Thanks for video, just did my starter clutch on my son grizzly, it was a huge help thanks. For those reading for info on what might be wrong with your bike, the started motor works fine but only will start the bike every so often, the starter clutch is a $30 part on eBay it has spring which is over come when turned by the starter, over time it craps out. This video helped me identify that’s what was wrong with my bike. Got the part and was able to swap it over in a couple of hours. It’s so easy to think it’s the starter motor When it’s this cheeky part. Cheers again for helping others out.

@CovidFart

2 жыл бұрын

So to replace the starter clutch that means you don't have to mess with the bearing at all right? Unless you're changing that gear?

This was the first person to talk about the washer that goes between the large gear and the one way starter clutch. I looked at the schematic. I was going crazy. Could not get the thing to work right. Watched this vid and THANK YOU very much. Got it right.

Great video! If you freeze your bearings before you press them in they shrink enough to make pressing them in MUCH easier.

Nice and honest! Thanks for the useful video. Refreshing to see folks that have a good advise.

Thanks for the video, lots of info that i needed b 4 diving into the unknown. Keep wrenchin!

Great video sir thanks for sharing and as a shade tree mechanic this is what we do tear it apart and try to figure it out which you did and even better you fixed it and shared many thanks

I have an '89 Yamaha Breeze with the same issue. The motor looks identical. Thank you for making this video!

@mrbassic4

7 жыл бұрын

acleast 11 Thanks for watching! Hope the video helps and good luck!

@rossirp1179

3 жыл бұрын

Idling too high will cause it to grind gears and not engage.

Great video. This engine looks exactly like the quad that Yamaha replaced with this it’s called Breeze 125. The engines look identical. Great video. I have parts ordered for the exact same job on my 03 Yamaha Breeze 125. Awesome quads 👍

Took mine all apart and manual freed up the starter clutch and lubricated it. Haven't had any issues since

@CovidFart

2 жыл бұрын

So does that mean you didn't have to mess with the bearing at all?

@burnheretic3950

2 жыл бұрын

@@CovidFart I think I sprayed some lubricant but aside from freeing it up didn't do anything. Granted my machine had sat for years. If yours is regularly used it may need more attention. Just take it apart and check it out. They are pretty simple.

Thanks Bud!

They're called snapring pliers. Thanks for the video!

Is this the same as the Yamaha vity 125cc 2011

respected i am not a mechaic yes boss i feel u same issues with my bike also u hit it on nose thsank u boss for ur video

Thank you 🎉

I had an 05 givin to me that starts and runs great but when you put it in gear it makes a grinding noise like the gears are grinding coming from the clutch case and it loses momentum as if the clutch or belt is slipping i pulled the cover and none of the gears seem to have any damage or markings and the belt seems fine so im curious if anyone else has experienced this or knows what the issue may be before I go buh another clutch just doing discovery work? Any input is much appreciated.

@mrbassic4

4 жыл бұрын

James Gray inss as m not sure. Sounds like a different problem than what I experienced

@rkhan2mexico

Жыл бұрын

Great videos I cannot put the belt Please help

I have the issue of my clutch being burnt out, I can not find it anywhere in eBay, in the UK, would anyone have any idea where to find the first half like in this video?

@mrbassic4

6 жыл бұрын

www.ebay.com/itm/Starter-Clutch-Gear-Gasket-for-Yamaha-Breeze-Grizzly-YFM-YFA125-YFM125-YFA125-/231726414706?hash=item35f3f87b72:g:j7EAAOxySoJTUaAO&vxp=mtr

What exactly was wrong with the clutch? Since you started mid repair, I don't know what your symptoms were. My starter is spinning, but not engaging. Great vid btw.

@angbry8305

4 жыл бұрын

My starter spins doesn't engage either. I'm still trying to get the case off. I can't figure out what's holding it on. Maybe one of those hidden screws that needs a super long driver?

@aweome7791

4 жыл бұрын

Yea that would be the starter clutch not working correctly, you'll need to replace it

Hey i bought a grizzly 125 for cheap bc it wouldnt move so the nut on the sheave was loose and the washer with the hooks was ruined i was wondering if the sheave is suppose to have splines in it or a bearing it seems like something is missing on mine

@mrbassic4

4 жыл бұрын

Bob Hollis not sure. I’d go to partsfish.com and look at the schematics

@bobhollis426

4 жыл бұрын

mrbassic4 ok thanks I appreciate it

So if I want to replace just the starter clutch and not everything else I wouldn't have to mess with the bearings at all right? Also is the starter clutch serviceable

@saulgoodtrio2570

2 жыл бұрын

The starter clutch I purchased did not come with the bearing rings so I had to move from old to new. You don't need to replace the sheave (I broke mine) and the idler gear, but everything on mine was very worn and since I was in there anyways figured I'd just get it done. I do not know if the starter clutch is serviceable.

@CovidFart

2 жыл бұрын

@@saulgoodtrio2570 okay cool thank you for the response

is it normal for the idler gear to be wobbling around, or should it be snug and have little to no movement? mine is very loose and isnt engaging properly when i go to start it.

@mrbassic4

3 жыл бұрын

Wobbling no. Maybe a very little play in it but no wobbling. I’d replace that all together.

@JT.559

3 жыл бұрын

@@mrbassic4 I have these two videos kzread.info/dash/bejne/qXya07xtcamwaNI.html& kzread.info/dash/bejne/fJanp7RtZbKfiM4.html The teeth on the gear look good, and so does the shaft. what would i have to do if the slot on the crankcase is worn out where it wont hold it in place?

Mine got gear box cancer and died 😢

Clutch torque spec??

@mrbassic4

3 жыл бұрын

I personally do not know. Sorry