It is 2013 Nissan Juke 1.6l engine with timing chain noise. Replaced whole timing kit.
Жүктеу.....
Пікірлер: 36
@OscarOliu Жыл бұрын
That's crazy you can do that with the engine in, most cars you have to do a hell of a ton to get to that part of it lol
@yd.a.v.4689Ай бұрын
Здравствуйте, возможно вы знаете оригинальные номера клапанов
@quanyuan482711 ай бұрын
I had the same issue for my 2013 Juke with timing chain noise. The local Nissan dealer said I needed to spend 9000 NZD (about 4800 Usd) for a new part to fix.....
@fayzullo4317
11 ай бұрын
You should work on your car yourself , you may spend only couple hundred dollars for only parts. It is not so difficult to work on it
@peetymcfly8871
10 ай бұрын
$4800? You could get another juke engine and transmission for that price. The juke right now is a very good car for tuning. It is old so you can find many used parts to build a little fun monster car to drive around.
@SaifKhan-bq2oe8 ай бұрын
can u anyone answer this after doing exactly what i u did if i rotate engine one full turn or 2 turn will these mark Matich? cause i did this and than roate engine and was trying to see if mark on the cam saft match with mark on chain after full one or 2 chain roation and the mark did not match on chain and grove on cam saft
@fayzullo4317
8 ай бұрын
Don’t worry about it , you did the right process , after you rotate the engine second time it won’t be the same , make sure timing chain is not stretched and tight enough.
@SaifKhan-bq2oe
8 ай бұрын
ah bro thank u so much i opened and did it again same thing and it did not align again so i thought i was doing something wrong thanks for promt reply bro how do i know it all is ok what is the procedure is there any test? cause chain color mark and camsaft dont align and u said dont worry so what how do i know it ok?@@fayzullo4317
@fayzullo4317
8 ай бұрын
Just do the timing chain right and rotate the engine twice make sure it won’t stop while you rotating you can feel also compression inside all s cylinders
@SaifKhan-bq2oe
8 ай бұрын
ok thanks so as long as it move and i can hear compression all is ok i was worried what if timing is wrong and vale will hit the piston bro thanks for ur helpppppppp@@fayzullo4317
@edgarsantos18976 ай бұрын
I have a 2013 nissan rogue sounds similar gotta get the chain looked at
@fayzullo4317
Ай бұрын
Yes you need to check chain
@edgarsantos1897
Ай бұрын
@@fayzullo4317 I was told by the Mecanic it could be the cam phaser or anything rattle like the ac compressor
@alson.4476 Жыл бұрын
Hej did you get to solve the issue with the noise, l have a Nissan juke 2015 and it’s making the same noise when l start it and when l drive it. What could you think would be the problem?
@fayzullo4317
Жыл бұрын
Yes the noise was from timing chain. Timing guide was broken and chain was stretched out.
@ulf-dieterkoepp7865
Жыл бұрын
@@fayzullo4317 what was the mileage then?
@edgarsantos1897
6 ай бұрын
I have a 2013 nisaan rouge and it sounds similar gotta get my chain diagnosed
@yaad22269 ай бұрын
how did u remove chain that park u did not show
@fayzullo4317
9 ай бұрын
If you take off all timing guides and tensioner, it will come off itself.
@yaad2226
9 ай бұрын
or so no gear need to be removed thanks bro@@fayzullo4317
@yaad2226
9 ай бұрын
@@fayzullo4317 bro i cant get timing cover out i try to pry it it dont come i check for all bold cant see any how much force u need to pry it?
@fayzullo4317
9 ай бұрын
@@yaad2226 you don’t need much force to remove the cover , it should be easy. There should be some hidden bolts, carefully check bolts one more time.
@yaad2226
9 ай бұрын
bro thanks i got cover out yesterday yes there was hidden bolts @@fayzullo4317
@johnbobb1835 Жыл бұрын
Do you have the part number for the kit or a link from where you got it?
@fayzullo4317
Жыл бұрын
I am sorry I don’t have a part number. I got it from autozone.
@johnbobb1835
Жыл бұрын
@fayzullo4317 ok Sir, I was trying to find it on their website and couldn't. I'm about to take mine apart today. any tips or tricks? Did you have to replace the timing cover as well? I saw yours had a cut in it?
@ulf-dieterkoepp7865
Жыл бұрын
@@johnbobb1835 yes the timing kit assembly cover has a lot of screws all over the place. It is really a pain....
@silvianunez2445 ай бұрын
I have to take my car for that too. My juke is bad. They found metal in the oil and is leaking a lot of oil.
@fayzullo4317
Ай бұрын
Sorry to hear this
@brandonprettyman2695 ай бұрын
Engine sounds horrible after your repair
@fayzullo4317
5 ай бұрын
If you want original sound , you would need a new engine.
@gabitsu-ftw3871 Жыл бұрын
So only option is to change the timing chain? Sounds pretty much expensive
@fayzullo4317
Жыл бұрын
Not really expensive
@alintomaogrezeanu881
Жыл бұрын
How much cost for replace timing chain?
