If you have the stock exhaust manifold from the factory, the nuts that go with the studs for the catalytic converter are 16 mm. Mine was already an aftermarket replacement which is why I used 17 mm for mine. Just heads up! 😎

@niikey5168

2 жыл бұрын

hi i have a 2014 altima the P0420 bank 1 is showing but i don't see and links and it's drivings find i took it to the shop they told me i had a whole in the honeycomb i should get it replaced? or do you think it's something smaller

Great video... Perfection... thanks for including all torque specs n socket sizes

@TrickShiftGarage

2 ай бұрын

Thank you for the kind words. Let us know if you have any questions. Thanks for watching and commenting! 👍

Yo trick I just put on a new exhaust manifold. Hopefully it gets rid of my P0420 code but at least she's running. I had very little prior experience but just followed your video step by step. Really appreciate it. If it works it'll save 1300 bucks

@TrickShiftGarage

Жыл бұрын

That's awesome bro! I hope the code goes away for good. Glad you found the video helpful. Thanks for watching! 👍

@19junior82

9 ай бұрын

Did it work?

@otf_rambo7179

3 ай бұрын

Me to bro

What an incredibly well put together video thanks for being so thorough

thank you for the heart attack at 5:45 LOL totally sounds like a dog whining and my dog is dead asleep this scared the living crap out of me, had to replay it couple times to make sure I wasnt going coo coo. amazing video! going to try and fix my girlfriends sentra tomorrow, wish me luck :)

@TrickShiftGarage

Жыл бұрын

Lol! Sorry about that! Hope everything went well on the Sentra. Thanks for watching! 😁

Why did you replace the exhaust manifold after just 1.5 years if you had no exhaust leaks or check engine light?

@TrickShiftGarage

Жыл бұрын

Wanted to make a more in depth video from our first video. Thanks for watching! 👍

Why is the good cat being replaced?

@TrickShiftGarage

2 жыл бұрын

Just wanted to make a video that focused on replacing the catalytic converter. The old cat is fine and still works great, so at least I can keep as a backup. Thanks for watching!

The heat shields are missing. Not needed?

@TrickShiftGarage

6 ай бұрын

Not really, I've had mine off for 3 years without any issues. Thanks for watching! 👍

If I recall correctly, Nissan started advising people to just not install the the exhaust hanger because it tends to come loose and rattle, and you don't really need it. Some aftermarket manifolds don't even have the stud hole for it. My aftermarket cat also didn't come with the replacement nut and washers, but instead came with a couple of little split washers that didn't make any sense. I ended up going in circles with the Chinese company over and over again about that. They kept sending me a link to an installation video that didn't even show that part. I also ended up reusing the old washers etc from the original exhaust hanger.

@TrickShiftGarage

Жыл бұрын

That's true, I had all the hardware with my kit so I figured why not. If it didn't work out I would leave it off as you said it's not really necessary.

@MegaSunilnegi

Жыл бұрын

I have the hangar on my new manifold but it simply does not line up correctly with the bolts . I will be expanding the hole to see 8f that helps.

Thank you for your very professional work and useful video. 👍 👏

@TrickShiftGarage

Жыл бұрын

You're welcome Old Cat! Thank you for watching and leaving a comment! 👍

Can i fit headers on 2012 altima 2.5 without getting CEL?

@TrickShiftGarage

2 ай бұрын

Just a guess, but probably not unfortunately. There is a catalytic converter integrated with the OEM manifold with an O2 sensor before and after it. The ECU will pickup the same oxygen level and throw the CEL, at least that's how I think it would work lol. Thanks for watching! 🙂

I didn't take the alternator bracket off when I did mine. There was heartache and pain.

