Thanks

@MotorCityMechanic

4 жыл бұрын

Your welcome Andy! Thanks for watching and make sure to subscribe.

Wow, great production!

Great technical video. thank you!!! [this version of your video has a LOT of cross-talk... probably another video being done in the background.]

Great Video and very detailed. I wanted to know if I would be able to put LED lights bulbs instead of the regular light bulbs in the rear lights of my renegade.

any idea where to locate the fuse for that puppy since you aint got the fuse holder no.2 like me?

The 2016 Jeep Renegade Trailhawk SUV has a recurring power seat problem that prevents the use of the 8-way and lumbar functions. The problem causes the driver seat to freeze and lock into a position on the seat floor tracks. This could create a serious problem in the event of an emergency. The dealer service department is clueless on fixing the problem.

@MotorCityMechanic

4 жыл бұрын

I personally havent come across this as of yet or had anyone else complain. I will keep my eye out in case things change.

Thank you for the video! I am having a lot of trouble pinching the lock to disconnect the light. Do you have any suggestions to help get it off? Thanks!

Thanks

I ask for help to change the rear right signal light they never show a video of changing the right side it's always the easy left side I need help with the right side please of a Jeep renegade 2017 rear signal light.

thanks!!

@MotorCityMechanic

2 жыл бұрын

Your welcome

wow im getting a renegade trailhawk soon and there still using those bulbs... im interested in installing a 15in led light bar on mine any ideas.

@MotorCityMechanic

8 жыл бұрын

I havent had the chance to installed a light bar on one yet, curious as well. Thanks for checking out the video and for the comment. Make sure to subscribe and help spread the word by sharing these videos with others.

Thanks, I'm going to get a bulb right now

Can anyone do a video on changing the right rear tail light for Jeep renegade 2017 please

Thanks, need to replace a busted housing on my mom's Jeep Renegade. she also has a shattered quarter glass on the rear passenger side, any idea where I can find info on replacing it? thanks again

Thanks for the useful video. I damaged my right rear tail light and the plastic cover around the tail light is broken now. I wonder, is it replacable? I detached the light compeletely by watching your video but couldn't figure out how to seperate the plastic cover around. Any tips would be greatly appreciated.

@MotorCityMechanic

8 жыл бұрын

Morning and thanks for the comment. I had the parts department check on the part and the tail light only comes as one piece so you cant replace just the outer cover. Thanks again and make sure to subscribe

hi, what is the relay for

Can you please show how to change license plate and dome light on renegade. Thank you!

Please keep up on any renegade issues. Thank you.

@MotorCityMechanic

8 жыл бұрын

+Tim Ewing Will do. Thanks for watching and make sure to subscribe

Thank you brotha

Hey hanks👍🏾

@MotorCityMechanic

5 жыл бұрын

Your welcome and make sure to subscribe

I have a 2017 Renegade. Will 1.9 inch long LED bulbs fit in the housing?

@MotorCityMechanic

6 жыл бұрын

Good question. I dont know how much room is in the housing.....never measured it to see. If I ever get the chance to remove another I will certainly make sure to measure it just incase. Thanks Fred for the question and make sure to subscribe

How would you remove the access panel if it has the rechargeable flashlight in it?

Very informative thank you

You stated that the two outside brake and running light bulbs were 1157. Can you tell me what back up bulb is used in this assembly? I intende to replace all three on each side with LED. I know that non canbus can be used to replace the 1157's but not sure about the back up light.

How do I replace the rear bumper red reflector on my 2015 Jeep renegade?

I can’t get the wingnut unscrewed....help!

Thanks for the vid.

@MotorCityMechanic

5 жыл бұрын

Your welcome Stan. Thanks for watching and for commenting. Make sure to subscribe.

multimedia video input? Thank you to help.

What are the 2 terminals on housing for?

legend!

1057 or 1157?

Good video dude, thanks

@MotorCityMechanic

8 жыл бұрын

Thanks Cesar! Make sure to subscribe and share the videos

Thank you dude

Thanks for the video.