@ulf-dieterkoepp7865
Жыл бұрын
@@fayzullo4317 Correct if you have honed the skills in the correct way. If car is taken to mechanics, they charge $$$$$$ for six hours labour rates.
@fayzullo4317
Жыл бұрын
@@alintomaogrezeanu881 only thing you spend money for timing kit it is probably around $140. It doesn’t require any special tool or nothing.
Пікірлер: 36
That's crazy you can do that with the engine in, most cars you have to do a hell of a ton to get to that part of it lol
Здравствуйте, возможно вы знаете оригинальные номера клапанов
I had the same issue for my 2013 Juke with timing chain noise. The local Nissan dealer said I needed to spend 9000 NZD (about 4800 Usd) for a new part to fix.....
@fayzullo4317
11 ай бұрын
You should work on your car yourself , you may spend only couple hundred dollars for only parts. It is not so difficult to work on it
@peetymcfly8871
10 ай бұрын
$4800? You could get another juke engine and transmission for that price. The juke right now is a very good car for tuning. It is old so you can find many used parts to build a little fun monster car to drive around.
can u anyone answer this after doing exactly what i u did if i rotate engine one full turn or 2 turn will these mark Matich? cause i did this and than roate engine and was trying to see if mark on the cam saft match with mark on chain after full one or 2 chain roation and the mark did not match on chain and grove on cam saft
@fayzullo4317
8 ай бұрын
Don’t worry about it , you did the right process , after you rotate the engine second time it won’t be the same , make sure timing chain is not stretched and tight enough.
@SaifKhan-bq2oe
8 ай бұрын
ah bro thank u so much i opened and did it again same thing and it did not align again so i thought i was doing something wrong thanks for promt reply bro how do i know it all is ok what is the procedure is there any test? cause chain color mark and camsaft dont align and u said dont worry so what how do i know it ok?@@fayzullo4317
@fayzullo4317
8 ай бұрын
Just do the timing chain right and rotate the engine twice make sure it won’t stop while you rotating you can feel also compression inside all s cylinders
@SaifKhan-bq2oe
8 ай бұрын
ok thanks so as long as it move and i can hear compression all is ok i was worried what if timing is wrong and vale will hit the piston bro thanks for ur helpppppppp@@fayzullo4317
I have a 2013 nissan rogue sounds similar gotta get the chain looked at
@fayzullo4317
Ай бұрын
Yes you need to check chain
@edgarsantos1897
Ай бұрын
@@fayzullo4317 I was told by the Mecanic it could be the cam phaser or anything rattle like the ac compressor
Hej did you get to solve the issue with the noise, l have a Nissan juke 2015 and it’s making the same noise when l start it and when l drive it. What could you think would be the problem?
@fayzullo4317
Жыл бұрын
Yes the noise was from timing chain. Timing guide was broken and chain was stretched out.
@ulf-dieterkoepp7865
Жыл бұрын
@@fayzullo4317 what was the mileage then?
@edgarsantos1897
6 ай бұрын
I have a 2013 nisaan rouge and it sounds similar gotta get my chain diagnosed
how did u remove chain that park u did not show
@fayzullo4317
9 ай бұрын
If you take off all timing guides and tensioner, it will come off itself.
@yaad2226
9 ай бұрын
or so no gear need to be removed thanks bro@@fayzullo4317
@yaad2226
9 ай бұрын
@@fayzullo4317 bro i cant get timing cover out i try to pry it it dont come i check for all bold cant see any how much force u need to pry it?
@fayzullo4317
9 ай бұрын
@@yaad2226 you don’t need much force to remove the cover , it should be easy. There should be some hidden bolts, carefully check bolts one more time.
@yaad2226
9 ай бұрын
bro thanks i got cover out yesterday yes there was hidden bolts @@fayzullo4317
Do you have the part number for the kit or a link from where you got it?
@fayzullo4317
Жыл бұрын
I am sorry I don’t have a part number. I got it from autozone.
@johnbobb1835
Жыл бұрын
@fayzullo4317 ok Sir, I was trying to find it on their website and couldn't. I'm about to take mine apart today. any tips or tricks? Did you have to replace the timing cover as well? I saw yours had a cut in it?
@ulf-dieterkoepp7865
Жыл бұрын
@@johnbobb1835 yes the timing kit assembly cover has a lot of screws all over the place. It is really a pain....
I have to take my car for that too. My juke is bad. They found metal in the oil and is leaking a lot of oil.
@fayzullo4317
Ай бұрын
Sorry to hear this
Engine sounds horrible after your repair
@fayzullo4317
5 ай бұрын
If you want original sound , you would need a new engine.
So only option is to change the timing chain? Sounds pretty much expensive
@fayzullo4317
Жыл бұрын
Not really expensive
@alintomaogrezeanu881
Жыл бұрын
How much cost for replace timing chain?
@ulf-dieterkoepp7865
Жыл бұрын
@@fayzullo4317 Correct if you have honed the skills in the correct way. If car is taken to mechanics, they charge $$$$$$ for six hours labour rates.
@fayzullo4317
Жыл бұрын
@@alintomaogrezeanu881 only thing you spend money for timing kit it is probably around $140. It doesn’t require any special tool or nothing.