4 years later and still hardly any aftermarket tail light for this car. I’ve been looking for some for my car for over a year now and have finally given up and I’ll be ordering these lights 😂

i was looking for the positive and negative colors for the cables, thank you so much!!!

Thanks for the video. I havent seen hatch lights needing trim removed first before

Great video. It certainly helped me to know where to prise things when I was replacing a broken taillight. Finished it all in 60 mins taking my time and being careful. Your instructions were very helpful. Cheers mate from Sydney, Australia

This really helped me with replacing my smashed hatch tail-light... thank you!

@GregPettus

3 жыл бұрын

Sweet!

They look sweet 😎 Thanks, now I'm gonna go buy some for mine!

@GregPettus

5 жыл бұрын

Do it!!!

Thanks for the video. I don't have a Mazda 3 but I have the 6 and kind of makes me want to get the GT version of my tail lights

@GregPettus

5 жыл бұрын

Do it!!! They also have some sick after market ones for the 6.

Seeing him install these, i will be happy just installing the round led tail lights and leave out the lights on the actual liftgate on my mazda3

@BoogieDownProduction

5 жыл бұрын

It would be incomplete without that full strip. I'd do both personally doesn't look hard to do

I may not own a mazda but, Those look really nice!

@GregPettus

5 жыл бұрын

Thanks man!

Awesome video, helped me to get most of the way there, but I hit a wall wiring, the inner tail lamps, has anyone managed to find the wire harness for these? Or some other sort of direct wiring?

Not sure if I should get one from Ali Express but I was always wondering how to remove the tail lights. Amazing video. Great work.

@GregPettus

5 жыл бұрын

Thanks! If they fit. I would say do it!

Looks amazing. Does anyone know whether or not the tail lights from a 2017 model be compatible with a 2015 model? I've found some cheaper used prices from a 2017 model.

Nice video. I have been wanting to do this for a while but just havent been able to find a decently priced set of the GT taillights.

@GregPettus

5 жыл бұрын

Yeah so expensive. Bought mine used and it was still a lot

@osalcedoucmsae

5 жыл бұрын

Me too:/ they look so good, still looking to getting fogs hopefully soon

@TheAdventureAuto

5 жыл бұрын

@@osalcedoucmsae Fogs are so cheap to add. Under $100 which includes new fog stalk.

@gkassee37

5 жыл бұрын

Greg F. Pettus how much?

Hi there, am trying to remove tail light on Mazda3 sedan. Was able to remove all screw n clips except for the big white clip. Any idea how to remove that? Thanks

Hi there do you know what I need to remove to replace the rectangular hatch release button? Mine is acting up in the cold weather maybe due to condensation. thanks

Nice work, I swapped the outer (brake/turn signal lights) a while back and I never did the inner ones because I was worried they'd be a PITA, given that they require splicing. Thanks for the video on how to do that hatch lights! I think I still may just keep the outer ones without the inner ones because of the cost (and because the stubby line and circle is somewhat range rover-esque)

@ethanolson308

5 жыл бұрын

Alex Rojas Do you have any photos of what your setup looks like? I’m thinking of swapping mine out. My parents have the CX-9 and I like the solo ring look.

@Alex-zh1ec

4 жыл бұрын

@@ethanolson308 Sorry for the half a year late response haha. If you're still interested, this is what it looks like (but ignore the bottom reflectors bouncing the light back, of course) s.amsu.ng/eqGsjyyvSk5N imgur.com/a/gt3HmW2 Sorry for the potato quality pic; I just dropped my car off at the body shop and I think that's the only night-time picture I have with the lights

That corvette looks awesome!

@GregPettus

5 жыл бұрын

Haha i know right. And super fast too

@aheroforeternity

5 жыл бұрын

Yah make a video about that Chevy Corvette!

@GregPettus

5 жыл бұрын

aheroforeternity i am down if i get to drive it 😁😁😁

Hi! This is the stock tail lights for my car. Im wondering if how can I replace the bulbs/leds

Hey! How was the install in the inner taillights? I’m assuming the reverse light connector is there already. Do we have to purchase an extra connector for the led and then splice that like it’s shown in the vid?

@GregPettus

4 жыл бұрын

I believe so. The oem ones come with a plug but i dont know if not gt models have the connector

Link for tail lights?

