Thank you for being so transparent and going the extra mile for us Sport owners, making it easy to emulate your setup. I so appreciate it!! I'll make a video when mine is ✅

@amitsarjaikaran9290

6 жыл бұрын

Derek Townsley hey is there a way I could contact you? I am having issues with my honda display.

@Yo-by9fh

2 жыл бұрын

yea that would be great lmk

@Yo-by9fh

2 жыл бұрын

@@amitsarjaikaran9290 same

Great video! Getting a donor with all the connectors is the hard part I’ve looked for a month and no one sells it with connectors.

Awesome video. Thanks for spreading this information.

Dude this is awesome! I own the exact same car and will be doing this next summer.

Hi again Terry. I was the one asking you about the connectors on the back of the radio if u only have the females(on the back of the radio) and not the cut off wires(the males)..I wanna thank you for taking the time to answer my questions even tho i was confused on labeling the connectors..

Thanks for the awesome video duke..

This is awesome you are THE MAN!! TY TY

Thank you for this video, I want to buy this generation Accord but really want a better head unit

Just upgraded my Honda accord and wish I watched your video before spending all that money. I recommend to anyone who wants to keep factory programs if considering upgrading to a double din audio system.

@jesuschrististheonlytruth335

7 жыл бұрын

BEN YO what did you do?

@benyo4652

7 жыл бұрын

I'm stuck with whats done but in the future, I'm gonna take your concept and try to implement it into my car. thx

This is amazing thank you!!!!

Thank you Terry for this video! RIP buddy.

@MatthewWilliams-ec9pb

6 жыл бұрын

Nelson Sin did he pass away or something , I hope not 😥

@EduardoKicks

5 жыл бұрын

Yeah what happened

RIP Terry, thank you for this! I just did this to my 2015 sport and wanted to share a few things, that may hopefully, help others. First, it isn't necessary to de-solder the needed connectors except for the H (video cable) connector (which is very hard to remove, just like Terry mentioned), just take a dremel and cut the pins off flush with the board, there is more than enough of the pins left to solder on wires. Also, as far as the H-connector goes, my donor radio came with a cable that was too short to make it work. I went to the salvage and went out and looked at one of the junk cars, the cable that plugs into the back of the radio for the video connector (imid display) has the same end on the harness that plugs into the upper imid display. So, if you are able to get them to cut the harness, you can find that connector in two places, if needed. Second, all microphone cables are not created equal for this application. I had a strong suspicion that I was unable to get the H-Cable to work due to poor shielding on the microphone cable. I tried four cables before my suspicion was validated. So, I can save you some money, time, and headache. I ended up getting the screen to work using a GLS audio mic patch cord from Amazon, ASIN: B003JJQMD8; this may be the cable Terry used if you try to read the writing in his video. On the first three cables, the screen would either be all white or would flicker and sometimes show an image. Lastly, I was able to bend the mounting brackets from the donor radio to make the mounting bracket in the trunk. I put a rivnut in an existing hole on one side and used a coupling nut attached to a screw that was sticking through the package panel from above. This was a lot of work, mostly because of the trouble I had with the microphone cable. I'm still glad I did it, I love having carplay and better sounding hands-free calling. I used the SWI-CP5 to retain my steering wheel controls, I did have trouble getting it to program. Everything worked, except it would not answer calls from the steering wheel controls. I contacted PAC's customer support, which was phenomenal, but we still couldn't get it to work. Turns out my Kenwood unit dmx907s needed a firmware update, that fixed the issue.

@infotime

4 жыл бұрын

Are you saying that you can get the female H connector from a salvage i-Mid display?

@joshsmith0314

4 жыл бұрын

@@infotime I would assume you can. I got the male connector.

@almodz_3335

3 жыл бұрын

Hey Josh great video is there anyway I can purchase the wires from you can you make me a set let me know thank you very much I do have a donor radio I have a 2017 Honda accord.

@Hssengship

3 жыл бұрын

I have a donor JAE MX48 twinaxial donor plug, but the attached original twinaxial used by Honda is too short to solder, so I will need to disassemble the male plug to solder it. Since it’s propriety, and JAE doesn’t sell it, has anyone figured out how to open it? Very good take on posting that all microphone cables are not equal! I’m planning to use RG-108 since it’s an RF cable and should have more than enough isolation and speed capability.

@joshsmith0314

3 жыл бұрын

​@@Hssengship I actually ran into the issue of the cable on the male plug being too short, after multiple cable trials. You can cut it along the narrow, long side (with a dremel cutting wheel) and pry it open to get the board out and friction seems to hold it in place once it's reassembled and placed in the plug. Or, it looks like mouser might have it under part # 656-MX48002HQ6R200

Oh my God... SOMEONE ACTUALLY DID IT!!!

