After some research, I couldn't find any videos online showing the removal of an engine on an Arctic Cat Prowler XT 650 H1. So, I figured I'd make one.
This is the second time in a couple weeks I had to remove the engine. The first time I didn't video. Second time I did. This shows the process I found the easiest to pull the engine on my own.
The previous removal was to diagnose and fix a bad grinding sound I was experiencing. I had a bad output shaft bearing. I replaced and couldn't find any additional issues. Apparently I didn't look hard enough. In about 20 minutes of drive time after re-installation, grinding sound is back. Time to dig in and fix it correctly.
Join my on the experience trying to find out what is wrong with my Prowler....again.
If you find this video useful and interesting. Please like and subscribe. This will allow me to keep making content for you guys.
I appreciate your support.
See below for links to some of the tools and items used during this video. Please note, I may earn a commission using the below links to purchase.
Gearwrench Ratcheting Wrenches - amzn.to/3PjRusy
Straps 6 Foot - amzn.to/3PeVhaL