Ex mechanic, rider and ocd like you wouldn't believe! your builds are some of the cleanest most in depth I've seen online some great work man sending some appreciation from the other side of the pond 🇬🇧

@MotoScrub

Жыл бұрын

Appreciate the kind words! Cheers!

@raulmartinezmunoz8913

Жыл бұрын

Esta muy bien 👌

@mysteurs5609

Жыл бұрын

On on peut trouver ce kite déco svp ?😊

@falconx5744

6 ай бұрын

Lol you sound like me. OCD hard 🤦🏻‍♂️ but I wouldn’t have it any other way. Retired mechanic but still restoring my own cars and motorcycles, about to but myself a 2007 yz 250 thats low hours, but im sure il strip it and well.. you know how it goes 😂 from Australia 🇦🇺 buddy Happy New years!

Extremely clean job !🔥

And I thought my low hour 07 YZ250 looked good 😂. Your build is amazing!

Потрясающая работа, браво ребята!

Man nice video! Building bikes is so rewarding, I just rebuilt an 02 CR250 and enjoyed rebuilding it just as much as I like to ride it!! Me and that vapor blaster would be best friends if I had one!

Still riding my 07 and loving it.

I just rebuilt a Pro Circuit suspension-ed (front and rear) 2003 YZ250. Love the power of YZ 250s.

High quality workmanship! You are a true craftsman! 👍 Very nice!

@MotoScrub

Жыл бұрын

Appreciate it! Thank You!

Awesome video!!! You make it look so easy. You have probably forgotten more than I will ever know. Fantastic job!!!!

@MotoScrub

Жыл бұрын

Thank You, I appreciate it! haha

amazing build man, love the oem and a bit of the aftermarket style

@MotoScrub

Жыл бұрын

Glad you like it! You have good taste. hehe

Great vid , no one was talking the whole time and it was at perfect speed to watch and not get bored , subtitles were nice touch too , I watched this while I ate thanks bro

@MotoScrub

11 ай бұрын

Haha awesome. Glad I could make your meal that much better! 😁🤘🏻

I just went through my ‘16 with a comb and yours makes mine look like its been thrashed with that vapor blasting. I would love one of them some day for builds.

Wish kids these days understood how having something simple and clean is the way it should be. Not all the over the top flashy garbage.

@marvinmartian3671

2 ай бұрын

To each there own man alot of people enjoy building bikes makes them care more about it instead of just beating the crap out of it and destroying it

The colors scheme is amazing; the rims, plastics, pipe, triple clamps, and bars on top of all that perfectly restored parts look crazy good! Good job man, love the content👍

Best yz build on KZread period!

that was amazing. keep up the great work!

Love the build 🤙

Una belleza de restauración y excelente moto YZ250

super clean , bike build and video!

Beautiful mate! Awesome job 👌😍

You are a great mechanic! 👍

@MotoScrub

Жыл бұрын

Thank You!!

Outstanding!

Beautiful, Beautiful bike. Your work is exceptional!!!!!!!!!

@MotoScrub

Жыл бұрын

Thank You!!

Fender’s waggin’, she’s a happy girl!

Awesome, bravo what a clean work ...

I’d kill to find a channel that did full blown video tutorials on all things dirt bike mechanic related. Like how to rebuilt a top end, carb, pulling bearings, etc. with explanations on why you do certain things etc. Would be so helpful

@cw3728

7 ай бұрын

I future say.. I'd love to find a channel. There is no need to kill anything

@islanddoggear

7 ай бұрын

@@cw3728 it’s a figure of speech, but I’d ACTUALLY kill to make you stop talking.

@cw3728

7 ай бұрын

@@islanddoggear I understand American, but I make you sound feral and savage like a south American! Just trying to teach you a bit of etiquette, you'll go further.

So clean!

Thật vui khi được xem sự phục hồi chiếc xe một cách thận trọng, cảm ơn bạn

First thing I noticed is the darker blue rims, awesome choice 😎

@MotoScrub

Жыл бұрын

Wow, good eye!

Great Job dude....that' s awesome.....