Nice job Terry. My buried dash set up with the Pioneer AVH-4200 has been working great. Now I think I'm going to have to follow your lead and put my factory head unit in the trunk.

@fourmoshers

7 жыл бұрын

Awesome. Let me know if you run into any hurdles. Happy to help.

@2245894

6 жыл бұрын

Hey man I need some help or just confirmation I have this wiring down

@scorpio2414

3 жыл бұрын

Hey Jason was wondering which aftermarket harness you use for radio

@Max_Thunder

3 жыл бұрын

@@scorpio2414 I made my own following Terry's instructions then i ended up buying one from a guy named Broli on ebay it was super high quality. I don't have the car any longer but still have the harness. If you interested in it I can send it to you. Let me know.

@scorpio2414

3 жыл бұрын

@@Max_Thunder yes sir I am

omg this looks so amazingly explained yet when i look at the bigger picture of it all of installing all of this, damn its intimidating, im not a tech, electrical guy at all. im just terrified of missing up using the wrong cable or w.e but frig i want better sound and carplay

We'll miss you in the DA forums. Last time we spoke was back on July. RiP

@maddproff

5 жыл бұрын

What do you mean R.IP?

@Bacnow

5 жыл бұрын

maddproff - Unfortunately, the video creator passed away.

@maddproff

5 жыл бұрын

@@Bacnow oh man RIP.Sounds like a really nice fellow.

@Bacnow

5 жыл бұрын

maddproff - I didn’t know him personally, but he does seem like a cool guy. I found out about his untimely demise by reading a comment that his wife left on one of his videos

Good stuff

Super informative. A lot better than majority youtube videos. Could you not fit the headhunt in the glovebox though?

@fourmoshers

7 жыл бұрын

J Stenberg Thanks! Nope it's way too big for the glove box. And even it if could fit, I would still have had to extend the cables because the factory harness won't reach the glove box. So if I had to do the soldering, I might as well put it somewhere out of the way where it's not taking away useful space.

Can you still adjust the brightness on the top screen?

Does the backup camera work without face plate on factory radio hook up onto factory circuit board? I'm doing the same and just buried into dash. You still can control everything with steering wheel controls right?

This video is PHENOMENAL... I do however have a few questions: Is this the same procedure if you have the other version of the OEM head unit? (the one with the touch-screen) And, does anyone offer a PnP replacement for the OEM head unit, or is this the only way to do this? Lastly, if we rear-mount the OEM deck (to retain functionality) can we then wire up ANY aftermarket head-unit (single or double din)?

very very help tanks

Quick question I have 17 accord sport which aftermarket harness you use for radio

By the way i too have a kenwood receiver the excelon 774..and im still figuring out what to do..I guess i need to give ur guy on ebay a shout to see about those connectors is that right?

I took my 2016 honda accord sport to a stereo shop and they installed a brand new pioneer avic-7200nex but I'm really disappointed because now my top ( stock ) monitor doesn't even turn on and I don't know what to do to make it work, is there any way I can make it work because what's the point on having that big screen if it doesn't even work, they said there is no hardness or anything they can do to fix it and I want them to fix it if there is a solution to my problem, I would really appreciate if you can give me more information thanks.

Hi Terry, By any chance do/would you make this harness for a fee? I can supply the parts and pay for all shipping.

Did you have to purchase a module to set up carplay stereo

how much would charge to make me a t hardness for my 2015 honda accord touring with side mirror camera

Do you make these wire harnesses?

Sorry sent to quick, I meant do you make them for sale?

for the donor head can it just be any type of head or does it need to be a honda accord 9th gen donor head, im very confused

Terry u should make a bunches of them and sell it on eBay..

@Oneinamillion6

4 жыл бұрын

Tran Kali he passed away

@Will-oj3un

4 жыл бұрын

@@Oneinamillion6 How do you know that?

@Oneinamillion6

4 жыл бұрын

Will his wife left a comment about it

how much would you charge to make this cable for me

I did buy a junk radio albeit without the wires cut from the back..so what I'm trying to grasp is then what do I use this junk radio for? The plugs that are attached to it..I guess it would be the male plugs..bare with me here please..soon as I understand what it is I need to do then I'll be fine..but I do have jus a couple ?'s..and those would be..so I have my radio that's currently in the vehicle ..and I'm gonna route that to the trunk ..so my aftermarket unit has to tie in to my wiring from the car..so what is the best way to do that..would u jus run all new wiring cause I'm doing a complete system components in the front for the tweeters to be put in the sail panels and then coaxial speakers in the rear with an amp and mayb a sub..so should I run new wiring for the after market receiver and then tie in to my existing wiring or have I got this alll wrong..jus point me in the right direction because ur the only one that has done what I'd like to do..so let me hear how u would do it..if u have the time..thx I appreciate all so far