@TrickShiftGarage

Жыл бұрын

Hahaha! Yeah it's best to take off the alternator bracket, save your heartache and pain for something better 😂

One point I would emphasize is that if you try to use a regular socket wrench to loosen the belt tensioner, it won't fit in there (unless you have an extremely low-profile type of socket wrench that might fit). The socket sticks out too much and the wrench won't be able to fit between the nut and the metal of the auto body. You'll probably have to use a wrench that has a box-end (like the one you used in the video) or one with an open end, or even better, the official belt tensioner release tool from Nissan. There's also a generic belt tensioner release tool you can borrow from Advance Auto, but I've found it a bit difficult to work with, although it seems to work ok if you stick it in from the top under the hood instead of going in through the side opening.

@TrickShiftGarage

Жыл бұрын

Great tips AJ! I found out about the socket ratchet combo not fitting in the beginning. I was thinking about getting the generic serpentine belt tool kit but decided to make do with what I had. A wrench with a pipe that fits over the end should give enough torque to loosen the tensioner to get the belt off. On a side note, I think my tensioner pulley is starting to squeak so might have to replace that soon. This car keeps me busy 😂

@AJ-on-youtube

Жыл бұрын

@@TrickShiftGarage I replaced the belt tensioner pulley on mine. It was tricky working in the cramped space where the pulley is mounted, and I ended up breaking one of the bolts off in the engine block. Ended up having to get it drilled and tapped at the dealership. 1 out of 5. Do not recommend.

@TrickShiftGarage

Жыл бұрын

Wow! Dang that sucks! That's one of my great fears, snapping a bolt in the block. I almost did it with my oil cooler video a couple months ago (that shiny new bolt replaced the old bolt on the bottom lol). But I'll definitely keep this in mind when the time comes to replace it. 😉

Hello what is the size for the bottom manifold exhaust? I dont know whether i should get m10 1.50 x 52mm or m10 1.25 x 42mm?

@TrickShiftGarage

11 ай бұрын

I can't remember what pitch (1.5 vs 1.25) that ended up working for me, but I would buy both and then return the size you ended up not using. Hope this helps! Thanks for watching and good luck! 👍

My manifold studs wouldn't go in the right way either, but I was able to force them in with a device made for removing broken bolts. It took forever though.

@TrickShiftGarage

Жыл бұрын

Oh ok, mine were completely wrong and had to buy new exhaust studs 🤷‍♂️ Thanks for watching A J!

question: do i have to take te whole manifold off to replace just the gasket?

@TrickShiftGarage

10 ай бұрын

Unfortunately yes. The manifold mounts onto the studs that are in the head, so complete removal is necessary. Thanks for watching 👍

Super informative very well put together.

Quick question I’m getting one on my 2008 Nissan Altima!! I was driving and my car just lost power. Now my car is push start after cut off it’s like key will not recognize car any help????

@TrickShiftGarage

2 жыл бұрын

Hi Claudette, many possibilities! It could be the catalytic converter that has failed and collapsed inside. That would cause the car not to start. A mechanic will probably need to look at your car to accurately diagnose what's causing the problem. Hope this helps! Thanks for watching! 😊

Would a catalytic converter from an 09’ Nissan Altima be compatible with a ‘13 Nissan Altima?

@TrickShiftGarage

Жыл бұрын

Yes, all 2007 - 2013 Altimas use the same catalytic converter. Thanks for watching!👍

would you need to use the heat shields at all or theyre ok without them?

@TrickShiftGarage

Жыл бұрын

I think you'll be fine. I've had mine off for 3 years and haven't had any issues.

Hey, I installed a new catalytic converter, I watched your video and installed everything correctly, everything tighten correctly, and then when I went to turn on the car, smoke starts coming from around the CAT, is that normal or can it be a bad 02 sensor? Any ideas would help! Thanks!

@TrickShiftGarage

2 жыл бұрын

Hey Chubz! On the first few start ups it's normal, if your check engine light comes on then you might have a bad O2 sensor. But it should stop smoking. Thanks again for watching! 👍

Hey thanks foe the video. Do you have any issues with leaving the shields off.

