Shop this Roush Cold Air Intake: amtrucks.at/2zwjrt4 Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg

Great job on the details you know how many videos out there that show you what to do , but don’t really show you what to do!!

@americantrucks

2 жыл бұрын

We appreciate that! Thanks for watching! -Zach

Would love some more videos like this

You don't blow any air filter out with compressed air unless you're wanting to open up the media and reduce its filtering ability.

AmericanTrucksFord did you have to have a extension for the intake sensor plug?

any suggestion for new F150 V8 5.0 air intake exhaust .... tnx

I have a 2017 Expedition w/ 3.5 TT ecoboost. Is it safe to assume this will work with my ride?

Awesome

@americantrucks

6 ай бұрын

Thanks for watching!

I replaced my stock cool air intake last week with this cool air intake. This week my check engine light came on. I determined it was the pcv valve and hose. Is the cool air intake the cause of the pcv valve going bad? Could someone please let me know? Thanks!

Is this the same install on a 2018 3.5 Lariat?

Are you removing the Turbo silencers or keeping them in?

@remingtonkevin65

2 ай бұрын

I removed mine. Now I have a pcv valve going bad. Could this air intake be the cause of it?

Would a drop in KN filter let the engine breathe as good ad this?

@americantrucks

3 жыл бұрын

A drop-in filter from K&N wouldn't allow your engine to breathe as open as a full kit like this Roush option show. It *would* absolutely breathe better than your stock paper filter though! Drop-ins are a really nice budget-friendly option if you aren't looking to spend a ton of money, or aren't looking at getting your hands dirty with a more involved installation. -Zach

What happens when the seal gets old... hot engine air...??

OK, just got mine. It had a plug extender and a bracket. Where does the bracket go?

@BenjaminSandness

2 жыл бұрын

This was only needed for newer range of model years to attach harness to. Roush instructions are more complete.

Will this work on and benefit my Non-ecoboost 3.5L?

@americantrucks

3 жыл бұрын

This specific cold air intake *will not* fit on your non-eco 3.5L V6. You should check into the following link! K&N makes a really solid intake that will fit! -Zach www.americantrucks.com/kn-63-aircharger-1516v6.html

@weather991

2 жыл бұрын

Will this fit on the 2.7 EcoBoost

The fixation of the gasket is so so ( cut to short )

@jerrystalzer1350

7 ай бұрын

I agree, cut too short, should’ve cut longer tucked it back inside the hollow seal removed the one pin, and pushed through both of them.

I didnt get any weather stripping at all w mine

@americantrucks

7 ай бұрын

It should have come with a seal. Give us a call, we can help with this!! --> 1-888-706-1096

10 horsepower for over $400 no thanks

Excludes raptor....Thanks.

@americantrucks

3 жыл бұрын

www.americantrucks.com/roush-performance-cai-2017-raptor.html -Justin

Excludes Raptor but has it on his '17? Wut.

@americantrucks

3 жыл бұрын

Correct. While the intakes (Raptor vs Non-Raptor Ecoboost) are practically identical we have a separate 'Raptor specific' part number on our site. -Justin

Just a noise maker, the stock units are pretty stout

@datapro007

3 жыл бұрын

It's hard to justify $410+ for a make-work project.