2012-2020 FIAT 500 Dashboard (inner trim) removal tutorial
Автокөліктер мен көлік құралдары
This video is to show how to remove inner trim (colored section of the dash) of the dashboard.
If you would like to know how to remove the whole dashboard, please check out other videos.
Thank you and enjoy!
00:40 removing the climate control cover
01:47 dash insert screw location
04:00 removing the dash insert
05:54 reinstalling the dash insert
Пікірлер: 57
Had to reattach the door to my glovebox and wanted to confirm how to get this part off safely. This video did the trick, and i was also successful fixing the glovebox. Thanks!
@ChrisParkshooting
11 ай бұрын
So glad the video helped ya! Cheers!
Thanks for the video it helped , i used my fingers only on the black control panel with no damage at all.
Thank you very much for the excellent video! It helped me a lot to do it on my Fiat 500. Just a few details were different from my car. Overall, 99% as described in the video. Thanks a lot! Regards.
Thankyou so much this was so so helpful!
Thanks plan on doing this but had no idea.
Thanks Chris really good tutorial
Tanks a lot, your vídeo help me here in Brazil
@ChrisParkshooting
Жыл бұрын
Thank you!
Very helpfull. Thx alot.
Thank you
Tank you
Thank you so much! I was planning on doing a similar wrap too! Looks brilliant, 695 esque! Is that a stock instrument cluster?
How do you remove the main dashboard? Is it removable? I need to replace passenger airbag. thanks
How did you do to take off de bulbs?
Thank you very much for the excellent video!!!!!;-)
Hi. Do you know if it is possible to drive the car with dash panel removed? Planning on a wrap, but won't be done super quick. Thx
@ChrisParkshooting
8 жыл бұрын
im sure you can do it. you wont have access to sport, hazard and defrost buttons but you can drive without it. good luck!
I dropped a screw behind the AC control panel... Can someone help me? Do I have to worry if it stays in there?😩
Where did you get that carbon fiber dashboard?
@ChrisParkshooting
2 жыл бұрын
its a CF vinyl wrap. But you should be able to find the real CF dash insert pretty much all over internet. Thanks!
is it the same process with the new edition , 2017 and after ? because with the central control which is now electronic and not manual .. thank you for your return on the subject.
@ChrisParkshooting
5 жыл бұрын
im not too sure to be honest, but if you are asking for HVAC, its not possible as far as I know.
You said you dropped a screw behind the AC control panel. I dropped several light bulbs back there (for the ac control) how would you get back there?
@johannalay2738
3 жыл бұрын
have you been able to remove them meanwhile? did they damaged anything behind the AC control panel? I dropped two screws and I can't get them out😩😩 Please help
thank you, this was very helpful. How do we remove the other small piece on the left side?
@ChrisParkshooting
8 жыл бұрын
for non turbo, you just pull it off, for turbo cars, you need to pull the main cluster littl bit first and pull the left piece off. driver side doesnt have any screws.
Thanks so much for the video. Where did you get that dash panel?
@ChrisParkshooting
7 жыл бұрын
Thank you for watching! I wrapped it with the vinyl.
@quartercajun71
7 жыл бұрын
wow...looks good
How to destroy your dashboard in under 5 minutes. Great video, really.
@1nner.w0rld
2 жыл бұрын
how would this destroy ?
Do you have the tutorial for the backup camera? because I want to install one and I don't know how! thank you... PS: great video by the way.
@ChrisParkshooting
5 жыл бұрын
its nothing different than other cars. wire should be inside the roof liner and through the corner wire loom.
Thanks. And to remove the side corner (left side ventilation) of the dashboard plate ?
@ChrisParkshooting
Жыл бұрын
Thank you for watching! For the non turbo cars you just pull it off. And for the turbo cars you need to pull the main cluster little bit first and pull the left piece off. Please note that driver side doesn't have any screws. Hope it helps!
@fortiesfifties5420
Жыл бұрын
@@ChrisParkshooting Thanks much. Regards :-)
God you made that first section look hard. Just use your fingernails on your left and right hands simultaneously.
Very nice video. What about the small side part on the left?
@ChrisParkshooting
Жыл бұрын
Thank you for the complement! For non turbo cars, you just pull it towards you. For turbo cars, you need to first pull the main cluster a bit and pull the left piece off. Driver side doesnt have any screws.
@robbyvenetian
Жыл бұрын
@@ChrisParkshooting , thank you very much.
not sure how to do that.. you might want to take it to the shop for it.
That’s not the dash, that’s just a facia trim.
i have the Abarth
@ChrisParkshooting
8 жыл бұрын
so you either remove the center cluster or carefully pull the cluster from where turbo gauge is to make gap. then you will want to pull the left vent piece off. no screws.
@arta9769
8 жыл бұрын
thank you
Should re-title this , 'Partial dashboard removal' because it doesn't show about 80% of the work involved in removing the actual dashboard rather than just the facia panel.
My husband took if off with his fingers. Not hard at all.
@ChrisParkshooting
7 жыл бұрын
karen shubert assuming you are talking about the climate control plates. its not that hard to do but mine was kinda stubborn.
@ChrisParkshooting
7 жыл бұрын
thanks for watching!
@MrToonfish
5 жыл бұрын
Not everyone has your husband at home ! :-)
Trim removal tools are really cheap
PRY* not “prey”
@ChrisParkshooting
2 жыл бұрын
Thanks! 🤣
"Three screwdrivers," don't you mean screws lol
@ChrisParkshooting
9 жыл бұрын
yes...