Good job! It was my pleasure to watch this video! Regards from Germany

@MotoScrub

Жыл бұрын

I'm glad you enjoyed it! Cheers!

Daamn what a clean build, well done🤘

@MotoScrub

Жыл бұрын

Thank you, Glad you liked it! 🤘🏻

@adamhill2788

Жыл бұрын

@@MotoScrub I'm going to look at a 07' yz250 that's all OEM and never rilly had maintenance done to it...$4K for the bike then gonna strip it down/rebuild n rip to 99% of your build n parts🤘

@adamhill2788

Жыл бұрын

@@MotoScrub any pointers on the 07' tear down/complete rebuild to be aware of ??

Nice job man!!! A bike like that in Brazil would cost a fortune R$$$$$$$

Very good mechanic

@MotoScrub

Жыл бұрын

Thank You! 🙌🏻

Very nice !!

Great build !!!

@MotoScrub

10 ай бұрын

Thanks!! 👊🏻🙌🏻

YOU JUST GET POEPLE WHO CAN DO THE JOB..... REALLY RESPECT 👌👌👌👌💯💯💯💯👍👍👍👍

@MotoScrub

Жыл бұрын

Appreciate it! Thank You!! 👍🏻🔥

Sharp. Nice ride briggity braap

my dream !!!! nice job

Sweet nice job!👌✌️

I can't believe how incredibly bad ass this is....extremely nice e job man. ..

@MotoScrub

8 ай бұрын

Appreciate it! Thanks!! 🤘🏻

wow so clean

My therapy no doubt

Im about to find me a similar year/frame of yz250 and do a stock-mod build...only new bike on my local yamaha showroom floor is the yz250X...super sick build you did🤘

BEAUTIFUL BEAUTIFUL 😊

Amazing. .good job.....

Nice work 💪

@MotoScrub

Жыл бұрын

Thank you very much!

amazing!

Wonderful

Awesome❤

Nice

Amazing

You just got a new sub! Great content and high quality! Do you vapourblast your engines fully assembled? If so, what do you do to prevent any media to enter the engine. I see this topic all the time on forums and fb. Greetings from norway.

@MotoScrub

Жыл бұрын

Thanks for the sub, glad you enjoy the content! ^^ Regarding the motor blasting. Yes, it was blasted whole. I take great care in blocking all the areas that can get media/water before blasting. If you do it right it can be done!

Good nice

Fire...🔥🔥🔥🔥🔥🔥🔥🔥👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻🤞🤞

Insha Allah suatu saat nanti gw juga bisa beli ntah kapan

piękna sztuka

Muito bom , eu aqui do Brasil me inspiro em você

Top de mais parabéns 🎉

Absolutely love the build! great job on it. I'm very curious though. Did you vapor blast the engine while assembled then just replace the top end? I reached out to a few places to see if it could be done when I was building my rm and they all refused. Is this something you've had good luck with? Again, great work!

@MotoScrub

Жыл бұрын

Thanks for watching! Yes, the engine was first blasted whole. Then the top end was done afterwards. Have blasted many whole motors, it is critical to block/mask all open areas before blasting.

WOW!

Thats a sik bike. I'd kill for the shop though.

Awesome work!

@MotoScrub

Жыл бұрын

Thank You! 🙌🏻

Hey! can you tell me what are the wires/sensors coming from the carburator of the yz?

clean build , new subscriber here/

@MotoScrub

Жыл бұрын

Thank you for the sub! Hope you enjoy the videos 😁 🙌🏻

Mantap

Hello, I have mounted a fatty and shorty fmf exhaust on my yz 250 23, my question is is it protected with the 50 n3ew pos 2 series carburetion and 178 main jet, or should it go up to 180, thanks in advance

awesome job really enjoyed the video. How many hours would you say total?

did you vapor blast motor while it was together ?

Can someone tell me what year the plastics are meant to fit? I have an 07 that I need to order plastics for and I’d love these.

I have 07' yz125 I was wondering what year plastics are

❤

Hi. Why do you change the piston? Thanks

what are those electronic cables on the carboretour?

I wished , theres a man who sent me like this beautiful dertbike....I wish........

