2014 Mercedes Benz cls 550 here’s why your timing chain slaps on start up.

Автокөліктер мен көлік құралдары

In this short video I will show you why your timing chain on your Mercedes with 276 or 278 engine makes noise on start up and what you need to have replaced before engine damage occurs.

Пікірлер: 46

  • @dwighthoram
    @dwighthoram Жыл бұрын

    I have a sound from my 2012 CLS550. Can I send it to you to help me figure out what's going on? Thanks in advance.

  • @bobtech1013

    @bobtech1013

    Жыл бұрын

    If you are in Toronto Ontario sure I can take a look you can find contact info on malibumotors.ca on certain 278 and 276 you will also need to install non return valves

  • @scottp6761

    @scottp6761

    7 ай бұрын

    ​@bobtech1013 none return valves are the check valves right? Also do they cam position or plate leak onto wiring or harness ? This is fixed by pulling timing cover and everything correct?

  • @bobtech1013

    @bobtech1013

    6 ай бұрын

    @@scottp6761 the o rings for the camshaft actuators do leak you can replace the o rings for them also make sure the pintle on the solenoid is free and moving in and out easily also the top section of the timing cover can be removed and re siliconed

  • @bobtech1013

    @bobtech1013

    6 ай бұрын

    @@scottp6761 yes the non return valve is a oil check valve the is pressed into the head it sits behind the timing chain tensioner it feeds oil to it

  • @scottp6761

    @scottp6761

    6 ай бұрын

    @bobtech1013 one day i will do those chech valves and chain and guides all at once. Until then. Keep driving her

  • @scottp6761
    @scottp6761 Жыл бұрын

    I have a slight chatter on start up and it disappears after 3 seconds. 2014 cls 550 with 25k miles only. Im changing oil to a higher viscosity 5w40-50 and adding ester oil additive. But is it a ticking time bomb? It doesnt do it on cold starts. It does it after its hot. I turn car off and let it sit for 30 min to 1 hour and then it will make the noise. It almost sounds like valve chatter or something or lifter. But idk

  • @scottp6761

    @scottp6761

    Жыл бұрын

    My theory was no oil pressure and then it is fine. Engine runs great otherwise. I'm concerned but not freaking out "yet"

  • @marquisstearn3253

    @marquisstearn3253

    11 ай бұрын

    You man need new tensioners and to install check valves. There is documentation out there on the topic

  • @scottp6761

    @scottp6761

    11 ай бұрын

    @@marquisstearn3253 I concur,i did change the oil to 15W50 and the noise is mostly gone but I'm going To Do the tensioner's and check valves as soon as possible I am Taking care of a transmission problem to and changing the spark plugs,engine mounts,airfilters,and replacing possibly a valve body in this car. Already.i am not very happy. , it only has 30K miles.

  • @scottp6761

    @scottp6761

    11 ай бұрын

    @@marquisstearn3253 I own a bmw 535D prior to this and it was bullet proof. Think im going back to bmw sooner than later. This shit aint worth it

  • @legendaryx2089

    @legendaryx2089

    9 ай бұрын

    @@scottp6761seems like it was poorly maintained mine has 132k miles and is in perfect condition

  • @scottp6761
    @scottp67617 ай бұрын

    Anybody know the amount of labor it is to get in there and do this job?

  • @bobtech1013

    @bobtech1013

    7 ай бұрын

    For the complete job it usually calls for 18-22h for both banks

  • @scottp6761

    @scottp6761

    7 ай бұрын

    @@bobtech1013 wow. Might as well pull engine. Its less labor

Келесі