@TrickShiftGarage

10 ай бұрын

You're welcome! Nope, haven't had any issues by keeping the heat shields off. Thanks for watching! 👍

Good video. Mine has had a code p0420 for a while now. It sounds like the upstream cat (the one you replaced). Heard its another common problem with this generation of altimas.

@TrickShiftGarage

2 жыл бұрын

Thanks! Yeah it's a very common problem with these Altimas. The original one that the car came with developed a small crack along the catalytic converter welds, which allowed exhaust fumes to come into the cabin. It could also be loud on a cold morning start up, quieting down once the heat expanded enough to semi-close the crack. Thanks for watching! 😎

@anacondadope550

2 жыл бұрын

@@TrickShiftGarage i replaced the part, and your video was invaluable to me, thx! However, one thing i found was that the studs connecting the down pipe and cat at the bottom of the car (the ones that get rusted) are actually 16 mm for most people who have the factory manifold on, the nuts your old hardwate kit had were 17's. I rounded one of them of using a 17 but it wasnt a big deal. Keep up the vids 👍

@TrickShiftGarage

2 жыл бұрын

Great, glad that it went well! Thanks for the heads up on the hex nut size! I'll be sure to add that to the description 🙂

What a excellent video

@TrickShiftGarage

Жыл бұрын

Thanks Miguel! 😁👍

You mentioned that you messed with the nuts a year ago. Did you replace the cat before ? Did it fail?

@TrickShiftGarage

7 ай бұрын

It was beginning to rust out and I wanted to replace the whole system anyway, thanks for watching 🙂

hi, i have nissan altima 2009 model. this car engine area nosise coming , it's mora than normal engine noise.and now too much petrol taking. it's like 1 ltr to 4.4 km like that. mechanic guy saiyed change the exhaust manifold,plesae i need advice.

@TrickShiftGarage

8 ай бұрын

Hi there, my guess would be a crack in the exhaust manifold. From 2007-2013 the exhaust manifold was a common failure. The welds on the catalytic converter would crack and lead to loud exhaust noises. I advise that you replace the exhaust manifold and see if that clears up your issue. Let us know if you have any questions! 👍

@salinda5422

8 ай бұрын

@@TrickShiftGarage thank you for your reply…🥰The mechanic guy removed sensor cable and said drive and check fuel efficiency. What happened after removing cable. Now without cable fuel working also good.

Thanks for the great video.

@TrickShiftGarage

Жыл бұрын

Thansk for watching and taking the time to leave a comment Manfred! We appreciate the support! 🤟

How do you adjust the torque to compensate for the anti-sieze?

@TrickShiftGarage

Жыл бұрын

You don't need to compensate for the anti-seize.

Yo trick I accidently broke the alternator bracket bolt inside. Over torqued I guess it something. Any tips? You think I can get by with the remaining 2 bolts for a little while until I figure it out? 2013 altima

@TrickShiftGarage

Жыл бұрын

Dang James, you're just too strong, haha! I think you can get by with two bolts. Just give the alternator a good shake once it's mounted to make sure it doesn't move around. Check it with the engine running too. If it looks too sketchy, then shut it down and get that bolt extracted and replace it with a new bolt. Hope this helps bro, good luck! 👍

@jameselizondo9583

Жыл бұрын

Haha! Well it looks alright for now. Hey do you know the foot pounds for those bracket bolts on a 2013 Altima? Google is giving me some crazy ranges. I did 40 last time (w/ 12 point socket prob didn't help) and ripped her right off. Anyways, update on my side. Learned how to replace the belt and alternator. Gearing up finally for the manifold

What was I t doing before you changed it my friend said it was cracked it was loud but started missing idk.