I’m modding my Mazda 3, should be posting a video within a few months of it

Hi Greg, Nice video. Where did you bought your GT LED Tail Lights?

@GregPettus

5 жыл бұрын

I got them from another guy that was parting out his mazda. He got them from mazda swag. They are an oem parts dealer.

I have a sedan but so far this is the only account Im keeping up with because most of the 3s here are 2nd gen and I have a 2017 and you get straight to the point no bs! I was hoping to ask a lot questions so is there any social media to follow

@GregPettus

5 жыл бұрын

I have an instagram.com/gregfpettus/

@Greg F what are those bolts and screws called at 7:42 I accidentally broke now and lowkey kinda messed over because auto zone and o Riley’s doesn’t even know what it is called

@GregPettus

4 жыл бұрын

What time sorry? 7:42 is the end of the video

Congrats, buddy! They look awesome. Very detailed video too! LED Taillights, headlights, and fogs were the first thing I did when I got my 2017 T. (Totally worth it) By the way, when you switch to DRLs only, do they all turn on/stay on even when the car is turned off? ps. I was able to install AA/AC without any issues a few days ago thanks to your video, Nate P's video, and the M3R forum. (I got lucky and found the parts at a great price) Thanks for the vid!

@GregPettus

5 жыл бұрын

All the lights turn off with the car. Youre welcome! Glad i could help

@baileyschooler1816

5 жыл бұрын

Where did you find the LED housings for your hatchback? The only ones I could find were for sedans.

@GregPettus

5 жыл бұрын

bailey Schooler directly from the factory. Unfortunately...

im gonna get LEDs for my turning signal and brakes

I have a 2018 and i would want to do a lot of mods you have done. I'm interested in wrapping my interior. Would it be similar to how you disassembled yours or is it different? I also have a manual transmission. I know it's a little different with the ebrake

@GregPettus

5 жыл бұрын

I have a 2016. It is probably very similar. Probably has an extra plug for the E brake, but the modules should all pop out the same. just go slow just to make sure before just yanking on everything.

@joelhernandez393

5 жыл бұрын

@@GregPettus thanks for the reply!

Where can I get them from

So my Mazda 3 is a Mexico built, and the tail lights I found online with the LEDs are for Japan built Mazda 3s (specifically the part with the reverse light). Would it still work or is there a fitment/connection difference between the two?

@GregPettus

3 жыл бұрын

Might be slightly different

@revlun1

3 жыл бұрын

@@GregPettus Darn really wish I could install them, they look so nice! I dont wana run the risk of trying to install them and finding out they dont work. Thanks!

I know this is an old video, but did your new inner lamps come with the two wires? Did you buy the wiring separately? That’s the only part I’m stuck on. I ordered some and they had no wires attached.

@GregPettus

2 жыл бұрын

I bought them usedd..... sooo not sure! Mine already had them...

@Leonel-sp7cj

Жыл бұрын

Friend, did you manage to install them? I have the same question as you. I bought some and they came without cables and i dont know how they are conected if you help me i would appreciate it.

Hi, do you have the link for the tail lights purchasing?

@GregPettus

4 жыл бұрын

I just updated the link in the description.

does country of origin (japan made or mexico made) affect fitment, or just the connectors/clips?

@GregPettus

5 жыл бұрын

cortez1201 shouldnt. But not 100 percent sure

@Alex-zh1ec

5 жыл бұрын

As long as your car is for the North American market, it should be the same as this video. My 2016 iTouring Hatchback, which was made in Mexico, is exactly the same as Greg's Hatchback is in regards to the connectors, screws, trim pieces..etc.

Hey, so if I just decide to go with the outer, it's plug and play? I won't have to do any sort of wiring, it's a direct replace with the SAME exact harnesses?

@GregPettus

4 жыл бұрын

Yes

@ZiggyReviews

4 жыл бұрын

Greg F. Pettus May sound like a dumb question, but how does the LED illuminate in the outter taillight if it’s just using the same harness as the previous halogen one?

@GregPettus

4 жыл бұрын

@@ZiggyReviews same harness yes

Any sealant used before installing the tail light on?

@GregPettus

3 жыл бұрын

No

Friend i want those tail lights for my mazda 2014 hatchback do you think they ship to Puerto Rico from that mazdaswag page??

@GregPettus

2 жыл бұрын

Probably bc its still us mail.