@MotorCityMechanic

7 жыл бұрын

Thanks William! I appreciate you coming across the video and for watching it. Make sure to subscribe if you havent already

Gracias .. Excelente video, fue de gran ayuda

@MotorCityMechanic

5 жыл бұрын

Gracias por mirar y por las amables palabras. No te olvides de suscribirte.

very helpful

What if all lights on left side out message on dash

@MotorCityMechanic

4 жыл бұрын

That’s going to require further diag. First thing is making sure all those bulbs are okay. Otherwise checking the wiring might be needed. Nothing quick that I can point you towards, not a common issue. Thanks for asking and make sure to subscribe

I'm looking for a video about how to change the oil and filter.

@MotorCityMechanic

7 жыл бұрын

I will have to add that to my "to film" list. Currently I dont have one so I appologize

So how am I supposed to do

Thank you ...

@MotorCityMechanic

8 жыл бұрын

Thank you sir for watching. Make sure to subscribe

Thank you for u video!

@MotorCityMechanic

4 жыл бұрын

Your welcome and thanks for watching. Make sure to subscribe.

thanks

@MotorCityMechanic

8 жыл бұрын

+difasde tyl Your welcome.

Excelente Muito bem explicado

Do you know how to replace the upper center tail light on a 2015 Jeep Renegade? I have been unable to find a video. The light on my Jeep was damaged in in a hail storm.

@MotorCityMechanic

7 жыл бұрын

The steps are many it appears. The interior rear hatch panels have to be removed and then the "upper wing" unbolted and removed, then you have access to the assembly. Wish it was simpler. Might justify a future video possibly. Make sure to subscribe so that you notified when I upload videos such as that.

can you separate the red lens from the black part

@MotorCityMechanic

8 жыл бұрын

I dont know for sure....I will have to take a closer look the next time I have one off. The service info doesnt make any mention of it. Thanks for the question. Make sure to subscribe

@themixterchannel9954

7 жыл бұрын

Hi I need to separate de Black plastic from the red acrílico red plastic from the tail lights, but I coudn[t fin the way. If you see the part from the back you will se three RARE kind screws that holds the black plastic from the side, but I don't know what kind of tool is that. Any one saw that ? May be separating this plastic alow to take out the black plastic that surround the tail light in the front of the light.

@MotorCityMechanic

7 жыл бұрын

I will have to see the next time I take one off what is needed and if its possible. Thanks for the question and make sure to subscribe

thank you for informative video. I already subscribed. I have 2016 Jeep Renegade and planning to replace reverse back lights with LED bulbs. Can you please tell me which ones to pick and what types should I buy. Thanks!

@MotorCityMechanic

7 жыл бұрын

Thanks Matthew for watching the video. I havent had the chance to try and reply the bulbs with LED's personally. I have heard there may be some issues with the module not seeing the correct current draw and causing them to not work. The module is constantly monitoring the circuits and if something gets out of specs....it can turn the circuit off. Some people place inline resistors so that they can trick the system. But as mentioned I havent tried it myself yet. Thanks for watching and appreciate you having subscribed.

@matthewkemuel9682

7 жыл бұрын

thanks for your reply. I saw some LED on ebay with built-in resistors on them. They say they will work. I just hope jeep will give options on changing those yellow glow halogen bulbs.

@MotorCityMechanic

7 жыл бұрын

You never know.....they might one day. Thanks for the reply back

@markmorrison3108

7 жыл бұрын

Hi Matthew. be careful of any LED bulbs you buy on Ebay. I own a 2016 well 2 one is my son's and one is mine. I loved his so much I got my own. Do a lot of research on all LED bulbs. I'm an electrician and my house has all LED in it. Trust me brands are different there so I'm sure they are different in vehicles as well.

@fredhess6959

6 жыл бұрын

Try Oracle Lights. They have what you need. You can GOOGLE " Oracle Lights ".

Hi, where is the Oil Filter on the jeep renegade 1.6 multijet sport please?