@fourmoshers

7 жыл бұрын

Great questions. I realize now that I forgot to show the other harness that I had made about a year ago. It's been in the car so long that I had forgot about it. That harness ties in the aftermarket head unit, steering wheel control and factory head unit by connecting the vehicle male 24 pin main connector to all three. So I have two harnesses only because I did this in two steps. If you're going to do it in one step, a single harness will work. For your aftermarket head unit, the only thing it needs from the vehicle is Constant 12V, ACC 12V and Ground. It will get SWC from your Steering Wheel Controller. Your Steering Wheel Controller also needs Constant 12V, ACC 12V and Ground. Plus it needs A22 from the main 24 pin main. It's a pink wire that is SWC Vol +/- Channel +/-. And it needs C9 which is a light blue wire from the C harness which is the HFL wire. I know this might sound complicated but it's pretty straight forward. I HIGHLY recommend the you go on driveaccord.net and look me up. TMVB is my user name. You can find my thread that has the wiring diagram. I really recommend you go there and download the wiring diagram before you dig in. It will make this a lot easier.

This is awesome Terry. One question. If I already connected my aftermarket radio to the existing plugs (via a harness) that were connected to the stock radio, where will I be able to plug the stock radio back into? Not sure how you have them available in your video. What is you after market radio harness connected to?

@richardvedvik979

6 жыл бұрын

Michael Bank the stock head unit harness gets split so both radios are powered. Broly1000 makes this harness. Signals are routed to the appropriate head units from this wye-adapter.

@luissalas4652

6 жыл бұрын

Richard Vedvik , any idea where I can find that y-adapter for my 2016 sport, please. I've searched but no luck. Thanks.

@richardvedvik979

6 жыл бұрын

Luis Salas the seller of the harness doesn't publicize often.

@luissalas4652

6 жыл бұрын

Thanks, I'll try searching

Hi Terry, I have an 2015 honda accord LX, GCC. I don't have a backup camera or Bluetooth in my car. The factory sterio don't have the provision for this connectivity (GCC speck's). The question is, if I get an OEM cd player from the us market, whether it supports rear view camera? And a Bluetooth connectivity?? Will be thankful for replies.

@fourmoshers

6 жыл бұрын

I am sorry but Terry passed away in August

@richardvedvik979

6 жыл бұрын

The US spec head units have built in bluetooth and all have a rear camera connection.

Has anyone successfully figured out how to open the JAE MX48 twinaxial cable plug (connector plug H)? Microphone wire did not work since the imid display video is “very noisy”, so I’m going to use RG-108 which works at 10mhz and has much higher isolation, required for the three view backup camera in the 2017 Accord Sport.

I purchased the exact radio just as you said to but what I failed to do was make sure the female connectors were still attached to it..so my question is what or how do i save face now or what other option do i have to obtain those connectors..

@fourmoshers

7 жыл бұрын

I'd really like to help you out, but I don't understand your question.

Sir , i have 2014 all new accord and i will to install kenwood double din 9187ws .... how to make the upside display, can work normally

@holahop13

5 жыл бұрын

Can yo give me explanation how to install it? Thx before

fantastic video. how has this system worked since you installed?

@fourmoshers

7 жыл бұрын

Thanks. It's performed flawlessly. Very happy with how it turned out and how it's performing.

Would way work with I data link mistro

Where can I get that wire?

I have extended units before but not in a dual screen. My question is how did you get the steering wheel controls to work when the factory radio is still hooked up? This doesn't interfere with the aftermarket, or the controls for the info screen? Nice vids man

@fourmoshers

6 жыл бұрын

Sorry to tell you, my husband that made the videos passed away unexpectedly

@amberswain3741

6 жыл бұрын

Terry Mosher o wow I'm so sorry. May god bless you, your family and he is looking over you and your family. My condolences

@richardvedvik979

6 жыл бұрын

Terry Mosher , I am saddened to hear, he will be missed. My condolences to you and your family. I assisted Terry in these modifications and would be happy to answer these questions, if you don't mind.

@TurboV8boi

Жыл бұрын

@@fourmoshers I just want you to know that I think about your husband every now and then. Very random for me, but it's odd how something small like this can stick with you.

RIP terry

Can you help me and show me how to add the right side camera and install it to my 2017 accord sport . Plz thank you.

@fourmoshers

7 жыл бұрын

I have no idea how to add Lane Watch. But I suspect it would be difficult. People think that the Honda uses one wiring harness for all trim levels and if you want a feature from a higher trim (Lane Watch, heated seats, etc) that you can just buy the component and plug it in. The reality is Honda makes wiring harnesses unique to each trim level. So there are no connectors on a Sport in the right door ready to plug in a Lane Watch mirror. I'm sure it can be done, but solving the wiring harness will be the biggest hurdle.