I've got a '02 426 i want to rebuild like this but its sooooo daunting when the most you've ever done is replace a carb on a lawnmower...

@gabekenyon4882

3 ай бұрын

It's pretty easy just take your time and use the manual

bro what tool did you use to remove that bearing sleeve?

What is name of the shock oil you are using and what is its viscosity level bro From indonesia

hello where can i find the wrench you used to remove the steering bearing? Congratulations for the video. Greetings from Italy

@MotoScrub

Жыл бұрын

Motion Pro - Steering Stem Tool I highly recommend it! Makes the job so easy and painless 👌🏻

Love the build!! Where did company did you get the decals from? Much better quality than what I've seen. Mahalo!

@MotoScrub

11 ай бұрын

Appreciate it! The graphics are Yamaha OEM 👍🏻

❤❤❤❤❤

What do you use to vapor blast

CR 250 next plss

Very cool build man loved the video, just a question, what year were the plastics you used and can I use any year for my 09’?.

@MotoScrub

Жыл бұрын

For your 2009. As long as you use the updated airbox (2015+) you can use any 2015+ plastics. Rear fender, side number plates, and shrouds. Front fender and Front number plate were Cycra restyle plastics.

@jessieaguilar1205

Жыл бұрын

@@MotoScrub what about an 05 does that work too?

Damn bro I don't even want to know what you paid for the Yamaha hardware. Usually go to the hardware store. I went to the dealership to get clutch basket bolts for a Fireblade. They were 4.95 a piece and not even hardened?!?!!?🤣🤣🤣 Took my ass straight to the hardware store. Even if I got it I'm not giving it to them. Highway robbery. I understand why you do it, just laughed out loud when I seen it all sitting there in a pile. The first question I asked myself was "how much did that cost"!? Excellent work buddy. Love to see other human beings take the time in what they do and do it right

@MotoScrub

Жыл бұрын

The bolts are from "Spec Bolt". They make model specific kits for engines, body work, etc. They even have different finishes! Much better than the mismatching hardware store bolts 😜

When doing the forks was you not worried about mixing from left too right with some of the internal components?

@MotoScrub

Жыл бұрын

The left and right almost always have some kind of small knick or something distinguishable. Even if you did switch them though, the internals are the same left and right. 👍

should've left that Wiseco piston in it. Forged pistons are are far superior to the junk OEM ones

Good job👍 . The wiseco piston why Changed with original ?

@MotoScrub

Жыл бұрын

Customer had just purchased the bike and did not know the condition of motor. Bought new parts for piece of mind 👍🏻

What motion pro tool steering removal and install kit was you using?

@MotoScrub

Жыл бұрын

- Motion Pro Steering Head Bearing Race Driver - Motion Pro Steering Head Race Puller 👍🏻

Nice work. Bet that cost a few bucks.

Gg brow

How much did you buy it? How much did you spend on it? And how much is it wort now? Ples i will be relly happy if you can anser me this questions

What solvent did you use to clean the frame it came out amazing?!?!

@MotoScrub

Жыл бұрын

The solvent is any normal cleaning product, nothing special. The frame looks the way it does because it was vapor blasted 👍🏻

What were you doing at 4:33 ?

Jealous of that bee

Either a Yamaha yz125 or a yz250? Please let me know what is the quotation and the price

how do you know all of the rubber seals to get when rebuilding the forks and rear shock? is there a kit sold somewhere with everything? preferably kyb brand

@MotoScrub

Жыл бұрын

What bike do you have? Yes, there are rebuild kits that will included the parts you need for a rebuild.

@nastysoda9212

Жыл бұрын

@@MotoScrub 2014 YZ250 2 stroke, I need to do the forks.

What was the setup you used to pull the steering head bearings?

@MotoScrub

Жыл бұрын

Motion Pro - Steering Head Race Puller Highly recommend! Makes it so easy..

Great work, What rear brake spring are you using?

@MotoScrub

Жыл бұрын

Thanks! "Fasst Company" rear brake return spring. They offer different colors too 👍🏻

how much did u buy the bike for? and how much did the rebuild cost?