Awesome efficient diag process. Can't beat a test light and wiggle check for tracing those shorts to ground! Sad to see the PCM and injector Parts Cannon before you got there and fixed it NO PARTS REQUIRED :)

@advancedleveldiagnostics

6 ай бұрын

Thank you for watching!

If the Ford door chime was ment to get hour attention they should receive an award. I respect your decision at the beginning "Not" to go down the rabbit hole of following the other shops work😊

@advancedleveldiagnostics

6 ай бұрын

Lol I agree it can make you go crazy!

He talks fast as he works fast. On most other channels, this would be a 1 hour+ video. Great work!

@advancedleveldiagnostics

6 ай бұрын

Thanks 👍

Saved a lot of time by understanding the short to ground could be proven by disconnecting the computer. Perfect pivotal test, light stays on its the circuit, goes off and we’re looking at the computer.

I do mobile diagnostics and repair as well. I hope I can become as clever as you and Ivan. Love your videos. I always forget the test light, wiggle check for shorts. Thanks for bringing it back to memory. 🎉🎉

@advancedleveldiagnostics

6 ай бұрын

Thanks 👍

THAT WAS SOME TOP GRADE DIAGNOSTICS ,,,,,,,,,,,,,,,,, .

Dig your channel, you seem smart and down to earth Hope it gets real popular for you man. Take care.

@advancedleveldiagnostics

6 ай бұрын

Thanks!

Come on people lets give this guy subs..he deserves more subscribers 👏..even Phad is watching him😊..great diag sir keep posting informative vidz.cheers

@advancedleveldiagnostics

6 ай бұрын

Really appreciate it, Thanks!

Please keep the videos coming. I’ve been a tech for over 20 years. Chasing down and diagnosing electrical issues is what I love to do. Just watching you guys use all of the special tools to narrow down and identify the problems are truly amazing. I always told my customers that normally a wire issue can be found quickly or it will take a while. Good work guys.

Dude I really appreciate for taking your time to show us how to diagnostic and patient keep the content going bro

@advancedleveldiagnostics

6 ай бұрын

Thanks for watching!

Classic Electrical Diagnostics. Something a general mechanic, programmer or key guy can not do, just pointing that out. Good job 👍

Great diagnosis and fix ! WHAT type of story does the other shop tell the customer after the PCM and injectors and it does the exact SAME thing ?

Well done! A good argument against an overlay...the other wire may have created a problem in the future. Obviously more time in locating the short but results in a complete job. Keep the diags coming my friend!

@advancedleveldiagnostics

6 ай бұрын

Good point! Thanks for watching!

Glad you found the problem (and others too!) So many are quick to run a wire not realizing there could be collateral damage in the area.

@advancedleveldiagnostics

6 ай бұрын

I agree, I try not to run overlays unless I have no other option.

Great find, but caution with the open intake! Very inconvenient place to happen.

@advancedleveldiagnostics

6 ай бұрын

Yes that was a mistake not to cover the intake. Thanks for watching!

You are the man....One of the best diagnostic techs i've seen........Respect

@advancedleveldiagnostics

5 ай бұрын

Thank you!

Awesome to see the steps and thought process on diagnosing that shorted ground wire 👌 thanks for videos

@advancedleveldiagnostics

6 ай бұрын

Thanks for watching!

nice diag and repair following the process.

@advancedleveldiagnostics

6 ай бұрын

Thanks 👍

Thanks for taking the time to share this,. We'll done. We should chat some time about the u tube stuff.

I have been watching your channel for a while. Of course I’m subscribed. The wife must b smiling on u. No more raggedy Suburban. Every Scan Tool, Computer, All Data subscription and Identifix that money can buy for our Tech. Cost? Don’t sweat it, u can’t take it with u. And a proper truck to haul all the goodies. Good show!!!!! I watch and enjoy all the vids. This one was fun. I would have taken that bolt stud out and thrown it as far as I could. Replace with a regular bolt. I bet that shop loves u.

@advancedleveldiagnostics

6 ай бұрын

Thank you so much!

The more and clearer the WIRING DIAGRAMS you show us, the more interesting is the video. Waiting more videos from you 😊😊😊

Experience diagnosis master mui bueno. Felis navida master

@advancedleveldiagnostics

6 ай бұрын

Thanks!

Excellent video

Impressive works at 3,000 mph 😊

Beautiful diagnosis!! Thank you for sharing it.

Great educational vid!

Great work! It was really nice to watch you find the short thank you very much

@advancedleveldiagnostics

6 ай бұрын

Glad you enjoyed it!

Impressive as always.

Superb Diag! Thank you!

Really love this channel keep the educational videos coming 👊🏻👍🏻

@advancedleveldiagnostics

6 ай бұрын

Thanks!

@ThunderbirdRocket

6 ай бұрын

I’m with you , I second that !

Excellent work, thanks for sharing I’ve added you to my subs channels. Will show my students this one

@advancedleveldiagnostics

6 ай бұрын

Thank you so much!

Awesome informative video. Thanks for sharing.

@advancedleveldiagnostics

6 ай бұрын

Thanks for watching!

Great Video!

Great video! Awesome diag, w/repair video!