@TrickShiftGarage

Жыл бұрын

My original exhaust manifold had a crack along one of the welds. It stunk up the cabin and was pretty loud until it warmed up. I think the heat would "close" it off so the smell and sound would go away until the next cold start up. It never have a check engine light or had driveability issues, no misses. Hope this helps, thanks for watching! 👍

@sosa5719

5 ай бұрын

@@TrickShiftGaragedid you notice any power gain

I have a 2012 altama with an exhaust Leak and I really can't figure out where it is Any suggestions

@TrickShiftGarage

Жыл бұрын

You can check the O2 sensors and make sure they aren't leaking from there. Also the flex pipe that is down underneath the engine is notorious for rotting out and leaking exhaust there. If those are good, try to check the catalytic converter housing for small micro cracks! My 2007 Altima had this very issue, kept smelling very faint exhaust gases in the cabin and was loud on cold start-ups, once the engine warmed up the cat, the micro crack would kinda seal up and the smell would go away. The solution is to usually replace the manifold like we did here in this video. Now, the issue is the heat shield is blocking any chance of inspecting it and once you get the shield off the crack might not be visible, unless the it's on top in plain view. You probably won't find it until after you pull the manifold off and inspect it closer. Hope this helps! If you have any other questions let us know! 👍

@TrickShiftGarage

Жыл бұрын

Here's an older video of when I repaired that old cracked manifold: kzread.info/dash/bejne/kYpqsreclJbdqLw.html This might help give more insight to the issue. Thanks for watching!

The video was very helpful, but now that I replaced the manifold calytic converter the car shakes and even shuts down, what could it be?

@TrickShiftGarage

Жыл бұрын

Hi Hector, do you have a check engine light on? Sounds like something might not have been plugged back in... check over the electrical connections on the alternator and the O2 sensor. Also, check your ground cables that were detached on the engine mount or the alternator bracket (can't remember exactly) Also, make sure your serpentine belt is in good condition and not slipping.

@hectorreyes7790

Жыл бұрын

@@TrickShiftGarage thanks for your reply. I don't have a eng light on . And the belt was put back on the way it was and everythingwas working fine . with the exception that the catalytic converter had 2 small wholes on it and it whistle and had loss some power no that I replaced it thanks to your video it's nice and quiet only when I step on the gas pedal now it chokes and if I persist it shuts down.

@TrickShiftGarage

Жыл бұрын

Hmm, that sounds like a possible fueling issue. Does it stall out every time or just when you step on it hard?

I need to know the size of the screw that connects the bracket at the bottom of the manifold to the engine block

Awesome video. Super thorough and great shots. Was there a reason for changing the manifold?

@TrickShiftGarage

2 жыл бұрын

Thanks Dan! Just wanted to make a better exhaust video that focused only on replacing the manifold. The other video we have is on the whole exhaust system lol. The old manifold was fine and still works great, so at least I can keep as a backup haha! Thanks for watching! 😎👍

@bearorion

7 ай бұрын

So where's the actual catalytic converter? Mines bad I got multiple videos saying theres another cat further down the pipes which do I replace?

@bearorion

7 ай бұрын

It's a 2008 sl 2.5

Great video. Which aftermarket company did you use?

@TrickShiftGarage

5 ай бұрын

I used a brand called MOSTPLUS, it's been good so far, no issues. Here's a link to it if you're interested: amzn.to/3ia0W3x Thanks for watching! 👍

Hello. Thanks for your videos. I have the same car. Everytime I look something for my car your videos show up. I have the check engine light on. The mechanic checked the error code and told me that the code is about the upper catalytic converter or the oxygen sensor on it. However the car has no problem when running. I guess when you have a faulthy sensor you should have other problems or symptoms. The car has 103.000 miles. Do you think the problem is the catalytic converter or the oxygen sensor? Thx

@TrickShiftGarage

Жыл бұрын

Hi MC! Thanks so much for watching our videos! This is a tough call... If the car is running without any noticeable hiccups besides the check engine light, I'd suspect the O2 sensor first. Also, the catalytic converters are notorious for going bad on these cars as well. However, the O2 sensor is MUCH cheaper and easier to replace compared to the catalytic converter so I'd go that route first and see if it clears your code. If it doesn't go away then it's the catalytic converter. Hope this helps MC thanks for watching again! 😁👍

@MC-ph7gr

Жыл бұрын

@@TrickShiftGarage Is it possible that the car runs problem/symptom free with a bad upstream oxygen sensor? Thx

@JonathanRodriguez-rq3hi

10 ай бұрын

You don't have to put the shield back ???

