2006 Ford Focus Tie Rod repair

Quick video on the installation of a outer tie-rod end on 2006 Ford Focus Wagon. This job should be similar on Focus cars from 2005-2007 I believe.

Пікірлер: 24

  • @daniellaudman8580
    @daniellaudman85803 жыл бұрын

    When it comes to suspension parts especially if your roads are bad in your area it's best to go with the Moog top shelf well worth it in the long run

  • @nickleginza1402
    @nickleginza14025 жыл бұрын

    This is a quality video thank you

  • @woodsarmoury

    @woodsarmoury

    5 жыл бұрын

    Thanks, hope it helps with your Focus. Maybe I should do more videos like this?

  • @jonathantorres5710
    @jonathantorres57104 жыл бұрын

    Thank you very much, I have 2005 ford focus has the same problem on both wheels

  • @woodsarmoury

    @woodsarmoury

    4 жыл бұрын

    Glad it helped

  • @daniellaudman8580
    @daniellaudman85803 жыл бұрын

    Count the turns it takes to remove it

  • @xman6632
    @xman66322 жыл бұрын

    Thank you!

  • @paquesepas6696
    @paquesepas66964 жыл бұрын

    I have a 2005 ford focus and when I'm driving itll randomly pull to the left and I have to straighten out the car so I'm pretty scared of taking it to highway. What do you think could be my problem? It happens when I'm accelerating and the it'll jerk to the left.

  • @woodsarmoury

    @woodsarmoury

    4 жыл бұрын

    Usually with a tie rod problem the car will always pull to one side (sometimes when braking) there will also be some vibration in steering wheel. Hard to say, without looking at it. Id say take it to a shop and have them do a front end inspection.

  • @paquesepas6696

    @paquesepas6696

    4 жыл бұрын

    @@woodsarmoury it ended up being bad front tires, replaced them and got an alignment.

  • @paulscontainersltd.4020
    @paulscontainersltd.40205 жыл бұрын

    Will both of the 2 outer tie rods made for the 2006 focus that year fit the car ?

  • @woodsarmoury

    @woodsarmoury

    5 жыл бұрын

    I believe both will work... BUT the size is slightly different and it could effect the alignment. Just make sure you have month of manufacture and maybe the VIN when you go to parts store.

  • @paulscontainersltd.4020

    @paulscontainersltd.4020

    5 жыл бұрын

    Thanks for the info I look forward to seeing more of your videos

  • @gnatgnutz7139

    @gnatgnutz7139

    Жыл бұрын

    If you have the straight tie rod ends on your car you have to put those back on unless you're changing the inner tie rods also. They have a different thread pitch. You can use either set but you have to use the inners and outers that go together. Ford changed to the straight ones Midway through the 2006 production year.

  • @AyooAdrian
    @AyooAdrian3 жыл бұрын

    Is it the same for an 07 focus?

  • @woodsarmoury

    @woodsarmoury

    3 жыл бұрын

    Yeah the procedure would be the same.

  • @davidkirkland4364
    @davidkirkland43643 жыл бұрын

    Be sure you torque that nut on top of the tie rod end next time.

  • @littleaub2145
    @littleaub2145 Жыл бұрын

    Just count your full turns you make with the tie rod as you take it off, then do the same turns with the new tie rod.

  • @paulscontainersltd.4020
    @paulscontainersltd.40205 жыл бұрын

    I just subscribed Can you do a brake pad replacement video on the 2006 focus ?

  • @woodsarmoury

    @woodsarmoury

    5 жыл бұрын

    My first request! I have done them a few times, pretty easy. I will make a video next time mine need replacement.

  • @daniellaudman8580
    @daniellaudman85803 жыл бұрын

    Counted 13

  • @nataliemanzo34
    @nataliemanzo346 жыл бұрын

    What about the inner tie rod

  • @paulscontainersltd.4020

    @paulscontainersltd.4020

    5 жыл бұрын

    Anonymous It was ok