2014 Chevrolet Impala transmission electrical problems
Автокөліктер мен көлік құралдары
What to get you the Otofix scan tool with 2 YR'S FREE UPDATES ?? here's the link to my amazon page!!
amzn.to/3PjnC2k
Still dont want to pay $500!! try out the Otofix lite click on link down below for under $400
amzn.to/45HnxuQ
*Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use*
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3JpMtNY
Пікірлер: 123
As an I.T. guy who has sworn off car repairs my whole life...this video really got me into it 💪 thanks man
i was skeptical about you but man you are a PRO!
I love these kinds of vids! Diagnose issue, replace bad part, then programming! Thanks, Oz!!!!
@OzMechanics
10 ай бұрын
I wasn’t sure of programming that’s why I haven’t really put one out. I’m going to see how the outcome is
I had the same problem with my 2015 Chevy Impala I just unplugged the transmission plug from the transmission and sprayed some WD40 on the plug and plugged it back and that fixed the problem. 3 years later and still no problems.
@Darren505
2 ай бұрын
I did the same with my 2015 Impala 5 years ago and it hasn't given me no more problems.
@incith
Ай бұрын
Sorry but can you elaborate on this for me.. just regular wd-40? Did you dry it out or anything after?
@geet3212
28 күн бұрын
@@incithyes it really works a spent $4,000 chasing the problem over the years read this comment and tried it for myself and wouldn't you know $4.00 can of WD-40 did the trick And yes I use the paper towel and tap it and let it dry out first no more problems codes went away!
@exrae1992
28 күн бұрын
did this made things worse
Awesome 👏 Love your channel OZ
Great job Oz, Thanks for sharing!
@OzMechanics
10 ай бұрын
Thanks for watching
Another great video! Great diagnosis
@OzMechanics
10 ай бұрын
Thanks. Hope you have a wonderful weekend
Excellent diagnostic , simple and great, thanks for sharing
@OzMechanics
10 ай бұрын
Thanks for the kind words.
Great video, Oz. Thank you.
@OzMechanics
10 ай бұрын
Thanks for stopping by Luis. Hope you have a wonderful weekend
Always good when people are learning
Great video. My impala doing the same right now lol said color make & model.
Thanks for sharing! Great video.
@OzMechanics
10 ай бұрын
Thank you for watching. Hope you have a wonderful weekend
What to get you the Otofix scan tool with 2 YR'S FREE UPDATES ?? here's the link to my amazon page!! amzn.to/3PjnC2k Still dont want to pay $500!! try out the Otofix lite click on link down below for under $400 amzn.to/45HnxuQ **Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use** Automotive Test Light- amzn.to/3z1Pdxa Flexible Backprobe- amzn.to/3Pyr3zO Multimeter- amzn.to/3PbuT23 OBD Scan Tool- amzn.to/3zaNWnq Wire Piercing Probe- amzn.to/3JpMtNY
Good one Oz! New module makes for a smooth engagement. The module is doing its job adjusting the proper fluid pressure, whereas, the old module must have been in default mode, with the giveaway being the missing circle around the lettered position.
@OzMechanics
10 ай бұрын
This one was a fun one. Actually my first time changing out a tcm on a Impala. Programmed a lot but first time changing them out
@cuahutleko7698
6 ай бұрын
@@OzMechanicsWhere are you located?
Just came across your channel. & subscribed. More programming videos on other makes/models please. Thank you
@OzMechanics
10 ай бұрын
Thanks for stopping by
pretty good video.
Great video Good job.
@OzMechanics
10 ай бұрын
Thanks for watching Paul
Awesome video Oz, I love the way you teach!!!
