2014 GMC Sierra - Silverado 1500 engine belts replacement. AC comp, vacuum pump and serpentine.
Тәжірибелік нұсқаулар және стиль
In this video I'm replacing the serpentine, AC compressor and vacuum pump belts. GMC recommends replace them each 100k miles. My truck has 140K and the AC compressor belt already failed although I learned later it was due to seized compressor. Anyway, this and easy and inexpensive maintenance I will not miss again.
LINKS
Some links in this section are "affiliate links", which means that if you click and buy something, I earn a small commission at no extra cost to you. Thank you for your support.
ACdelco serpentine belt: amzn.to/3vNUhm8
ACdelco vacuum pump belt: amzn.to/3IzauDs
ACdelco AC compressor belt: amzn.to/3CvZEuf
Heavy duty zip ties: amzn.to/3NoAdAr
OTHER VIDEOS
Check out my other videos
AC condenser replacement: • AC Condenser Replaceme...
Skid plates: • GMC Sierra - Silverado...
Control arms and ball joints replacement. • 2014 GMC Sierra - Chev...
Installing an auxiliary battery: • Installing Auxiliary B...
MUSIC
I use Artlist for all my music. If you are looking for a music provider for video production I highly recommend Artlist. Click this link to learn more: artlist.io/ButteWorks-1617610
SOCIAL MEDIA & CONTACT
KZread Channel:
/ butteworks
Instagram: / butteworks
Contact Info:
email: butteworks@gmail.com
Пікірлер: 75
Great video! Thanks for posting this. Was able to get all 3 belts replaced on my dad's 15 Sierra using some of the tips you showed here. For anyone wondering, you can do the vacuum pump belt from the topside too. You have to put the belt over the pump and get the zip tie on pretty much by feel, but it's not to hard to do. I had all 3 belts replaced in about 45 mins, and I had never done a stretch belt before. The old belts looked pretty good still even though they were 10 years old. He got quoted a crazy number by the stealership to do this. For anyone nervous about the stretch belts, don't be. Follow the steps in this video, and you'll have no issue.
@BUTTEWORKS
21 күн бұрын
I'm glad you did it yourself and that the video helped you. You saved some money to the big boss and made him proud, (win)^2.
My truck (2014 GMC Sierra 1500) has 139K miles and the belts have never been changed. Been thinking about tackling them within the next couple weeks, and this video helps A LOT. I just had to change the thermostat last week, so I might also tackle the water pump, alternator, and coolant temperature sensor while I'm there. Thank you for the great video!
@BUTTEWORKS
5 ай бұрын
I’m glad you found it useful. Thank you very much for the comment.
Fantastic video. Great use of the Ty wraps to help guide the belts in place while rotating the engine.
@BUTTEWORKS
9 ай бұрын
Thank you for your comment.
Thank you so much was struggling at first until this video!
@BUTTEWORKS
Ай бұрын
Glad it helped!
Best video I have seen for all three belts, great job
@BUTTEWORKS
Жыл бұрын
Thank your for your comment!
Great video!! Extremely helpful. Simple and to the point! Very professional. Thank you!!!!
@BUTTEWORKS
3 ай бұрын
Glad it was helpful!. Thank you for your comment and for checking the video.
Great video , im going to do it this weekend Thank you very much 👍
@BUTTEWORKS
11 күн бұрын
Thank you and good luck, it is very easy you'll see.
What a great video!!! You saved me like $250!!! Thank u so much
@BUTTEWORKS
Жыл бұрын
Glad I could help!
Very informative. Well done. Thank you for sharing.
@BUTTEWORKS
9 ай бұрын
Glad it was helpful!
Great video, with great views from top and bottom! Liked the rope derailer technique. Appreciate that you used correct terminology as well (unlike those that call the "A/C belt" a "serpentine belt". It is not a serpentine; it is just a belt.). Adding tensioner, water pump, and alternator changes would have been nice to show, since belts were off already. Thanks for stating all of your tools also (3" extension, 1/2" ratchet, 24 mm socket)!
@BUTTEWORKS
5 ай бұрын
Thank you for your comment, I really appreciate it.
Excellent video Thank you for doing this
@BUTTEWORKS
22 күн бұрын
Glad you enjoyed it!
Amazing brother thank you 👍🏽
Outstanding explanation and video!
@BUTTEWORKS
4 ай бұрын
Thank you very much for your comment!!.
I will be trying this out in a few minutes.
@BUTTEWORKS
2 ай бұрын
I hope all goes well. Thank you for checking the video.
@tommyc8517
2 ай бұрын
@@BUTTEWORKS It went VERY well! One or two minor problems that were easily fixed.
@BUTTEWORKS
2 ай бұрын
@@tommyc8517 Good to hear that.
