exactly what happend to my 05 aero . ive bought a second ecu and had it cloned /reprogrammed and mapped and so far so good . there are heat shield kits which stand it off the manifold and help with the heat cycling which seems to be the culprit but i intend moving mine to the slam panel by the radiator . there's a good YT vid on how to do this and its pretty straightforward. I also intend opening my old one and getting up close to see if it may be as simple as a dry joint as i found with mine it failed when in traffic and idling when the temp rises , i could drive 15 miles each way to work (motorway A roads with no fail)

For anyone watching, you can prevent this by just relocating the ECU. highly recommended as just replacing the broken one won't fix it for good, the new ECU will fail as well at some point if you don't relocate it. you can thank GM for this.

Thanks for the info

@axleung1

Жыл бұрын

No problem 👍

Thanks!

This is so helpful. Whenever I disconnect and reconnect the battery, I ALWAYS am unable to start the car... the battery shows it's charged. Sometimes I have to fiddle with the position of the negative cable and jostle things around before I'm finally able to restart the car. This time I simply cannot get my car with a charged battery to start. Any ideas? Update: Hours later I got the car to crank and start up after I cleaned the terminals with baking soda and gave it another jump start.... and when it started? My A/C, which had stopped working suddenly worked again... AND no more misfires... all codes have vanished from my obd. Does this sound like a bad ECU??

Huge black eye for Saabs.

yo bro i suggest getting a spacer kit for that ecu so u don't run into the same issue again

So the thing to try is disconnect the battery, then reconnect and see if all is well.

Hopefully it’s out on the road ASAP

@axleung1

Жыл бұрын

Thanks. Car is running great with new to me ECM installed and programmed.

Highly recommend getting these ECMs OFF the intake. They get hot on their own, bolting them to an even hotter engine...is GMs way of saying...FU

Where did you get the ecu? who did the programming?

@axleung1

9 ай бұрын

I bought a used one from eBay. I programmed it myself.

@steelydan133

5 ай бұрын

@@axleung1 Hello, how do you go about reprogramming it yourself? I have the same issue and not sure what to do next

@axleung1

5 ай бұрын

​@@steelydan133 kzread.info/dash/bejne/eqt7sMmtfK7FlNY.htmlsi=UfAwe-iBHI1QoZRa

@steelydan133

5 ай бұрын

@@axleung1 Thank you, very detailed video

Can youhelp me with my saab9-3 2.0t xwd my steering wheel controls does not work to change the settings do you have any idea why this is happening

@axleung1

10 ай бұрын

Not sure about this. Could be the switch?

@helm789

10 ай бұрын

Thanks for the information

@dzlsabe

10 ай бұрын

clock spring in CIM

@helm789

10 ай бұрын

2010 saab 9-3 2.0t I have a cim with the same exact parts numbers I have a tech 2im trying to learn how to add the cim I have no idea how to add the cim please help

@helm789

10 ай бұрын

I know I need security access I need help downloading the program 146 or 148

What code you get

@axleung1

Жыл бұрын

No codes at all. No check engine light.

@Keychaincustoms._43

Жыл бұрын

I have a p0606 any tips tht can help me my first syptoms i was driving one day in the morning pretty hot outside were im from n it was fine and little ltr in the drive my car just went limp at the light nd i stopped and turnded off to see wht was happening i thought a hise poped off causeing a vaccum leak looked to be fine checked coils they were fine it wasnt feel like the car was misfire bc i have experience with misfires with this car ..and i got back in my car to check the code and my car did not crank at all my lights and radio was just fine so I disconnected my battery terminals and rested the ecu and took off but when i started it it revs super high for no reson and then idles and the engine shake weird cause the car exsuaht sound choppy if that make sense and my codes from autozne scantool was p0606 code and a hard code that said throttle body acuator

@axleung1

Жыл бұрын

Sounds like your throttle body assembly has failed.

@Keychaincustoms._43

Жыл бұрын

@@axleung1 sounds like you were wrong it was the ecu thxs for tho I appreciate it

@axleung1

Жыл бұрын

Thanks for the update. This is good to know. Basically ECM failure is the likely culprit whenever reset of battery gets the car running again.