I love the fact you showed "What actually Happened" commend and thank you for your hard earned A++ on this Job. Well done!! Thanks!

@InsaneOil

6 жыл бұрын

Thank you for the comment, I hope it helped with your repair.

@DrPeppa

4 жыл бұрын

I would have cursed if that happened to me, I guess he just stays silent lol

I'm about to have my Sonata Transmission done at the dealership. I'd do it myself but lacking on time and tools. Great Job on this video, very thorough. It's given me good questions to ask the dealership when I decide to have it done. I want a complete flush, not just a drain/fill. Thanks again.

Based on a document available online for this transmission (A4CF2): "When new, automatic transmission fluid should be red, The red dye is added so the assembly plant can identify it as transmission fluid and distinguish it from engine oil or antifreeze. The red dye, which is not an indicator of fluid quality, is not permanent. As the vehicle is driven the transmission fluid will begin to look darker. The color may eventually appear light brown."

I am not a Certified Hyundai Technician or Expert on Hyundai Transmissions, but this video is proof that at least my 2008 Elantra does have a replaceable filter.

Thanks for the quick reply and info. I've been extremely frustrated with people telling me it doesn't have a replaceable filter when i know it does. Its nice to finally get some info that makes sense.

Thanks for showing "What actually happened". Saved me a mess!

Thank you for the information. I performed my first DIY transmission fluid flush today. Thanks in great part to this video. If I may just add, I noticed afterwards that it would have been better to leave the the supply port attached to the radiator, and to attach my drain hose to the output of the radiator instead. This would have flushed out both the transmission and the radiator. By attaching the drain hose directly to the supply port, whatever old fluid that was in the radiator got mixed in with the new fluid when I reconnected the hoses.

@InsaneOil

3 жыл бұрын

Agreed. Another method involves using compressed air to blow the remaining lines clear before installing new.

Thank you very much for fast response, you've been very helpful in my decision making. Have a great day!

Thank you for taking one for the team. Saved me a shower.

@InsaneOil

2 жыл бұрын

Thanks for the comment. Glad I could help.

Great video! Followed your step by step process, worked like a charm. Thanks so much!

@InsaneOil

3 жыл бұрын

Glad the video was helpful. Thanks for the comment.

I always replace the RTV with a real rubber gasket to make future changes easier.. I never had a leak.

thanks! it is clear now. I do however notice some one recommend not using synthetic transmission fluid. Hyundai recommends the AP-III kind of thing. Also, some one say it is not necessary to air-flush because some remaining of old oil could actually help the adaption (to the new oil you added). Since a air gun costs more money i guess i will drop that option..

In my humble opinion, an excellent (as in "very") video....THANK YOU!

@InsaneOil

4 жыл бұрын

Thanks for the comment. Good luck with your repair.

Would you please advise How can I change the transmition oil in turbine of elantra 2005 which the fillter is placed into the gears section. By opening the screw is placed in the bottom of tank, you can only change the 4 liter oil of tank and 3.8 liter of old oil is remained in gears section.

Extremely informative. Thank you!

thanks! I finished the oil change (finally). but I didn't open the oil pan. The silicon seal is too strong (maybe in 2010 model, it is stronger). and not suggested to be taken over. So i replaced the oil without filter change.

Every project is a learning experience, and you learn the best when something goes wrong. Thanks for watching.

Hello Jon. Could you please tell is the supply line going to the top of the cooler and the return to the gearbox is in the bottom, right?

gotcha , I know what you were doing, i enjoyed the video, that makes it all perfectly clear, thanks,for showing me how it's done !

Super helpful video, thank you very much.

The transmission cooler line going into the top of the rad is usually the transmission outlet line. This is true for my 05 Corolla and my 2010 Sonata. The Hyundai factory service manual allows you to drain the transmission empty as long as the engine is stopped immediately after the flow stops and never more than one minute total run time. I am still nervous about using universal transmission fluid but am considering Chrysler ATF+4 for my next exchange.