I have 2014 5.3 166k. Never been changes. Bout to get changes this coming friday...
@BUTTEWORKS
Ай бұрын
All the best, hope the change goes smooth.
Alright, I'm gonna get at it tomorrow!
@BUTTEWORKS
5 ай бұрын
Go for it, it’s easy!
Great video, helped me out!!!
@BUTTEWORKS
5 ай бұрын
Glad it helped!, thank you for checking the video.
Good video ,,step by step😊
@BUTTEWORKS
6 ай бұрын
Thank you, I'm glad you found it useful.
Thanks for this video sir, helped me greatly. L&S
@BUTTEWORKS
3 ай бұрын
Thank you very much. Glad it helped you.
Great video
@BUTTEWORKS
9 ай бұрын
Glad you enjoyed it
Very good video.
@BUTTEWORKS
8 ай бұрын
Glad you liked it
Zip tie genius!!!!
@BUTTEWORKS
3 ай бұрын
Thank you, there is an special tool for that but the zip tie works great and they are cheap.
Thank you
@BUTTEWORKS
3 ай бұрын
You're welcome
@Ransome2501
3 ай бұрын
@@BUTTEWORKS ended up taking it to a local shop and the chirping sound that I thought for sure would be a pulley ended up being a lifter problem. The shop recommended a new engine for $14,000. So I picked the truck up with three new belts installed and brought it to my work to let a couple of friends look at it and sure enough when you remove the oil filler cap the chirping gets louder proving that it’s something internally. Any thoughts? Thanks again
@BUTTEWORKS
3 ай бұрын
@@Ransome2501 No idea, difficult to diagnose without seeing the truck. But it the problem are the lifters I don't know why the want to change the entire engine. Doesn't make any sense.
Hey was`nt there any issue to rotate the engine counter clockwise ? you made all look very nice and simple, congrats,
@BUTTEWORKS
Жыл бұрын
Not at all, it really was easy.
Did changing the ac compressor belt cause your ac to seize? Or was it already seized? Don’t want to change if it seized due to new belt. Thanks
@BUTTEWORKS
Жыл бұрын
It was already seized. I thought the belt broke and change it to later find out it broke because the compressor was seized. Should have thought about that when I first saw melted rubber on the pulley.
Great video. Thanks for the help. What was the mileage on the truck when you changed them?
@BUTTEWORKS
Жыл бұрын
My truck had 140k when I change the belts.
@ryderwarnemuende8947
9 ай бұрын
0:23
Why none of the belts you've listed the Amazon links stated " does not fit my truck " 2014 silverado 5.3 V8?
@BUTTEWORKS
Жыл бұрын
In my case it say "it can not confirm it matches". I believe there may not be enough information for the Amazon algorithm to confirm 100% match. I have the 5.3L V8 and they fit and work perfect.
👍👍👌👌
So you can crank on that bolt left or right
@BUTTEWORKS
Жыл бұрын
I read that counterclockwise you loosen. I'm pretty sure that bolt is super tight so your could turn the engine counterclockwise, but I prefer not to try. Also, it is easier, at least for me, to crank it clockwise while doing the job.
Any problem with ac compressor after you replace the belt ? Seen many gm compressor lock up then belt shredded
@BUTTEWORKS
Жыл бұрын
Yes, compressor was locked up. Actually next video will be replacing it. It broke that new belt right after AC went on.
@hnekcivic
Жыл бұрын
Any update on new ac compressor?
@BUTTEWORKS
Жыл бұрын
@@hnekcivic Yes, video coming up this week. Job done already. Thank you for following up.
Why did you change all 3 belts...was they making any squeaking or chirping noise?
@BUTTEWORKS
9 ай бұрын
No but the AC broke off because the compressor seized so since I had to change that one, for 50 USD I better replace the other two, since they were 9 years old, 150K miles. Manual say replace every 100K.
I wish he would say if you have to throw it in neutral or leave it in park before you start rotating the crankshaft. Done watched 6 video’s with this method but no one says if it had to be in neutral or park
@BUTTEWORKS
3 ай бұрын
I did it in park.
I thought you can't rotate clockwise? I thought it must be counterclockwise only??
@BUTTEWORKS
7 ай бұрын
The engine rotates counterclockwise if you look from the front so I was tightening the nut. However, that nut is so tight that you could turn the engine in the opposite direction and not get it loose.
i got a quote from the dealer 1075 for all three
@BUTTEWORKS
6 ай бұрын
Hahahaha as you can see you can do it for less than $100. Go ahead and good luck, super easy job.
He said vacuum pump. Is that the Power steering belt ?
@BUTTEWORKS
5 ай бұрын
No I meant vacuum pump for the brake booster. Thus truck has no power steering belt. Thank you for checking the video.