@advancedleveldiagnostics

6 ай бұрын

Thanks! 👍

Your diags are great to watch,and your truck setup is sweet

@advancedleveldiagnostics

5 ай бұрын

Thanks 👍

Awesome approach and thought process as IVAN, say can not beat the test light and wiggle test and that is true as always thanks for sharing.

@advancedleveldiagnostics

6 ай бұрын

Thanks for watching!

Nice job on fixing the problem. I watch these videos to learn from . Saves me a lot of money .. seems like i heard check points of contact on wiring harness..... i watched a fellow take a pair of wires and twist them up in a drill to be used as a splice. Repair on a can networks. C can i think . He just spliced in the wires in the harness . Saved a lot of money . I appreciate these videos thanks

@advancedleveldiagnostics

6 ай бұрын

Thanks for watching!

great stuff!!!!

@advancedleveldiagnostics

6 ай бұрын

Thanks!

Great job amigo

Great content

Good job great video.

@advancedleveldiagnostics

6 ай бұрын

Thank you!

x-3 you did a great job #1 video again..👍

@advancedleveldiagnostics

6 ай бұрын

Thanks!

Really great job. Well done. Just an advice if use table like the on used for the patient bed in hospital it's very helpful for arranging tools and labtop and other things.

@advancedleveldiagnostics

6 ай бұрын

Great idea! I have a Milwaukee packout with the table top, I'm always too lazy to take it out😂

Good job master

Awesome 👌

Ford couldn't put the wire shielding where it was needed. Typical Nice work🙂👍

@advancedleveldiagnostics

6 ай бұрын

Thanks for watching!

You are the man

very good job friend 👍👍👌👌

Awesome hands on video!! Hitting that Subscribe button!

@advancedleveldiagnostics

2 ай бұрын

Thank you!

very nice 🎉

@advancedleveldiagnostics

6 ай бұрын

Thanks!

I wonder if that valve cover bolt with stud was in the incorrect location or if there used to be a harness clip attached to it. Great Diag!!!!

@advancedleveldiagnostics

6 ай бұрын

Great point, I didn't think of that! Thanks for watching!

Bless Do you like the Topdon diagnostic computer? Excellent video. Thanks 😊

@advancedleveldiagnostics

6 ай бұрын

Yes I do! I think it does a fantastic job.

Pretty simple test for short to ground

Great video! What test lead/adapter kit is that? Its nice!

@advancedleveldiagnostics

6 ай бұрын

Thank you! It's from AES wave. www.aeswave.com/uTest-Advanced-Terminal-Test-Kit-p9748.html

Get this man a headlamp. He does an amazing job but he could kill this program if he wasn’t hindered with having to hold his light.

I’d be curious if that yellow wire was the cause of the injector circuit open code as well. Also did you tell him he needs a purge valve for the classic cannot bleed fuel tank vacuum lol

@advancedleveldiagnostics

6 ай бұрын

The injector code was because #6 injector was unplugged. I think they saw the car running rich because of the timing so they assumed it was an injector issue. As for the bleed down code I completely forgot about it, until now😂

Great diag, first thing, what electrical test lead kit do you have? And having to hold that little flashlight all the time in one hand would drive me nuts, i definitley recommend the rechargeable LED headband lights for this work.

@advancedleveldiagnostics

6 ай бұрын

Aeswave Test lead kit www.aeswave.com/uTest-Advanced-Terminal-Test-Kit-p9748.html

wow so the customer had to pay for new injectors and a computer that were not needed? How much did that cost? great video. thanks.

@advancedleveldiagnostics

6 ай бұрын

I don't know if the customer had to pay or not, it was in a different shop. It's also possible that it needed injectors and they built in this problem when they took it apart.

Great video. Did you make that light bulb with test leads yourself or did you purchase it somewhere?

@advancedleveldiagnostics

4 ай бұрын

I made this one, but @joesautoelectric just made one. www.joesautoelectric.net/store/p22/Multi-Bulb_Magnetic_Test_Light.html#/

@briansohncompaq

4 ай бұрын

thank you!@@advancedleveldiagnostics

nioce

👍

Top gun, how many hrs to correct the problems

@advancedleveldiagnostics

6 ай бұрын

A little under 3 hours.

smart-smart-smart fast-fast-fast

@advancedleveldiagnostics

6 ай бұрын

Thanks for watching!

@ThunderbirdRocket

6 ай бұрын

Beast !

​@advancedleveldiagnostics what test lead set is that??

@advancedleveldiagnostics

6 ай бұрын

www.aeswave.com/uTest-Advanced-Terminal-Test-Kit-p9748.html

Like a shark that smells blood ! 🦈

How much do you charge for a repair like this one? To justify all the expensive equipment you have invested in. Would $700 be overpriced?

@advancedleveldiagnostics

6 ай бұрын

I don't like giving numbers on KZread, but that does not seem overpriced.

that's a factory or even a design defect.

Hey what is the best way to reach you at? Email?

@advancedleveldiagnostics

2 ай бұрын

Yes

@waqasazmat81

2 ай бұрын

@@advancedleveldiagnostics what is the email?

@advancedleveldiagnostics

2 ай бұрын

advancedleveldiagnostics@gmail.com