2013 Volvo XC 60 ABS / DSTC dash light on

Тәжірибелік нұсқаулар және стиль

This job is very straight forward. Remember after the installation clear the code and drive some yards for the system to read the ABS trigger signals.
Links in this section are "affiliate links", which means that if you click and buy something, I earn a small commission at no extra cost to you. Thank you for your support.
Torx long wrench set. amzn.to/3xwoUNy
Multibrand car codes scanner. amzn.to/3bcV615
ABS Sensor. amzn.to/3HzoGKh
Green Loctite. amzn.to/39EyxBW

Пікірлер: 32

  • @lisakline2743
    @lisakline2743 Жыл бұрын

    Where do I buy a sensor scanner like you have? Or at least one that will work on my Volvo. I went to OReillys and Auto zone and Car Quest and none of the codes come up right. It's been like this for 4 months now.

  • @BUTTEWORKS

    @BUTTEWORKS

    Жыл бұрын

    I bought in in amazon, link in the description.

  • @stevencarbone7808
    @stevencarbone7808 Жыл бұрын

    Did you ever reset the transmission code reset for new oil ? I changed my transmission oil and haven’t yet . Does it matter?

  • @BUTTEWORKS

    @BUTTEWORKS

    Жыл бұрын

    Yes, I always do, does not take any time and it is a good reminder for the next change

  • @roijames9066
    @roijames90662 жыл бұрын

    My 2013 Volvo XC70 is getting that message. Thanks for your video. It helps. I noticed when you see the DSTC alert on your display at around 20 seconds in, there is a small triangular arrow on the upper right of message. I believe, and could be wrong about this, but it's telling you there, that the problem is in your upper right tire. Now it's not specifying sensor but it might be giving you the location. Am I wrong about this? Or does it represent something entirely different?

  • @BUTTEWORKS

    @BUTTEWORKS

    2 жыл бұрын

    I really don't know, it could be a pager sign to go to the next message, but it could be what you say, which in that case kudos to Volvo for the extra info. I'll keep and eye in the future if another message pops up. Thank you for the hint Roi James.

  • @samuelkmaina

    @samuelkmaina

    2 жыл бұрын

    Great info. Thank you.

  • @danydms1

    @danydms1

    Жыл бұрын

    Every error message comes with this triangle.

  • @mightyg8545
    @mightyg8545 Жыл бұрын

    In my case the garage changed the injector valve. My Volvo has 4 injected valves/dispensers ,two of them, one after the other were changed with in a week time . And it’s expensive x, 40 $ each It feels weird, anything related ?

  • @BUTTEWORKS

    @BUTTEWORKS

    Жыл бұрын

    Never heard of that as cause of a ABS DSTC, which it is related to ABS and traction control. Don't see how the injector failure would disable ABS or DSTC, which are safety feature.

  • @sangkyupark6586
    @sangkyupark65862 жыл бұрын

    I've replaced wheel sensor. Can i reset message without scanner?

  • @BUTTEWORKS

    @BUTTEWORKS

    2 жыл бұрын

    No you can’t but if you don’t have one you can ask any workshop to reset it for you if it does not go away by itself after driving a few kilometers.

  • @mustoofa
    @mustoofa Жыл бұрын

    My DTSC light has gone away after the garage changed the faulty ABS sensor. But the city safety service required message is still there. Are they related ? Maybe the garage didn’t clear the code ? Thanks

  • @BUTTEWORKS

    @BUTTEWORKS

    Жыл бұрын

    Hi Mustafa, could very well being that they didn't cleared the code. if you have an scanner or somebody can borrow one you could do it your self.

  • @mustoofa

    @mustoofa

    Жыл бұрын

    @@BUTTEWORKS thank you. I went ahead and bought a scanner. Indeed the codes were not cleared so I cleared them. I rescanned and no DTC codes were highlighted. However the city safety message still won’t go away. It’s blocking my start/stop. Appreciate any tips. Thanks

  • @BUTTEWORKS

    @BUTTEWORKS

    Жыл бұрын

    @@mustoofa I don't know much about City Safety but does your scanner read all Volvo compatible codes or you just got a OBDII scanner?.

  • @pgreenx
    @pgreenx Жыл бұрын

    how come the SDTC code went away because you put a new ABS sensor in? Thanks for posting this

  • @BUTTEWORKS

    @BUTTEWORKS

    Жыл бұрын

    DSTC needs ABS to work so once the ABS was fixed problem went away.

  • @pgreenx

    @pgreenx

    Жыл бұрын

    @@BUTTEWORKS thanks for the fast reply. I found out my problem. Haldex pump burned out which blew a fuse in the all-wheel-drive system which disconnects the DEM from the MAIN compute generating a SDTC Code. So I know what it is. I just need a new haldex pump. Luckily it’s GEN five, which is easy to replace. Thanks again.

  • @BUTTEWORKS

    @BUTTEWORKS

    Жыл бұрын

    @@pgreenx Good job finding the issue in you car!

  • @alexanderm8061
    @alexanderm80612 жыл бұрын

    My car is doing the same thing can you fix it?

  • @BUTTEWORKS

    @BUTTEWORKS

    2 жыл бұрын

    I can't but you can, get an scanner and find out. it could be the sensor, the cable or the ABS module. Swap the sensor with one of another wheel to see if that removes the alarm. You will need the scanner to clear the code and after replacing the sensor drive some meters so the computer re acquires the signal.

  • @alexanderm8061

    @alexanderm8061

    2 жыл бұрын

    Thank you

  • @ovidiuandrei1702
    @ovidiuandrei17022 ай бұрын

    Easy peasy !!!😂😂😂

  • @EdensMask
    @EdensMask2 жыл бұрын

    Why use glue on the screw?

  • @BUTTEWORKS

    @BUTTEWORKS

    2 жыл бұрын

    It is blue loctite so it will come out whenever needs to be removed, however in a place with so many vibrations it gives me peace of mind.

  • @EdensMask

    @EdensMask

    2 жыл бұрын

    @@BUTTEWORKS I tried to check the fuses but the box defeated me. I wasn’t able to get to them under the top relays.

  • @BUTTEWORKS

    @BUTTEWORKS

    2 жыл бұрын

    @@EdensMask I know exactly what you mean, it gave me a hard time too. You can try to swap the sensors from one wheel to the other and see if the problem goes away. The car scanner tells you what wheel, left or right is having the issue so that will help you find out if the problem is the sensor. Bear in mind that after changing the sensors the alarm may be still on, you will have to drive some meters for the system to acknowledge the new signal.

  • @lagresomadsl

    @lagresomadsl

    5 ай бұрын

    @@BUTTEWORKSSensors is different left to right, so this cause of action will trigger a new set of dtc.

  • @murugank8870
    @murugank88702 жыл бұрын

    Tamil

  • @sprig3432
    @sprig34322 жыл бұрын

    Volvo's suck honestly

  • @BUTTEWORKS

    @BUTTEWORKS

    2 жыл бұрын

    Hi Vladimir, I don't have a lot of experience with Volvo, just this one and so far it has been easy to service.

Келесі