Im wanting to exactly what you did..but how do I get those connectors now..do i look at purchasing them through honda or are they jus common connectors..cause i thought you said honda does some specific things as far as connectors to the stock radio

@fourmoshers

7 жыл бұрын

The plugs Honda uses are not widely available. I'm in contact with someone who is attempting to source both the male and female plugs but that's still a work in progress. If you buy a junk radio though, there is no need to worry about it because the junk radio will give you all the connectors you need.

@bivnguyen

7 жыл бұрын

I think the issue is he/she bought a junk radio that did not come with the old wires cut/male connectors still attached. That's what is also preventing me from using your solution since I can't find one either. If your contact pulls through, please let us know!

@fourmoshers

7 жыл бұрын

Ahh - now I get what he was trying to say. He was saying female connectors when he meant male - that was throwing me off. Haven't heard from the couple of guys that are pursuing sourcing the connectors. But even if they do, my opinion is buying the male connectors isn't going to be useful because you'll have to figure out how to populate them with pins and wires. I would reach out to the eBay sellers that are offering used head units and ask them if they have the males connectors with wire pigtails. I know of at least one person that was successful in getting the male connectors that way. BTW my eBay seller was nav4pro and he was easy to deal with. I'd recommend reaching out to him/her and ask if they have the male connectors for sale.

what do i need to make my own harness as i dont want to pay $300-400..but i watched ur video and i made a mistake in that i bought a radio for the wires and i didnt think about the wires being cut off so i suppose i am stuck with an extra radio now..So Terry what are my options now i mean how to get all the female connectors then so i can build my own harness.Any info will be greatly appreciated and if i can email you or you email me reply back and let me kno..thx .

@fourmoshers

7 жыл бұрын

I'm not following what you mean. My video shows step-by-step how to harvest the female connectors and build your harness. The only thing I don't show is the other harness I built that ties in the Steering Wheel Control and power to the aftermarket HU.

Can anyone tell me what color wire to tap into the climate control for the illumination wire to the new stereo?

@MrBroly10000

6 жыл бұрын

Matt Pesh the wire you need is gray in color. It sits in the middle of the climate controls connector next to a blank pin.

Is there a way to make it work with the top screen

@Castigo423

5 жыл бұрын

www.navtool.com

Do you sell those harnesses?

@fourmoshers

7 жыл бұрын

TheEvolution2649 No, not really interested in selling them. One of the reasons I made this step-by-step video is to give people the confidence to do it themselves. Besides, you have to tie in your own aftermarket head unit and steering wheel control harnesses (which I had done previously but don't show in the video).

Instead of buying a donor radio, can't you just clip the original male ends and extend those to the radio?

@rjk368

4 жыл бұрын

Yes; I think the point of doing the extension cable is so that it's easy to reinstall and revert to the factory head unit if necessary.

Quick! Get a donor head unit before they run out!

I really don't see how a donor unit is necessary if you just cut the original male connectors and extend with wire to then reattach the male ends.

Finding a donor with cable attached is impossible - I’ve been checking for months - the don’t sell the connectors

@MrBroly10000

6 жыл бұрын

Larry Benigno Try this kit, some people are having trouble with video signal degradation and yhe imid screen cutting out. www.ebay.com/itm/162423137547

@richardvedvik979

5 жыл бұрын

I've sourced a few from salvage cars over the years. I've also asked the sellers if they still had the car and could snip the plugs, some said yes.

I want to bye one

instagram.com/p/BV7YWOWD0TSWVy2GXI0qbb8BDA3-VcvMKjBIzY0/ that's another video I took also.

@swavey83

7 жыл бұрын

Kenroy Harris Requested to follow you. Swavey83. Would like to know how you did yours since I'm about to do the same with a Joying head unit. Have you bypassed the factory amp by chance?

Make a harness I’ll pay

What the hell

This video is gold!... Thanks! I just ordered all cables and donor radio to put my factory radio in the trunk. You laid out the blueprint perfectly.

@2245894

6 жыл бұрын

Luis Salas hey man I got this all figured out.. I think. Except for the illumination from the new deck to the climate control. My question is what wire does he tap for illumination. Is it the orange wire on the climate control harness?

@luissalas4652

6 жыл бұрын

Matt Pesh I believe the D connector should control the illumination. I haven't hooked mine up yet.

@2245894

6 жыл бұрын

Go to his blog in the first video. Some guy says that pretty much any wire to the climate control will work for illumination. And he uses the Gray wire in the middle of the climate control which he says works fine.

@luissalas4652

6 жыл бұрын

I'll check it out, thanks. I'm looking for the y connector , do you know where I could find it?....

@2245894

6 жыл бұрын

Like I Said man it's in one of terrys blogs in his fist video about this