@OzMechanics
10 ай бұрын
Thanks Roxanne! Glad you enjoyed buoyed the video. What did you think of the programming segment? First video showing the whole process
way to go oz great video ✌
@OzMechanics
10 ай бұрын
Thanks for watching jim
Brother man thanks you very much
@OzMechanics
10 ай бұрын
No, thank you for watching. Glad you enjoyed the video
Awesome video
@OzMechanics
10 ай бұрын
Thanks for stopping by willie. Glad you enjoyed the video
Hello, Post video of you replacing the TCM in the 2014 Chevy Impala
Great job 👍
@OzMechanics
10 ай бұрын
Thanks Shaun
Look at that...pure car daig no fuss no no over acting
@OzMechanics
10 ай бұрын
Thanks for watching
👍👍
Nice
Do I need to do the transmission fast learn adapt for my transmission to work after programming a new TCM ?
Wish you would have show the actual replacement of the module inside the transmission
@OzMechanics
10 ай бұрын
Most of my videos are diagnostic videos. So I focus more on the process of showing how to properly diagnose the issue. Thanks for watching
@crasher88
10 ай бұрын
Oh I love the diagnostic videos, hoping the premier Houston based youtube mechanic will host a training event some time soon
@teranluis100
10 ай бұрын
@crasher88 Would he nice, not many training events around here, at least that I know of.
Awesome
@OzMechanics
10 ай бұрын
Thanks for stopping by
I have 2018 Impala 3.6 having shifting issues, and I'm probably going to replace solenoid or valve body. Did you have to drop the entire engine to get into the trans?
Another great video OZ. Did you change the electrical part of the TCM, or the whole TCM? If you have changed just the TCM module (electrical part) that's a big job as this is inside the TCM. Thanks for sharing. Until the next one, take care.
@OzMechanics
10 ай бұрын
I changed the whole valve body that also has the tcm
Would have loved to see the whole repair. Awesome though
@OzMechanics
10 ай бұрын
Thanks for watching
Had the same code pop up, the TCM was actually fine, the connector however was making a bad connection. i wiggled it while the car was running and it smoothed out for a short time, then i was able to recreate the problem. I repinned the connector because i couldn't find a replacement. that was 45,000 miles ago.
@michaelstemage2989
7 ай бұрын
I am having the same problem is your vehicle still running fine?
@matthewkey1
7 ай бұрын
yes been doing fine since i repinned the connection. @@michaelstemage2989
1st and foremost lol great video other than not using a voltmeter instead of a test light.
Good job but I guess I got lucky my 2015 had the same problem I just unplugged it and sprayed wd40 on the plug and it fixed it. 5 years later no problems.
I have the same exact problem with my car. I have a 2015. Are you located anywhere near New York Connecticut or New Jersey?
nice video tks
@OzMechanics
10 ай бұрын
Thanks for watching Danman. What did you think of the programming part ? Seeing if i should continue doing them
@danman9017
10 ай бұрын
@@OzMechanics i do think programming info you share was good and about tool also tks
Oz-esome video!!
@OzMechanics
10 ай бұрын
Thanks for stopping by
Thank you for the video! I went to a mechanic for this issue he told me if I replaced the Tcm I would have to get a whole new transmission is that true?
@OzMechanics
3 ай бұрын
Not on this one ☝️
i put in a used TCM in a 2007 Chevy Impalla. Tried to reprogram with info from internet info. Have R,3,2 & 1 gears. D is funcky. Guess I have to have a "PRO" program it. What are your thoughts?
@OzMechanics
2 ай бұрын
How did you program it
Where qre you located i have 14 impala that sputter and traction light comes on then the doors unlock then lock while tour driving. I have to let go of the gas let it slow down then it resets itself all while your doing highway speed
@dwaters2k10
3 ай бұрын
I have the same exact problem it’s so annoying.
For the wake up signal from the 13 pin, what voltage is there supposed to be? On pin 12 I have 12.6 but on pin 13 I have 11.8v. All other voltages check out. I have the 2014 impala, same transmission.
@OzMechanics
9 ай бұрын
Check out this video talks a lil more about the wake up signal
@adamhoelscher400
9 ай бұрын
@@OzMechanics thanks for the reply! I watched it again but didn’t see any mention of the voltages needed. I have over 12v on pin 12 but only 11.8v on pin 13.
wat if i have no power on the connectors? im getting nothing on my tcm connector
Where are you located?
this happened to my 2015 2lt 8 months ago and fixed it with the new tcm. now the same thing is happening. what should i do?
