For those following along, you don't need to remove the fuel rails or disconnect the fuel line. The lower intake will unbolt and then the whole assemble can be moved out of the way to the left.

You don't have to disconnect the injectors.. Just leave the fuel line connected and put the whole piece to the side. Great video tho. I think I will be doing this tomorrow to my 2011 town and country.

@thisbeatmajor

3 жыл бұрын

yea the throttle body either right

I used this video to totally take apart and put back together my 2013 Grand Caravan. Excellent job with lots of details on the clips, how to remove them, and other important details. Nice job!

@kalebmulisha6313

3 жыл бұрын

We it pretty easy to fix

Great work! I replaced the plugs on my 3.6 Pentastar and that was a several hour job.

Having the same issue with mine. Was very helpful, thank you.

Thank you guys so much it was a great video my car dealership could not figure out the problem the car has been going back in forth 5 time already going there today with this video and call his Mechanic a Mexican.

U made it sound so easy man. U r awesome dude, u saved me $$$ on labor. I accidentally found out I didn't have to remove the fuel lines. But thanks again!

@RuvimAbaras

5 жыл бұрын

Omar Karshe thanks! And you are very welcome!

@seatime674

Ай бұрын

​@@RuvimAbarasis it okay to use the same intake manifold gaskets

@seatime674

Ай бұрын

I need to do this on my '16 you mean I can do this without disconnecting any of the fuel rails losing any gas???😢

"Today we're working on a 2013 Chrysler Town and Country piece of garbage"....lmao! 😂

For those doing this the first time time be advised that the 2 top rear bolts of the manifold will only release once the bottom lug nut is loosened from that bracket. It's a tangle to get to it but no other way.

That video was funny and got down right to the point, made it look so easy 😱

@RuvimAbaras

5 жыл бұрын

Thank you !

@Tay58382

2 жыл бұрын

This is a shit video, this guy is not a mechanic by anyone's standards seems he's never heard of a torque wrench

Awesome thanks so much for the detailed explanation I really appreciate it and I’m going to try it out this weekend on my husband’s best friend’s town and country van Wish me luck!

@RuvimAbaras

9 ай бұрын

Good luck 🤞 )

Great video! Thanks for posting.

Dobry film...Dzięki za pomoc 👍😉 Pozdrawiam🙋‍♂️

Thank for your video very helpful

Good video, kind of humorous and nice editing. Well done.

@g-da-da-da

2 жыл бұрын

Get the matches! lol

Fires are good for ratings. Thank you for the video

@RuvimAbaras

5 жыл бұрын

Lol thanks !

Thanks for the video!.

I’m not sure if anyone mentioned but you need to make sure the car is floor level , otherwise you will have a lot antifreeze overflow and mix with oil. I learned the hard way and ended up doing an oil change afterwards because of that overlooked.

@RuvimAbaras

5 жыл бұрын

Daniel Alvarado Great advice thank you!

Excellent your the best .very good steps to me thanks

@RuvimAbaras

5 жыл бұрын

Thank you thank you!

2017 dodge GC..Same issue. The dealer said about $1340 wich includes the tax. And fresh oil as well

Can a faulty or cracked oil cooler on this car cause oil to mix with the water?

Good video. Knowing you have to take half of the top end of the engine apart I thinking I’ll pay someone to do this job for me

I’m losing coolant from the hose on the side of the coolant. What do you all recommend? Replace that piece?

Great job. What do you think caused such a massive leak? This part looks like it should not have failed in a car as new as this

@Tay58382

2 жыл бұрын

This is a very common problem for this motor and usually will start leaking from yr 8 to year 10 with out fail the worst I've seen is a loss of a quart of oil a day every day until they Parings are replaced and by all means dont forget there is a torque sequence and a set number of inch-pounds to torque to.

Obviously you are not a professional mechanic,you forgotten all about the muffler bearings adjusting screw ,right next to the blinker fluid reservoir . Just by looking at the fill line ,I noticed it was very low on fluid ,too. Wishing you luck on your next project and thank you for not working on my automatic steering wheel

@RuvimAbaras

2 жыл бұрын

Lol

Did you have to do an engine flush to get rid of water in the oil? I got lots of water in my oil and oil in my coolant sections.

@RuvimAbaras

5 жыл бұрын

Hong Kong User no sir flash is not necessary, just drain all the oil and put the new one

Is this the part that causes the oil pour out

Oil cooler has been upgraded.

This oil cooler should be recalled. Every Chrysler product i have this part has failed on the 3.6. Those of you looking to buy any chrysler vehicle w a 3.6 know this is a major issue. Along with bad rocker arms and cooling fans.

@bradthesing

3 жыл бұрын

Was the oil cooler broken or deformed that caused the leak or was it just the gaskets/o-rings that were leaking?