Hello I am trying to Fix code p2423 on. 2012 Altima , will this resolve the code ? Thanks for your time

Why remove the alternator? I went to a shop & they just pulled it out straight.

@TrickShiftGarage

10 ай бұрын

I had to remove it because I didn't have anything to reach the nut behind the alternator unfortunately. If you have the right tools to reach out feel free to skip that step 😊

@xCARPx2014

9 ай бұрын

@@TrickShiftGarage ohh ok that makes sense, thanks. Another question, at 0:48, do you not keep the manifold shield? It rattles a lot on mine, I'm thinking of removing it, would it affect anything?

You not have to put the shield back???

@TrickShiftGarage

10 ай бұрын

You can if you want to, mine has been off for years with no issues. Thanks for watching! 👍

Good video

@TrickShiftGarage

4 ай бұрын

Thanks for watching and taking the time to leave a comment! 🤟

Does your check engine light stay out with the aftermarket cat ?

@TrickShiftGarage

Жыл бұрын

Yes, haven't had any issues with it, still going strong. Thanks for watching! 👍

@jonathantorres8379

Жыл бұрын

@@TrickShiftGarage thank you

@TrickShiftGarage

Жыл бұрын

You're welcome

My 07 altima has developed a bad habit of smoking I can't find a leak but there smoke coming from either the cat or from behind the manifold there is oil on the heat shield and if you hit the brakes hard it will start billowing out like you're getting rid or mosquitoes it'll fill up the Inside it wil roll out the back and out the passenger side wheel side its not brake smoke and there is smoke constantly coming from the front of engine at the manifold I know it needs a vLve cover gasket but that wouldn't mKe it smoke at the cat the car has plenty of power ND runs good just started smoking BAD

@TrickShiftGarage

Жыл бұрын

Hi Jamie! Wow! Sounds like you won't have to worry about mosquitoes this summer! 🤣 My guess/theory is that oil might be leaking pretty badly out of your valve cover gasket (or spark plug tube seals). So when you hit the brakes hard, the g-forces push the oil forward towards the front of the car and through the leaking valve cover gasket and on top of your manifold/cat. where then the oil burns off causing a lot of smoke under hard braking. I could be wrong though. No check engine light and a smooth running engine means something external is probably going on. Also, if your losing oil make sure to check the oil level and fill it periodically. Don't want to get too low on oil! Hope this helps, thanks for watching! 🙂

Wait the label says 2007 to a 2013 but you verbally say a 2007 to 2012 so which is it bcus I have a 2013 and need to know please asap

@TrickShiftGarage

2 жыл бұрын

Yup! Found out after making the video it fits 2013 models with the 2.5 liter engine. Thanks for watching! 👍

So theres no cat inside the exhaust manifold? Why does the video have the label then??

@TrickShiftGarage

7 ай бұрын

So the cat is that cylindrical looking piece after the exhaust runners converge , so it's an integrated exhaust manifold with a catalytic converter basically 😊

@TrickShiftGarage

7 ай бұрын

So the cat is that cylindrical looking piece after the exhaust runners converge , so it's an integrated exhaust manifold with a catalytic converter basically 😊

@bearorion

7 ай бұрын

@@TrickShiftGarage thank you. Now I count 20 bolts on the trans pan ... Would it be a 21 bolt gasket setup?

Great job thanks bud

@TrickShiftGarage

2 жыл бұрын

Thanks for watching 5MILE! 🙂

How long did it take for you to complete?

@TrickShiftGarage

Жыл бұрын

It took me 2 days to complete it, but I could do it in a day if I didn't have to shoot video 😅 Thanks for watching!