@sub-zero1128
5 ай бұрын
could be bad wiring or connector to the tcm
@itsprestonc
5 ай бұрын
@@sub-zero1128 the pink wire, either negative or positive power i forgot which one, had a small split right where it pins in and it would cause it to unpin
@dwaters2k10
3 ай бұрын
Did you have to get a new transmission as well?
Where are you located? My 2013 Impala 3.6 L is doing the same thing.
@cuahutleko7698
3 ай бұрын
????? ?
I would have pulled out the two fuses before i went down to the transmission module. Power on both sides if fuse but you dont know if the legs were there.
@OzMechanics
10 ай бұрын
Awesome
@richardostrowski6420
10 ай бұрын
He showed how he checked voltage and grounds at the transmission connector which would indicate that he was getting voltage through the fuses.
@mikesabin8568
10 ай бұрын
@@richardostrowski6420 I understand that…. Im just saying before you do that, quick check to see if the legs are on the fuses
I've got a 2012 Impala 3.6L with the same issues and U0101 code. The so called mechanic told me i need a new transmission without even doing anything. Should I just tow it to a transmission shop?
@OzMechanics
10 ай бұрын
I would look for a good diagnostician in your area that would be able to properly find the issue
@raymondcunningham7083
10 ай бұрын
Ok. Thanks. I wished you were my mechanic 😊
@arielcastro34
6 ай бұрын
I have a 2016 3.6L u0101 what end up being the problem pls Help
How did you get the connector off! I can’t seem to get mine off!smh!
@incith
Ай бұрын
You gotta pinch the sides of the red clip and then slide it out first. Then push the black part in front of the grey uh..grey thing that locks it into place.. the grey thing will slide down easily but it's really hard to get everything pushed right
those programming procedures has to be done online or offline!!?
@OzMechanics
10 ай бұрын
Online. They have to pull the software off the server to program
@ebrahimsadeghi5883
10 ай бұрын
@@OzMechanics could you share the link to get to right software of GM downloading Thanks mate 🙏
You should be a teacher.
@OzMechanics
10 ай бұрын
Thanks David. I’m thinking about writing some material to teach later on
I do Electrical Diagnostics but have not got into programming yet( which I find boring) Can you recommend a website to learn about programming.
@OzMechanics
9 ай бұрын
L1 auto training has amazing information.
@OzMechanics
9 ай бұрын
L1training.com
@joeandgod1
9 ай бұрын
@@OzMechanics Ok. I actually have heard of him. I'm gonna look into it. Thanks.
Enjoy your weekend with all your family around you, Oz Mechanics 👍 SHREWD Oz Mechanics From Nick Ayivor from London England UK 🇬🇧 ⏰️ 23::45pm
@OzMechanics
10 ай бұрын
Thanks for stopping by Nick. Hope all is well with you and your family
Man I wish I knew which one was the TCM connector . You didn’t show it 😩
@OzMechanics
5 ай бұрын
It’s the one on the transmission pan
@Rozay773
5 ай бұрын
@@OzMechanics I’ll check it out, thanks!
@cuahutleko7698
3 ай бұрын
@@Rozay773How come you are ignoring my request? I am trying to see if you can fix my car.
@cuahutleko7698
3 ай бұрын
@@Rozay773I meant Ozmechanics.
Oz there no sound
@OzMechanics
10 ай бұрын
Try going into it again. I’m getting sound on my end
??????
No sound bro
@OzMechanics
10 ай бұрын
There’s sound on my end
@juanrodriguez-ry6yt
10 ай бұрын
@@OzMechanics i can hear you even in Florida
@2094Ryan
10 ай бұрын
Sound on now.
Ты причину не нашёл из за чего так произошло. Ну поменял но она снова испортится потому что ты причину не нашёл