@InsaneOil

4 жыл бұрын

Amsoil Signature Series Multi-Vehicle Synthetic Automatic Transmission Fluid exceeds manufacturer specifications and is guaranteed by Amsoil. www.amsoil.com/p/signature-series-multi-vehicle-synthetic-automatic-transmission-fluid-atf/?zo=10458

Thank you for the video. Although this video is 9 years ago, but is good to share that any Asian car there is Auto Filter need to be replace.

Also try and put back in what your owners manual calls for which I think is sp3

any problems if we removed the whole ban off without removing the bolt first ??

A 2010 is still an HD like this one (2007 - 2010) and is identical. You should be able to get the filter from the dealer like I did. It is definitely a replaceable part.

great vid.....very helpful and will apply this new knowledge in the future.

Good video. Looks like a complete flush. I am surprised to hear that the Hyundai dealer merely back flushes, instead of replacing the filter. Is the filter that you used OEM, or aftermarket? The aftermarket one on Amazon's site, is half the price of the OEM, and comes with a gasket. I have a Sonata from the same year. There is no transmission pan, and the filter can only be replaced by complete disassembly of the transmission.

hi Jon, we didn't know how to open the hose clamp in your very first steps....Do you have any idea how to do it? thanks!

Which hose is which on the cooler? Top is oil into cooler and bottom is oil out back to trans?

So if fluid is still red, then it is still good and no need to change?Also can you recommend best OEM timing belt kit for 2005 Elantra - is Gates good?

fast forward to ~6:10 and i was rolling! or even earlier "you should probably wear gloves" FLOP, bolt comes off, ATF goes everywhere. reminds me of myself fumbling around with projects. very informative though, thanks!

Yes, that should work. You basically just want to push the fluid left in the line back into the pan.

hey jon im having a problem locating the oil supply line...i have the same car 08 elantra...is it the top hose or the bottom hose?

what is the automatic transmission filter part number for 2011 tucson?

nice 👌 work that's beyond perfect details. thanks for sharing this awesome video 👍

@InsaneOil

3 жыл бұрын

Thanks for the comment. Good luck with your repair.

hi, what is the speed or rate you fill the transmssion fluid while evacuating the fluid on other side.

That's why our experience is our best teacher

@InsaneOil

3 жыл бұрын

Life lesson: If it happens once...consider it education. If it happens again...you have a problem.

Ineed know the name of Auto gear box installed in Hyundai Elantra HD such as 01m in skoda

Apologies if this was asked already, but is the service of a 2003 elantra similar to this video? Thanks.

one question.. where did you buy the transmission filter?

One question, are you located in Canada? I'm asking because I've researched everywhere and the 2001-2010 Elantras (US) don't have any transmission filter. I know the ones from Europe do, not sure if the Elantras from Canada have a transmission filter.

What is the size of the hose you pushed on to the hard line while flushing?

Do not use RTV silicone on the gasket. It is a bad idea because people usually use too much and when you tighten it down it squishes out the sides and the hardened pieces get inside the transmission and do nothing but clogs the filter. If you have to use something Use red high tack spray it’s thinner and pretty effective. Additionally hand tighten all of your bolts, especially on the filter because you could strip out the aluminum threads pretty easily if you use powered driven ratchets. Do not reverse flush at the dealer rather remove the pan and the filter And clean it out. Anyway, great showman keep on rocking.

@InsaneOil

5 ай бұрын

Thanks for the comments and tips...always appreciated.

Great lecture! Thanks a lot!

and when you mean push air in one supply line, will oil get pushed away and collected in the other end of the supply line, or collected on ground (where the transmission filter is?)

Same process for a 5-speed?

Now thinking about it, you may waste more fluid but I guess running the touque converter oil thought a new filter may be going backwards a little.

I did the flush following procedures except I directly attached the hose to cooler line which send back the cold fluid to transmission and replaced the gasket with rubber gasket which came along with the filter. Everything looks normal and shifting is better than before. The oil level is little bit low, need to buy the same oil and put it.

@johnevans5110

6 жыл бұрын

bsy3ful Which line was that sending cool oil back to trans.? Top hose or bottom hose on cooler? I would of thought bottom?

What I have is a 2010-Elantra. I checked its transmission cooler hose, it has some (7.6x2s) number on it. I am not sure is it compatible with 1/4 inch extension hose or do I actually need to get it from dealer. My impression was 2010 and 2008 Elantra are the same.. Which one did you get?

