2010 / 2015 Mitsubishi Outlander Sport 2.4L Broken Starter Replacement
Жүктеу.....
Пікірлер: 21
@gg5842Ай бұрын
Thanks for leading the way on this. Just did my 2013 and I had doubts I could get it out without removing the manifold. Took me about 50 minutes to get that damn spade connector off but otherwise it was pretty easy following your guidance.
@kgautorepair3335
Ай бұрын
No problem anytime, please support your boy, by subscribing and like the video also, it helps our channel 🙏👍
@mikemurphy4573Ай бұрын
every video I looked at said that the intake manifold assembly needs to be removed. You're the only one that found a way to remove it without taking out the assembly. Thanks for this. It saved me a lot of time.
@kgautorepair3335
Ай бұрын
Thanks for reaching out, I appreciate you, please support your boy by subscribing, I will really appreciate that 👌
@marciaewell2661 Жыл бұрын
My Mitsubishi starter is fine. But I can't believe how crazy complicated they made near every repair on this car, and the astronomical prices for mitsubishi parts. They want $500 for an EGR valve, but I was able to clean mine up after extracting if out of the black hole it lives in. I think I am selling my cheap auction POS Mitsu Outlander Sport now that I got most the broken things fixed and it runs good. I admire your patience and thanks for posting repair videos.
@kgautorepair3335
Жыл бұрын
Thanks for reaching out,please support your boy,by subscribing to our KZread channel 🙏🙏
@Jswed1 Жыл бұрын
That’s my car!! He did an amazing job on this
@kgautorepair3335
Жыл бұрын
Thanks for reaching out, please like the video 👍
@750kev Жыл бұрын
Thanks bro, great vid. Mine just went today so i taking it out right now. Thanks for making the vid very helpful i appreciate it love & respect 🙏
@kgautorepair3335
Жыл бұрын
Thanks for reaching out,please support your boy,by subscribing to our KZread channel 👍
@firdausravindar977 Жыл бұрын
Thanks bro for sharing this valuable video on KZread. ❤❤❤😊😊
@kgautorepair3335
Жыл бұрын
Thanks for reaching out, please support our KZread channel,by subscribing and like 👍 the video so , it helps our viewers 🙌👍
@dong122810 ай бұрын
you're good brother,all i watch here in utube were they removed the intake manifold, how u do that.. my lancer same with that engine wont turning starter when i start, i suspecting starter..
@kgautorepair3335
10 ай бұрын
Thanks for reaching out,please support us,by subscribing 👌
@jamessarozek9364Ай бұрын
HELP NEEDED! I followed your instructions perfectly got the starter completely free however I can't get it out and down through the bottom of the car. Any suggestions would help immensely. Thanks
@kgautorepair3335
Ай бұрын
Thanks for reaching out, just take your time, play with it , little bit, you will be able to get it out, please support your boy, by subscribing, I will really appreciate that, good luck 👍
@F30Mir.8 ай бұрын
To let you know KZread shadow banned your videos I watched 3 videos before this but none explained like you only gonna watch black tutorials no not gonna lie
@F30Mir.
8 ай бұрын
I had to really scroll to find this video
@fckyoutubebigtechlibtards22 Жыл бұрын
I cant get the harness off the starter, not sure how you did it
@gg5842
Ай бұрын
Took me 50 minutes, just gradually worked it. Little release on the engine side, not the hard bump, just above the bump. That wire took me the most time.
Пікірлер: 21
Thanks for leading the way on this. Just did my 2013 and I had doubts I could get it out without removing the manifold. Took me about 50 minutes to get that damn spade connector off but otherwise it was pretty easy following your guidance.
@kgautorepair3335
Ай бұрын
No problem anytime, please support your boy, by subscribing and like the video also, it helps our channel 🙏👍
every video I looked at said that the intake manifold assembly needs to be removed. You're the only one that found a way to remove it without taking out the assembly. Thanks for this. It saved me a lot of time.
@kgautorepair3335
Ай бұрын
Thanks for reaching out, I appreciate you, please support your boy by subscribing, I will really appreciate that 👌
My Mitsubishi starter is fine. But I can't believe how crazy complicated they made near every repair on this car, and the astronomical prices for mitsubishi parts. They want $500 for an EGR valve, but I was able to clean mine up after extracting if out of the black hole it lives in. I think I am selling my cheap auction POS Mitsu Outlander Sport now that I got most the broken things fixed and it runs good. I admire your patience and thanks for posting repair videos.
@kgautorepair3335
Жыл бұрын
Thanks for reaching out,please support your boy,by subscribing to our KZread channel 🙏🙏
That’s my car!! He did an amazing job on this
@kgautorepair3335
Жыл бұрын
Thanks for reaching out, please like the video 👍
Thanks bro, great vid. Mine just went today so i taking it out right now. Thanks for making the vid very helpful i appreciate it love & respect 🙏
@kgautorepair3335
Жыл бұрын
Thanks for reaching out,please support your boy,by subscribing to our KZread channel 👍
Thanks bro for sharing this valuable video on KZread. ❤❤❤😊😊
@kgautorepair3335
Жыл бұрын
Thanks for reaching out, please support our KZread channel,by subscribing and like 👍 the video so , it helps our viewers 🙌👍
you're good brother,all i watch here in utube were they removed the intake manifold, how u do that.. my lancer same with that engine wont turning starter when i start, i suspecting starter..
@kgautorepair3335
10 ай бұрын
Thanks for reaching out,please support us,by subscribing 👌
HELP NEEDED! I followed your instructions perfectly got the starter completely free however I can't get it out and down through the bottom of the car. Any suggestions would help immensely. Thanks
@kgautorepair3335
Ай бұрын
Thanks for reaching out, just take your time, play with it , little bit, you will be able to get it out, please support your boy, by subscribing, I will really appreciate that, good luck 👍
To let you know KZread shadow banned your videos I watched 3 videos before this but none explained like you only gonna watch black tutorials no not gonna lie
@F30Mir.
8 ай бұрын
I had to really scroll to find this video
I cant get the harness off the starter, not sure how you did it
@gg5842
Ай бұрын
Took me 50 minutes, just gradually worked it. Little release on the engine side, not the hard bump, just above the bump. That wire took me the most time.