thank you so much! very helpful! 2008 c350 sport here!

What year C300 do you own. My car had the square style head light bulbs. The plug is square and different…

@petespit9169

2 жыл бұрын

2010

H7 LED Headlight Bulbs fog light bulbs do i need an adapter plug or just unplug from the light harness

@petespit9169

Жыл бұрын

No adaptor plug. I had originally bought H7 but when I took them out they were H11….so I returned the H7 and got the H11. I think your manual should tell you which bulb size.

You show in the video LED H7 for a 2010 Mercedes C300 but when you click on the link you put it takes you to H11B. Is the H11B fit for the 2010 Mercedes c300?

@petespit9169

Жыл бұрын

They are H7’s that I installed. Maybe the seller doesn’t have them anymore so it’s defaulting to what they have. Search H7 and see who has them, H7 is the right fit. There is also a list in the manual of bulbs if you have a manual, you can double check there.

Link for the bulb led adapter to hold it in place?

@petespit9169

Жыл бұрын

Everything comes with the NAO’s. There is a ring adaptor that comes with the leds that gets held in place by the factory clips that previously held the halogen build in place. Once the ring adaptor is held in with the factory clip the led is put through the ring, push it through, it’s a tight fit. You don’t need to buy another adapter.

When you install, is there no error in the dashboard?

@petespit9169

Жыл бұрын

That’s right, no error on my 2010 c300.

Can this work with any LED H7 or you need CANBus to avoid error?

@petespit9169

2 жыл бұрын

I’m not sure if any other LED H7 would work. No separate CANBus used by me with the NAO EVO’s.

@cLaUdiALeE77

Жыл бұрын

I used a Decoder for my H7 LEDs headlights original when installing my H7 LEDs they would turn off almost immediately.. after installing the H7 Decoder,. It worked like a charm 👍

Idk some strange things happening, my w204 will only power on one side of the led low beam , the other side will just on and off few times and off, but if I do key on engine office both led low beam will turn on

@petespit9169

2 жыл бұрын

That is strange. They are the NAO’s? They are polarity sensitive, so if one is not turning on you can reverse the connector. I turned off my day time running lights and just have my lights switch turn to always on, not the auto setting. Mine is a 2010.

@MBZXZ

2 жыл бұрын

@@petespit9169 same here with 2010, it will both turn on if im in ignition on position and headlight on, but passenger side will on and off if the engine is running, i buy the cheap led on ebay to test if i like it or not. i guess i cant even drive with the led or have to price up the led

@patrickhenderson5865

2 жыл бұрын

Hi Zac, i have a 2008 c300, and my leds were doing the same on the right low beam, was wondering if you were able to fix it and did you buy the NAO's yet?

@patrickhenderson5865

2 жыл бұрын

@@petespit9169 Hi Pete was wondering if your NAO's are still going good? thinking of ordering them for my 2008 C300

@petespit9169

2 жыл бұрын

Yes, My NAO’s are still going good. They were about $35 for the pair on Amazon, and Amazon will take them back if you have an issue. It’s been about 3 years and I’m still good.

These LEDs leave a round black circle in the middle of the road because that tip of the LED light is too big in round