@Leonel-sp7cj

2 жыл бұрын

@@GregPettus what is the parts number of those tail lights friend? I cantact with mazdaswag and they say these are aftermarket and they only sell oem parts.

You should invest in some LED bulbs for your indicators and reverse lights. It makes a massive Ive changed mine and it looks a lot better and much more modern. The indicators turn on and off instantly because there led and it looks much better. The reverse bulbs would just match your plate lights and DRLs.

@GregPettus

5 жыл бұрын

ooo I might replace some indicator lights. I have the LD reverse bulbs and love it! maybe I will do a video update on that one.

@7homas0wen

5 жыл бұрын

Greg F. Pettus I’d say go for it. Well worth the effort. Might need some resistors though.

:( I been having trouble finding mod parts for my 2017 still. Big sad.

@GregPettus

3 жыл бұрын

I am planning on getting a huge list of daily mod parts that people can have access to.

Where did you buy it? How much did you pay? Thank you!

@GregPettus

5 жыл бұрын

Bought it used from someone parting out. He bought it off Mazda Swag, a mazda dealer sight for 600. Hope that helps!

Is it safe to install them without resistors?

@GregPettus

4 жыл бұрын

should be safe. Havent had any issues without it

I thought it was just plug and play 😭 looks complicated to install. Im so noob

That's a lot of work for a mod that's seen by everyone other than you. Only when the brake is applied.

@GregPettus

2 жыл бұрын

Haha yeah but its the fun of putting it together.

i want a pair soooo bad, too expensive though :(

@GregPettus

5 жыл бұрын

Yeah had to get mine used to get then cheaper

I just wanna know where the hell i look for some of these. I checked on amazon, different parts of the internet, nothing. Please help lol

@GregPettus

2 жыл бұрын

Have to go to mazda oem parts websites and look for the GT model tail lights

@joshymcdaniel9233

2 жыл бұрын

@@GregPettus or call junk yards depending on side they got hit 1 may be good or both mite be good just call a butt load and keep checking

Do you know if you can do this to the front headlights?

@GregPettus

5 жыл бұрын

You mean retrofit gt headlights?

@danielgarcia9243

5 жыл бұрын

@@GregPettus yeah

@GregPettus

5 жыл бұрын

The cables are different if i am not mistaken. There is an aftermarket gt one that is plug and play.

@ImJustAudio

4 жыл бұрын

@@GregPettus Hi, I recently got a 2016 Mazda 3 Hatch Touring and I've been watching your videos for a little inspiration on what to add and change to my car. One of the main things I've been looking for are GT headlights. Do you know of any places I can get them? The only place I've seen so far is CarID. And when you say plug and play do you mean there's no rewiring or anything like that involved? Just swap them out?

@JulioArreaga

3 жыл бұрын

@@GregPettus I have a ‘17 2.5 Touring Hatchback, the headlights are halogens and I’d like to upgrade them. Not just the bulbs to LED ones, but the entire headlight assembly with something cool like the GT headlights. I haven’t had any luck finding aftermarket ones, can you link the ones that you mentioned are plug and play? And where do you go for aftermarket parts for your Mazda? I usually look at CorkSport. Thanks in advance!

What headlights do you have??

@GregPettus

4 жыл бұрын

Oem headlights

Anyone have issues when taking them off that bolts snapped? can the bolts just be replaced?

@GregPettus

4 жыл бұрын

Yeah i broke the plastic tab thats hard to remove. It can be replaced just have to look up the part no.

@GregPettus

4 жыл бұрын

Ooooo you mean the bolts on the lights?

@ryankennedy3114

4 жыл бұрын

Greg F. Pettus Yes lol, sounds like the whole piece has to be replaced and you can’t just buy the bolts.

does this work on 2018 mazda 3?

@GregPettus

4 жыл бұрын

Yes it should

@Harry-th9wl

4 жыл бұрын

@@GregPettus Thanks hopefully going to try this later!

The bigger ones are plug and play?

@GregPettus

5 жыл бұрын

Bigger ones?

@raulhuizarm.157

5 жыл бұрын

Sorry, ones that are at the sides. Lol.

@GregPettus

5 жыл бұрын

The leds on the outside are plug and play yes

@raulhuizarm.157

5 жыл бұрын

I got the SGT tail lights, where are the wires thay you conect from the inner lights?

Why u so hot??!

@GregPettus

5 жыл бұрын

I wish! Trying to be as swole as you!