Hey trick noticed the honey comb in the cat was good for you, why were you replacing the exhaust manifold? Did you have a P0420?

@alimuhammad4227

10 ай бұрын

I just got an Altima Coupe 2008 and it threw a P0420 the last owner said he got a crack in the manifold and replaced it like a year back. Not sure if that’s my issue but the car does sound loud to begin with when accelerating. Any thoughts?

I bought one of those weirdly small $100 Chinese cats and it lasted a few months before it started throwing P0420.

@TrickShiftGarage

Жыл бұрын

That's what this one is too. It's been surprisingly working good so far 😂

Great video. I want to replace mine on my coupe. Quick question. Was this cali emissions? And how is the new one you put in working?

@TrickShiftGarage

2 жыл бұрын

This one is not Cali emissions compliant. Sorry! The new one is working great, no engine lights, no exhaust leaks/smells, it's been quiet. Basically, so far so good! Thanks for watching!👍

@S_King117

2 жыл бұрын

@@TrickShiftGarage ok. And would you happen to know if these cars are cali emissions? Or are they federal?

@TrickShiftGarage

2 жыл бұрын

Assuming you mean CARB compliant, this manifold is not. The states that are under CARB are the following (including California): Colorado Connecticut Delaware Maine Maryland Massachusetts New Jersey New York Oregon Pennsylvania Rhode Island Vermont Virginia Washington Washington D.C. Hope this helps!

@S_King117

2 жыл бұрын

@@TrickShiftGarage this actually does give me great insight. Thank you so much. Im from Mass so that mean ill have to get one thats compliant with California emissions. That clears the dust for me

@TrickShiftGarage

2 жыл бұрын

You're welcome King!

Is this the same process for 07 maxima?

@TrickShiftGarage

Жыл бұрын

Hi James, this process does not apply. The Maxima has a 3.5 Liter V6 engine while this video is for the 2.5 Liter Altima. Thanks for watching! 👍

@himeedajew

Жыл бұрын

@@TrickShiftGarage ok thank you!

@TrickShiftGarage

Жыл бұрын

You're welcome 😊

Hey man, thanks for detailed tutorials you always provide. Just wanted some quick insight on a possible catalytic converter issue. I have an 09' Altima and recently tried to install some spark plugs and messed up. I might've over-torqued one of them and upon taking it out, some of the porcelain shattered and fell into the cylinder head onto the piston. I used a borescope and vacuumed as much as I could out but there were still a few tiny shards left in there. From my research, the pieces would blow through the exhaust valve and possibly clog up the catalytic converter. Did the job a couple of weeks ago and just got an OBD2 test and got the dreading P0420 code, along with P0113. Do you think those porcelain pieces caused the code for the converter? I heard you can use a cleaner for it but I'm not sure how it would work in flushing out the porcelain. Thanks

@TrickShiftGarage

11 ай бұрын

You're welcome man! Oh wow, this sounds like a nightmare, sorry to hear that this happened to you. Going by what you have stated, It's highly likely that's what happened with your catalytic converter. I'm not familiar with any type of cleaner that could flush out pieces of porcelain so couldn't say if it would work or not. The safest route would be removing the catalytic converter and see if you can blow the pieces out with some compressed air... Or you can just replace the whole unit and not have to risk pulling it off again, definitely a tough spot to be in.

Hey man where did you get the new hardware ?

@TrickShiftGarage

7 ай бұрын

I got mine at Lowe's nearby, they have a good selection of hardware 😉

@leftismith1518

7 ай бұрын

@@TrickShiftGarage thanks because I found the same one on eBay and I saw it came with the same exact hardware yours did so I’m assuming that I’m going to have the same issue fitting the studs in

@TrickShiftGarage

7 ай бұрын

Right, unless they fixed the issue over the past year. I also replaced the OEM manifold 3-4 years ago before this video and the hardware was correct and worked fine. Hopefully yours is good too.