@MotorCityMechanic

7 жыл бұрын

I send you a reply by email. Thanks for the question and make sure to subscribe

How would you replace the reflector on the the driver side bumper?

@mikaeldjur

2 жыл бұрын

Hey I know this is four years old but there's a panel to access that in the rear wheel well in case someone else sees this. Good luck!

That spring screw thing doesn't want to come off on my car.

hi How to make a connection to the camera back?

@MotorCityMechanic

8 жыл бұрын

+difasde tyl Morning. I haven't had the chance to deal with the back up camera as of yet. Removing the camera seems pretty simple from looking at the service information. Looks like you need to just use a plastic trim stick and go around the edge of the camera mount and unsnap it from the lift gate.

Hi David, what's your opinion about this vehicle??

@MotorCityMechanic

7 жыл бұрын

Morning Simone......for the most part they have been holding up well. Not many issues. Its still hard to get use to being that its basically a Fiat with a Jeep badge. Time will tell as they get older and have more miles. Overall it has a cool/unique look.

I'm making a connection rear view camera

Do you know which led bulbs I can replace those prehistoric ones with?

@MotorCityMechanic

9 жыл бұрын

***** Thanks for the question but no I don't. Sorry. In the future I will try to keep it in mind. Other option is to cross reference the bulb # from the video. Make sure to subscribe and help spread the word by sharing these videos with others.

@Jon.pascual

7 жыл бұрын

921's

@MotorCityMechanic

7 жыл бұрын

Thanks for the info

can you take the grill out

@MotorCityMechanic

7 жыл бұрын

Thats a video that has been requested alot lately. I will try to some time soon grab one and go thru the steps. Make sure to subscribe so that you get notified when a video such as that gets uploaded.

I went to a light specialist shop and when they tried to replace my reverse bulbs with LEDs, they said that error messages kept coming on about "the reverse lights being out". Do you have any idea why this might be?

@MotorCityMechanic

7 жыл бұрын

Alot of the vehicles these days monitor the bulb circuits and its looking for a specific resistance reading. This is how it can find out if the circuit is shorted or open and then in turn set a code and possibly turn the circuit off. When you change from the OEM bulbs to LED bulbs, the resistance reading changes and then the module will see that and then turn the circuit off or see it as possible "blown" bulbs. Some times inline resistors can be installed. I havent installed any LED bulbs in these vehicles to see what is needed to actually make them work. This will most likely be the issue thats causing your issue. Thanks for the question and make sure to subscribe and check out my other videos as well.

@jasonmorehouse3756

6 жыл бұрын

just make sure it says you leds are canbus compatiable and you will be ok

@glennhernandez6455

6 жыл бұрын

I have led canbus lights for the rear but still puts out an error. Any suggestions?

Me again! How do you remove the reverse light? want to fit Parking sensors, please?

@MotorCityMechanic

8 жыл бұрын

+Sylvester Walsh Hello again....The service info only states how to remove the housing, not the bulb only,. I will have to see for myself when I get time.

@shogunsan21

8 жыл бұрын

+MotorCity Mechanic Thanks, I just need to get to the live wire, to fit the Parking Sensors. Thanks again, yu have been a great help in the others!

@shogunsan21

8 жыл бұрын

+MotorCity Mechanic Just thinking again, perhaps I am wrong? Could I get to the Reverse Light wire in the Tail Light deportment?

@MotorCityMechanic

8 жыл бұрын

Sylvester Walsh I was thinking the other day....The reverse lights on part of the tail lamp assembly like in the video. Its the white "X" portion of the lens. Now that's on the US models.....I don't know if its the same on the export.

@shogunsan21

8 жыл бұрын

+MotorCity Mechanic Thanks again, I think it is different in England, God knows why? but the centre bit does not light up, I need to have a look, perhaps no bulb there? If not I might be able to fit one there? but I should be able to find the live reverse wire there! Thanks again, great Guy!!

Wtf you didn't take the fuck bull out