@jeremyallen3448

3 жыл бұрын

@@bradthesing it wasnt deformed as far as i could tell but it wouldnt take much for the seals to start leaking. Putting presure on the housing with each oil change weakens the seals. Replace entire cooler i wouldnt do just new seals. Ive seen these leak oil faster than you could pour ir

will this work for a 2014 dodge grand caravan if they have he same engine

@RuvimAbaras

4 жыл бұрын

I believe so

Also when I was watching this video not sure if it matters but isn’t that the wrong type of coolant in the car? It’s supposed to be dexcool correct? Also why didn’t you replace the spark plugs and the gaskets on both sides of the manifold?

@RuvimAbaras

5 жыл бұрын

Robert Garcia Yes you’re correct the coolant should be dexcool, The spar plugs was already replaced and we didn’t had the gasket but it’s definitely a good idea to replace

@robertgarcia9006

5 жыл бұрын

Ruva A.A do you know if they fixed these oil cooler problems on the 2017 dodge caravan? I bought one of those caravans but the 2017 model

@RuvimAbaras

5 жыл бұрын

Looks like same oil cooler, I would fix it myself !

@pavel.murza.2839

5 жыл бұрын

When you change spark plugs you need to also change PCV valve for better gas usage or restore gas usage I did four cars like that!

Pretty good video guys, love the sense of humour!

Great video and yes 2013 piece of garbage. Had a 2012 Dodge Grand Caravan with same failure. Oil change place said “Looks like a transmission leak” as well........ Also interesting fact the local Dodge dealer had replaced the front head 3 months ago because of stalling and never mentioned a oil leak from this part. They must have figured it would be repeat business later.

@RuvimAbaras

5 жыл бұрын

Chris Foster yep! avoid dealership= stealership

@randallhunter3912

5 жыл бұрын

Does coolant flow thru the oil cooler also?

You didn't torque the screws, 9ft lbs for the oil cooler and 19 for the intake manifold. Check out motor city mechanic's youtube channel.

@RuvimAbaras

3 жыл бұрын

repo fuzz thanks !

Mine was replaced twice. 2nd replacement on 3/27/23 with an all steel one. Since 4/3/23 it has started leaking again. What should I do?😮😢 I don't have the oil burning smell. the labor for this has already costed me $1000 in the last 6mths. Oil spots all over my driveway

@RuvimAbaras

Жыл бұрын

I would take it back and ask them to fix it again with the warranty

I have to do this on my 2019 Grand Caravan sxt. I will be getting the Aluminum one and not Plastic!

How many foot pounds do you tighten down the cooler too? Each bolt? I recommend just tighten up with a good feel. A torque wrench will only strip the threads on the aluminum manifold. This is a night mare if you do that. You have to re tap the hole a tad bigger and use a new bigger bolt. This entire design was done by an engineer on ACID and drunk and with a brain tumor.

Very good video. I have the same problem and I will change the oil housing myself. I just wanted to ask you is it necessary to drain the coolant? Thanks

@ventsislavslavchev9079

5 жыл бұрын

@abortioncritical Thanks. I was just wondering if I can do it without draining the coolant and do the coolant and the oil change after. Thanks again.

@RuvimAbaras

5 жыл бұрын

You need to drain coolant, and I would recommend to change oil after

@ventsislavslavchev9079

5 жыл бұрын

@@RuvimAbaras I see. I will do it today. And thanks for the video😀 it is very helpful. Have a good day.

@ventsislavslavchev9079

5 жыл бұрын

Hey, guys, I did it few months ago, but it leaked after a few thousand km. I did it again few days ago and it is leaking again. What I am doing wrong? Do you think that I did something wrong, there is not much wrong you can do when removing and installing the new part. Any comments are appreciated. Thank you

@juliancortez3250

4 жыл бұрын

@@ventsislavslavchev9079 get a Mexican to do it.....lol

What is the piece he sat on top? With the six screws before he put the injectors on?

@barbaradriscoll6140

10 ай бұрын

Manifold

Great video

@RuvimAbaras

Жыл бұрын

🙏

Did you have to reprogram the throttlebody after installation

@hairylarry6167

2 жыл бұрын

Nope, it will correct itself.

Do you have to drain the coolant for this or can you replace the oil filter housing without do so?

@RuvimAbaras

5 жыл бұрын

SMKL32 You need to drain coolant

@Tay58382

2 жыл бұрын

Dont follow anything this clown does in this video there were at least 3 things he did that didn't need be done, I can tell he's no mechanic at all probably wouldn't know a torque wrench if you hit him with it

@shaneb.3982

2 жыл бұрын

@@Tay58382 cry much?

@johnjobber2219

2 жыл бұрын

Pretty poorly done

How much the oil cooler cost and where do you buy it my van hat that problem in oreilly the one $300 for that part you know a place I can get a cheaper

@RuvimAbaras

4 жыл бұрын

We bought it on eBay

Great video but please use the torque wrench when installing the screw and cross and square pattern else will cost you fortune

how many miles did you put on that pentastar before it starts to leak?

@RuvimAbaras

5 жыл бұрын

About 120,000 miles

@AviationNut

5 жыл бұрын

My 2015 Grand Caravan started leaking sometime this week it's got 97,760 miles right now. I just ordered the part and I am planning on doing this on Monday when it's a little warmer here in Chicago.