I have a 2010 elantra and It seems that trans filters are not available for this application i.e.it is just a screen that requires cleaning and i haven't found a manufacturer that offers a replacement filter. At the same time, Jon's video features a 2008 elantra and did replace the filter. Is this a difference in the model year, or can you use a cleanable screen or a conventional fiber filter ?

I loved the part where you spilled the transmission fluid tray as you were taking it off ;-)

Why do all the parts stores say the filter is not available for my 08 elantra because it's supposedly not serviceable. Are there two different transmissions for an 08 elantra?

I had the tranny oil changed at a CAA garage. Oil is leaking from around the drain plug. They said they would have to replace the gasket but it doesn't look like there is a gasket around the plug. Looks to me like it was over tightened and stripped the threads. Mine is a 2009 Elantra. Do you know if there is a gasket around the drain plug.

We can also , empty the oil in the torque converter by suction machine... isn't that ?

I have a 99 elantra, if I just drop the trans pan, how much fluid comes out ? just doing a drain an refill only . has 61,000 miles on it , this is the 2nd time im doing it but never removed the pan .

I have a 99 elantra 2.0 automatic, with only 41,000 miles on it, i changed the fluid at 30,000 miles, i want to drop the pan to replace the oil temp sensor for the trans, can i run valvoline fully synthetic SP lll trans fluid in it ? not flushing the system. let me know, just dont want it to slip

is this the same for a 99 elantra ?

What's the size of the drainage bolt?

What is the id of the line/hose you hooked up to the supply line that went into the bucket?

The Federal Trade Commission (FTC), the nation's consumer protection agency, says that it's illegal for a dealer to deny your warranty coverage simply because you had routine maintenance or repairs performed by someone else.

@allergictostupid2410

3 жыл бұрын

They can deny your warranty coverage if you cannot provide proof that the maintenance or repairs were completed. Normally you'd need a receipt of the business that performed the work to show that it was completed.

@InsaneOil

3 жыл бұрын

​@@allergictostupid2410 Agreed, you would need some type of documentation that you actually did what you claim was done.

great video thank for your time doing it

@InsaneOil

5 жыл бұрын

Thanks for the comment. I hope it helped with your repair.

Good video. Very detailed. Thanks

I would say if you are capable of doing the pan and filter the supply and return fluid should be no problem, you may have already done the hard part go ahead and get it done

I'm flat rate I don't have time to toque the pan down 1/4 ratchet til the wrist pain comes in done !

Hey Jon, Thanks for the great video! I'm about to take on this project myself in a day or two. Do you recall which hose (the one closer to the top or bottom of the engine) was the supply line? Also, do you have any recommendations for clearing the transmission fluid from the oil cooler without having access to compressed air?

@notcharles

5 жыл бұрын

m money is on the upper connection!

@mikefennema5561

4 жыл бұрын

Usually the top hose at the rad is transmission outlet, rad inlet.

Nice video mate

Excellent video , Thanks

Buen video..¿No utilizo el ATF que el fabricante indica?

@InsaneOil

6 жыл бұрын

El fabricante ATF funciona. Si quieres lo mejor, utiliza Amsoil. www.amsoil.com/shop/by-product/transmission-fluid/automatic/signature-series-multi-vehicle-synthetic-automatic-transmission-fluid/?zo=10458

I had the same issue. From my understanding, Hyundai does not want it's mechanics to drop the pan during a routine transmission service. Instead they use the "backflush machine" method. The Hyundai mechanics I talked with prior to this video even said that Hyundai doesn't state the torque specs for the transmission pan because they don't remove them. I found the transmission filter through Amazon. The manufacturer is Beck Arnley. I called Beck Arnley and they provided me with the specs.

@ShowMeWhatINeedToKnow

8 ай бұрын

What are the specs?

he referred to the supply line , do you think he meant the discharge line from the transmission that supplies the cooler , is that just obvious ? I mean I think it is the transmission discharge that is pumping into the the plastic reservoir !

