Just successfully installed the DMX809S (I wanted wireless CarPlay so I splurged) with Maestro and using the Scosche kit. I can’t thank you enough for this video. You’re the man!

@emoorenc35

3 ай бұрын

I got the same head unit. Did you splice into the Sync unit as instructions said? Just curious if I need to do this.

Fantastic and most detailed I have seen. Can't wait to replicate on my 2012 XLT.

Any suggestion on where to screw the mounts to the stereo? I cant seem to line it up.

Does this and most aftermarket radios still have the ability to get Sirius radio?

Planning to install a new stereo to 2010 F150. Crutch field says that with one of the bundles they offer, the factory display screen above the stereo will only display “DVD”. Yours shows Apple Car Play. What step achieves this?

@TheBurnoutBroadcast

11 ай бұрын

That sounds like the PAC interface module, which doesn’t have full support for the screen. This is the iDataLink Maestro which does fully utilize the screen.

@tylerdillonjr2082

11 ай бұрын

@@TheBurnoutBroadcast Thanks Phil, for your feedback.

Just a quick question why you tap into the ODB

Do you loose the climate options on the sync original screen?

@TheBurnoutBroadcast

Жыл бұрын

They will be retained as long as the options are set correctly when flashing the module.

Where did you connect the reverse an parking brake wires. Location please.

@TheBurnoutBroadcast

Жыл бұрын

All done through the Maestro module, no other connections made.

Does the factory usb and aux chord still work?

@TheBurnoutBroadcast

Жыл бұрын

Factory USB will work if connected to the new unit as shown in the video, AUX will work if connections are made to the Maestro and it is configured correctly, or if the jack is rewired to the appropriate connector on the new unit and connected that way.

Just did the same setup with same radio. I cant get the voice, phone answer and hang up to work. The volume the seek button works what could it be

@TheBurnoutBroadcast

9 ай бұрын

Make sure to check the maestro settings for steering wheel controls when you flash the module, the values may have been changed.

Can you give part numbers or links for these items?

@TheBurnoutBroadcast

Жыл бұрын

All links are in the description.

Hey do I need to take the radio to get spliced at all?

@salvadorgonzalez1476

3 ай бұрын

Yea because the after market stereo needs more volts than the stock radio has. I tried to install my stereo and it didn’t turn on bc of low voltage

where did you put the maestro unit?

@TheBurnoutBroadcast

8 ай бұрын

It is directly behind the stereo, since this stereo is quite low profile it fits well behind it.

Is this the same for a 2013?

@TheBurnoutBroadcast

Жыл бұрын

Yes if the dash is the same as in the video. Some were this style, but most were the newer style with the small screen in the centre.

does the backup camera still work?

@TheBurnoutBroadcast

Жыл бұрын

This truck doesn’t have one, but it will work on trucks that do.

@marcanthony9963

8 ай бұрын

​@@TheBurnoutBroadcast Can you add a back up camera? That shows when's switched to reverse or just tap on screen? Just bought a similar truck and want to upgrade. Thanks great video

@TheBurnoutBroadcast

8 ай бұрын

Yes you can, the stereo has a yellow RCA plug on it for regular camera signal. For power just tap into the reverse signal so it turns on when in reverse, and set the stereo to switch to camera mode when in reverse.

Will this work for a 2010?

@TheBurnoutBroadcast

Жыл бұрын

Yes

Does it mirror his phone?

@TheBurnoutBroadcast

Жыл бұрын

It can mirror Android phones, but not iPhones.

Did the upgrade alow you to still have the use of the backup camera?

@TheBurnoutBroadcast

11 ай бұрын

Yes