I just replaced mine yesterday on a 2014 Jeep Patriot 147,800 miles. Used a dremmel, worked out great! Thanks for posting!

@blackshirtbuilds7316

7 күн бұрын

@@ggazzara1115 awesome! Glad it was helpful!

excelente! lo que andaba buscando ayer se me rompió el de mi Jeep 😞

I feel so confident right now!... Let's see in a couple of hours.

Ty you saved my butt with that part number

@blackshirtbuilds7316

5 ай бұрын

You’re welcome! I’m glad it helped

thank you...just put one into my 2014 compass it was brittle ! New one went in 1-2-3 no problem $36 with tax

@blackshirtbuilds7316

Жыл бұрын

Awesome! I’m glad I could help

Excelente video. Muchas gracias

Big help man

Thank you. It really helps me

@blackshirtbuilds7316

Жыл бұрын

You’re welcome! So glad to help

Was it overheating or did you just notice coolant leaking under the car? We have a 2013 with I believe the same problem but I just noticed coolant under the car. Coolant reservoir is still at correct level and I don’t see much evidence elsewhere of a leak besides underneath the cap assembly there

Take the whole bracket off to make the job much easier.

@blackshirtbuilds7316

6 ай бұрын

Thank you for the comment, however, I just prefer to have the bracket hold the part while I work on it.

What’s the name of that part

Did you have overheating in your car as a symptom? I have the exact same looking leak but im confused why the leak would overheat my jeep when there's plenty of coolant still in the system and reservoir. Its making me think that something else is broken and adding to the pressure of the system and it just happens that the coolant neck you replaced is where the pressure is releasing this excess coolant. If you tell me your jeep was overheating even with coolant from that small leak then I'll know the two are related. Really appreciate it. Definite 👍

@blackshirtbuilds7316

Жыл бұрын

It only had overheating issues because the coolant was low.

@aprilsanders7685

10 ай бұрын

If there is air getting into the coolant system it will over heat it needs to be properly sealed I have the same problem

How do you bleed these cars I’m confused is it the traditional way like wait for bubbles to stop on radiator cap? And when does radiator open is it when the thermostat on half of the speedometer ?

@blackshirtbuilds7316

Жыл бұрын

Yeah I top it off and run it a bit and just put the cap back on and top the reservoir to the correct level and after a few times driving it will bleed itself. The. Just keep an eye on the reservoir to make sure it stays at the proper level.

Do you have to drain the coolant before you replace the part? I'm about to do this myself.

@blackshirtbuilds7316

Жыл бұрын

No, not on mine. It had leaked down far enough that I lost no additional coolant. If yours isn’t leaking you’ll a little bit but I still wouldn’t drain it.

@gen8988

Жыл бұрын

@@blackshirtbuilds7316 thank you!

Has anyone tried this on a 2016 Jeep Patriot ?

Is there anyother way besides using a grinder to get that plactic clamp off the tubes? I dont have a grinder and need to replace mine today.

@blackshirtbuilds7316

11 ай бұрын

Yes, a small handsaw or something like that would work as well

How is it holding up? Mine is about to give up and I’m ordering this same brand right now

@blackshirtbuilds7316

8 ай бұрын

It has held up great with zero issues

@Drsilmi

8 ай бұрын

Brilliant, I got me one made of aluminum though ! Found it on ebay !

Where do you got this part?

@blackshirtbuilds7316

11 ай бұрын

Advance auto parts.

What this neck fit on my 2015 patriot?

@blackshirtbuilds7316

Жыл бұрын

I’m not sure. But I’d guess if your upper hose looks like that it probably would.

@silviamachado6879

8 ай бұрын

Did you try this ?

@susanmcgovern5122

8 ай бұрын

​@@silviamachado6879I'm about to right now.

Would that part work on a jeep patriot

@silviamachado6879

8 ай бұрын

I’m having the same issues on a Jeep Patriot 2016