From the Federal Trade Commission's website - An independent mechanic, a retail chain shop, or even you yourself can do routine maintenance and repairs on your vehicle. In fact, the Magnuson-Moss Warranty Act, which is enforced by the FTC, makes it illegal for manufacturers or dealers to claim that your warranty is void or to deny coverage under your warranty simply because someone other than the dealer did the work.

@notcharles

5 жыл бұрын

Yeah, more G D Government regulations destroying small business in America! Trump'll eliminate that reg!

Thanks for thorough instructions Jon 🙂 Remember that God loves you Jon, be sure to follow His instructions, ok? Thanks again for your help 🙂

@InsaneOil

3 жыл бұрын

Thanks for the comment. Good luck with your repair.

When sending air through the trans cooler, it might be better to send the air opposite of flow in case theyre any loose particles in the beginning of the cooler. Great vid tho

@InsaneOil

2 жыл бұрын

Agreed. Always good to get as much out as possible.

Great vid, hey would it better to do the flush before changing the filter?

@notcharles

5 жыл бұрын

No, if you replaced the pan, then flushed as shown, you would have to 1. Drain the new fluid, 2. lose the fluid collected in the pan (when) 3. Remove(ing) the pan (to) 4. replace the filter, (then) 5. redo(ing) the gasket (before) 6. Replace(ing) the pan (then) 7. adding new fluid (to proper level) - right?

Inline derale screw on filter is probably a good idea

I don't believe in using aftermarket flushes. It just introduces foreign chemicals that might not be completely removed from metals and passages. No owners manuals recommend using flushes. Changing ATF regularly is all that is needed.

@nameless-og

5 жыл бұрын

The best flush is just new fluid really... It already acts as a cleaner. Kind of why I just like the more frequent drain and fill approach more than full replacement.

@allergictostupid2410

3 жыл бұрын

@@nameless-og I agree. As far as I'm concerned, draining and filling once in a while is the way to go. Nothing wrong with changing the filter once in a while either.

awesome thanx jon great vid

I have a 2007 hyundai avante (4-speed automatic, imported from korea)... 76000km almost done without changing transmission oil ... most mechanics say that flushing the system out will destroy the transmission and it shouldn't be changed also they say that u need to change the oil when u need to change the whole transmission .... i watched this video and I really like the way u flushed the system out but I need u're help to know the correct answer about transmission oil and what to do !!?

@qaismohammed6780

9 жыл бұрын

thank u so it's better to go and change the transmission oil ASAP !

Auto Transmission: Eyebolt tightening torque: (This is the fluid fill point) 34.3 ~ 44.1 N.m (3.5 ~ 4.5 kgf.m, 25.3 ~ 32.6 lb-ft) Oil level plug tightening torque: (Note, there is no dipstick) 34.3 ~ 44.1 N.m (3.5 ~ 4.5 kgf.m, 25.3 ~32.6 lb-ft)

@RepairRenovateRenew

5 жыл бұрын

Even though there's a dip stick, ya dipstick

Is the residual line connected when your flushing the old fluid out? I’m doing a flush on my Hyundai right now.

@InsaneOil

Жыл бұрын

One line needs to be disconnected to dump the old fluid as you are adding new in (while it is being pumped through).

I need a video for the next generation Elantra uhhhhhhh!

Great video.

Looking for help on changing the A/T fluid on a 2009 Hyundai Elantra Touring (hatchback). Can I use this video for that car?

@InsaneOil

5 жыл бұрын

The procedures should be similar.

Thank you very much

probably the inner diameter is not that critical as long as it can expand and fit into the metal connector..

Do you have to select RND while flushing to flush out the fluid from the torque converter, or is there always a flow of fluid between the torque converter and the gearbox when in Park ?

@InsaneOil

4 жыл бұрын

There should be a constant flow of fluid, even when in Park.

Any thoughts about using rubber gaskets instead of the RTV? My filter came with one and I've never had any issue with rubber gaskets before but this car may differ.

@atxjax1

9 жыл бұрын

Awesome thanks. Should I keep the same torque spec? 90 in-lbs?

Nice video

How many capacity of automatic transmission fluid of elantra 2007?