@joshforsyth4660

4 жыл бұрын

36,000 miles for me and now again at 50,000 pretty pathetic

@DandyDoesIt

2 жыл бұрын

I'm at 243k miles and just now having this issue. Visiting mechanic tomorrow morning. Going to do spark plugs as well. PCV valve I saw mentioned in the comments here ? Wondering how much $ I'm in for.

@LBYINCHINA

2 жыл бұрын

@@DandyDoesIt I sold mine last year, blue smoke coming out of the pipe.

👌👍

I have the same car i found the water in the radiator has oil mixed in but no water in the oil could the oil cooler be the problem? The car drives fine but overheats fast.

@RuvimAbaras

5 жыл бұрын

Sure or head gasket

@robertdurrance8161

5 жыл бұрын

Josh Santiago that is a head gasket failure symptom

@kchappelle

5 жыл бұрын

I had oil in my coolant twice. Oil cooler problem. replace oil cooler.

@randallhunter3912

5 жыл бұрын

Is the head gasket the one that he re-uses?

How long did it take for you to replace it?

@RuvimAbaras

5 жыл бұрын

I would say little less than two hours

Mine is leaking water from around the oil housing. I put a new hose on it but it still leaks. Have you had this problem? No water in oil.

@victorperez4881

4 жыл бұрын

Sounds like it's going to be the oil filter housing, did you get your issue fix ?if so what was it ?

The fuel is leaking bring the matches lol

Will the oil cooler leak antifreeze also

@zuberalisyed9786

3 жыл бұрын

Yes it is the intake for Oil, fuel and coolant

Those red clamps are a pain in the ass to remove. The ones prior to the fuel leak. How did you do it so easily?

Thanks

How can you tell if it's just the cooler or the cooler lines

@RuvimAbaras

5 жыл бұрын

I would start with cooler then move on to the cylinder head

🤣🤣 got jokes “working faster then a Mexican

Good boys

Ok until you reached the removal of thr fuel rail, DO NOT, I REPEAT DO NOT remove the fuel rail, leave it attached to the lower intake manifold, only detach the fuel injector connectors and fuel rail connector. Lift the entire unit up and out for full access to coolant assembly. Be sure to TORQUE all bolt in a sequence cross pattern to prevent future leaks.

@RuvimAbaras

5 ай бұрын

Thank you for advice 🙏

it's too zoomed in. got my money's worth here though 3:50

How much did you spend on that replacement oil cooler. I called and was told $400

@RuvimAbaras

4 жыл бұрын

Little over $100 on eBay

@cbdfpv

4 жыл бұрын

Ruva A.A that’s not OEM correct? I don’t trust after market ones to many bad reviews

@RuvimAbaras

4 жыл бұрын

Depends on the brand sometimes after market is not as bad, in our situation only seals went bad

The engain like in dodge journey

Umm why are you using green antifreeze on your pentastar is the real question your suppose to be using pink hybrid or purple on later models

@RuvimAbaras

3 жыл бұрын

Yes that's true thank you for mention that! I guess we use that cheap anti freeze to rinse the engine after that we used Orange anti freeze

WHY ARE YOU REMOVING THE FUEL RAIL?

@RuvimAbaras

4 жыл бұрын

I guess just out-of-the-way

If your 3.6 engine hasn’t had this leak, it will. There is a TSB on this.

@masonbrunner7824

7 ай бұрын

Tsb?

Bring the matches. lol

Спасибо, смотрел с субтитрами. 😂

Get a match? That will help dry up the gas!

@RuvimAbaras

6 жыл бұрын

+Michael Dennis haha that’s right )

where is the oil temp sensor on this motor?

@RuvimAbaras

Жыл бұрын

You mean Oil pressure sensor??

@dizzolve

Жыл бұрын

@@RuvimAbaras no temp. I think it's actually on the oiler cooler unit there.

@RuvimAbaras

Жыл бұрын

I believe there is two sensors, one for water, another is for oil

@dizzolve

Жыл бұрын

@@RuvimAbaras Yep -- I know there are gauges for coolant temp and oil temp in the info display so there are sensors in there somewhere

Komrade, Putin would be proud. But he is busy making a to-do list for Trump. We will be doing this replacement Saturday. Spasibo.

@RuvimAbaras

5 жыл бұрын

Lol, )

LOL!!! I nearly split my guts laughing at 1:00 "Brother, you're working faster then a Mexican!" LOL

Can I say TORQUE WRENCH 🔧

Are you russssian????

@RuvimAbaras

3 жыл бұрын

Lol

Didn't need to but a new cooler unless its was cracked, just replace the O-Rings also no reason to remove the the fuel rail leave it attached every move with the intake, holy shit whatever happened to torquing the oil cooler to manufacturer specs wow didn't torque the plentum or they intake. I would let this clown work on my Tonka truck's

Faster than a Mexican😂😂😂

D q

Im mexican thats racist

@RuvimAbaras

5 жыл бұрын

MrQpdo01 sorry

amateur

@RuvimAbaras

Жыл бұрын

🙏