@leftismith1518

7 ай бұрын

@@TrickShiftGarage so I got a p0420 code for bank 1 below threshold should I use car cleaner first and see if it fixes it or just replace the exhaust manifold and gasket

@TrickShiftGarage

7 ай бұрын

Honestly, I'd just replace it. These manifolds have been known to go bad. The annoying part is having to move the alternator out of the way to get the bolt behind it but it's really not that bad. If you have any questions just let us know!

Some people say you should "break in" a new catalytic converter by idling it for a few minutes and then holding the accelerator down so the engine runs at like 2500 RPMs for about 2 minutes. Something about the substrate expanding or something. You don't think it's necessary?

@TrickShiftGarage

Жыл бұрын

I let mine idle for about 20 minutes before shutting it off. I did even know about this "break in" procedure to be honest. Good to know for future videos. I'd say try it and see how it works out. I haven't had any issues with mine since installing the new catalytic converter. Thanks for the info AJ! 😉👍

My engine bolts at 14:30 are 14 mm, not 17..

@TrickShiftGarage

Жыл бұрын

Yeah, that's my bad lol. Mine were 17 mm nuts from the aftermarket manifold I installed previously. The stock nuts are 14 mm. Thanks for pointing this out 😁 👍

How much this catalytic

@TrickShiftGarage

Жыл бұрын

It is about $138: amzn.to/3ia0W3x

Where’s the heat shield?

@TrickShiftGarage

Жыл бұрын

Decided to leave it off a long time ago. I think there's 5 or 6 bolts (10 mm) that attach it to the manifold.

Hey really appreciate the video. My check engine light is on PS0420 and I can't afford to take it to the dealer. Gonna give this a try. Quick question. How confident are you driving without both heat shields?

@TrickShiftGarage

Жыл бұрын

Hi James. After 2 years of driving with no heat shields I can say it's been fine, there hasn't been any issues. Putting them back on is just a matter of screwing the bolts in. The reason why I decided to ditch them is because the holes where the bolts go in were rusting out badly. Hope this gives you peace of mind. Thanks for watching! 👍

@jameselizondo9583

Жыл бұрын

I the quote today from the dealership. 1874 plus tax. Can't do it so I'm gonna give it a try. Also they want me to replace both front lower control arms. 1500 bucks. Do you have videos for those lol

@TrickShiftGarage

Жыл бұрын

Wooooo! That's crazy high lol. If you have any questions don't hesitate to reach out. I haven't done the lower control arms yet, but eventually they'll need to get replaced 😭🤣

@jameselizondo9583

Жыл бұрын

@@TrickShiftGarage ya things may get pricey real quick haha. Hey is it just me or upstream 02 sensors expensive on 2013 altimas? I thinking about replacing it since I'm all this work but those things cost around 200 bucks :/

@TrickShiftGarage

Жыл бұрын

Yeah they're pricey right now. I try to stick to OEM parts when I can but if not I stick to well known brands like Bosch or Duralast. You can get cheaper no-name brand ones, but you might be replacing it sooner than expected. That's just my 2 cents anyways lol.

so if it was good , why replacing it?

@TrickShiftGarage

Жыл бұрын

I wanted to make a better video on replacing the exhaust manifold basically lol. I did one when we first started out and it wasn't very informative so made a new one with this video. Thanks for watching! 😊

@sidowsidow

Жыл бұрын

@@TrickShiftGarage Thank your vides are the best out there

NEVER EVER EVER USE WD-40!!! Use LPS1 for that!

@TrickShiftGarage

9 ай бұрын

I've never heard of LPS1 but I'll try it out next time. Thanks for the tip! 😊

My car be making hissing noise, my mechanic trying to charge me $350 to put my converter on

@TrickShiftGarage

Жыл бұрын

Hi Don, a hissing noise could definitely be an exhaust leak! Now you can save $350 and do it yourself. Let us know if you have any questions 🙂