@InsaneOil

Жыл бұрын

2007 Hyundai Elantra has a capacity of 7 quarts. www.amsoil.com/lookup/auto-and-light-truck/2007/hyundai/elantra/2-0l-4-cyl-engine-code-bd-dohc-b/?volume=us-volume?zo=10458

Thanks for the great informative video. I am an "old school" mechanic and I work on/and fix all of my cars myself. My wife has a 2008 Elantra and 30K miles is the recommended trans fluid change. Your video is excellent and the only critique I have is: will Hyundai honor their warranty if you don't use the Hyundai recommended SP-III Trans oil?? Keep up the good work! -Colly

@notcharles

5 жыл бұрын

How would the know what you put in the tranny?

What would make it shift. From of to 3rd and stick on its own?

@InsaneOil

6 жыл бұрын

Prior to completing this repair I experienced the vehicle shifting erratically and slipping, specifically when passing another vehicle on the highway. Poor shifting can often be a result of depleted transmission fluid qualities.

Is this the same on a 2006? Do the 2006 have the same filter

@InsaneOil

2 жыл бұрын

The 2006 should be very similar.

Some the mechanics is saying dont Flush the Oil but you flush here so which one to Follow? Shall we flush or no?

@InsaneOil

4 жыл бұрын

I don't recommend using a "Flush Machine" AKA "Back-Flush Machine"...I do recommend using a Flush Product, Dropping the Pan, Replacing the Filter, and cleaning the magnet and pan.

Me encato tu video poco entendi porque no se ingles pero me diste una idea

@InsaneOil

4 жыл бұрын

Me alegra que el video haya ayudado. Buena suerte con tu reparación.

..Thanks. Another question: where did you get the compressed air gun?

@ronwalker5480

5 жыл бұрын

Harbor Freight

I am planning on doing this to my girlfriends elantra- but I don’t think it has ever been done to her car. The cars 14 years old and I have heard that if you do a complete flush on a vehicle that hasn’t had it done before it could damage the transmission. Would you recommend a flush or just a change in my scenario?

@jonothejester

Жыл бұрын

I recommend a flush if you are doing it as shown in the video where you drop the pan and replace the filter. If you just dump and fill you are leaving all the sludge inside of the tranny from the last 14 years (not to mention the filter wouldn't get changed). I don't recommend using a "back flush machine".

@unh0lyher0

Жыл бұрын

@@jonothejester hi Jon thanks for reply, I have a new oil filter and 3 quarts of spIII for the change. If I introduce all new fluid to the tranny would it not possibly create issues? I have been watching videos and if you just do a change you only remove about 40% of the fluid from the tranny with a change opposed to 100% with a flush. Her elantra only holds 7quarts of fluid and if I just do the change 40% of that is 3 quarts. If I change the filter and just do a change would it not work better than a complete flush?

@unh0lyher0

Жыл бұрын

Transmission filter*

Is this the same process for a Hyundai Sonata 2009?

@InsaneOil

5 жыл бұрын

Process should be very similar if not identical.

thanks, Jon,

Trying to find out what kind of trans oil I need in an 2009 elantra

@InsaneOil

6 жыл бұрын

For automatic transmission - www.amsoil.com/shop/by-product/transmission-fluid/automatic/signature-series-multi-vehicle-synthetic-automatic-transmission-fluid/?code=atfqt-ea?zo=10458 For manual transmission - www.amsoil.com/shop/by-product/transmission-fluid/manual/manual-transmission-and-transaxle-gear-lube-75w-90/?code=mtgqt-ea?zo=10458

@kalani1987

5 жыл бұрын

I would use a SPIII synthetic fluid like Valvoline TransMax or Castrol Multi-Import.

HI WERE CAN YOU HUY THE AMSOIL TRANSMISSION FLUID FROM THATS ALOT

@InsaneOil

4 жыл бұрын

You can purchase Amsoil Synthetic Multi-Vehicle Automatic Transmission Fluid from: www.amsoil.com/shop/by-product/transmission-fluid/automatic/signature-series-multi-vehicle-synthetic-automatic-transmission-fluid/?zo=10458 If you are wanting to save about 25% on every product on the website you can register for an account here: www.amsoil.com/offers/pc.aspx?zo=10458 Just click "Join Now"