This is our video on how to solve your issues related to a faulty steering position sensor! Hope this helps and if it does please feel free to like & subscribe!
Жүктеу.....
Пікірлер: 18
@jewllake3 жыл бұрын
Thanks! This will transfer over to my 06 Yukon Denali as it also has all these modules.
@DjNYTEE3 жыл бұрын
Great job and thankyou for all the detail
@andresalanis76022 жыл бұрын
I have some issue on my escalade 2002 , was wondering if the sensor on my escalade 2002 is under the driver side or passenger?? Thanks for sharing your videos very helpful..
@CarterEdison7772 жыл бұрын
If the pin falls out dont worry. You can take it apart and realign it to center and put the pin back in
@edneighbor494 Жыл бұрын
Did you notice a difference in the steering after replacement or was it a matter of all the idiots lights went away? I have an 03 Avalanche that’s just all over the road and all the front end work and alignment has been completed. Driving me nuts.
@mijohnst4 жыл бұрын
Thanks for posting this. Very helpful! I screwed up my own sensor by completely removing my column and not bracing the steering wheel. Anyway, question for you... What if you'd only disconnected the steering shaft from under the hood so you could have more room under the steering column to separate it? Do you think that would save from haven't to unbolt the column or is the column unbolting necessary? Just a thought...
@CarterEdison777
2 жыл бұрын
Yup thats what i did!
@Dan-gj1hz
Жыл бұрын
Same
@nicholeweatherspoon3942 Жыл бұрын
Did you have to recalibrate the sensor?
@SlickRick2143 жыл бұрын
So why did ya take off the gauge bezel, looks like you can get away with it by just removing the bottom panel
@Yophillips32722 жыл бұрын
The gps tracker is what car lots put in to find the car to repo it and some of them keep the car from starting when you late on your bill. I've been there.
@edwinj82753 жыл бұрын
So what’s the name of that box underneath the seat I have a service stability sensor light on my 03 Escalade and abs light and it only comes on when I go over a bump big enough or when I’m turning. All of my wheel bearings are fine and I don’t get a code for it
@z71overland05
6 ай бұрын
Were you able to find a solution?
@edwinj8275
6 ай бұрын
@@z71overland05I did not, it rarely did it. I sold it since.
@CarterEdison7772 жыл бұрын
You are always tracked via onstar! (Unless you disconnect it)
@JohnYukishiroObata2 жыл бұрын
will the stability service light go out on its own? or will I have to take it to the alignment shop to get it reset?
@mayken6661
2 жыл бұрын
Should go off on own after driving a bit. Did it fix the light?
@JohnYukishiroObata
2 жыл бұрын
@@mayken6661 yes it did. Thanks for getting back to me.
Пікірлер: 18
Thanks! This will transfer over to my 06 Yukon Denali as it also has all these modules.
Great job and thankyou for all the detail
I have some issue on my escalade 2002 , was wondering if the sensor on my escalade 2002 is under the driver side or passenger?? Thanks for sharing your videos very helpful..
If the pin falls out dont worry. You can take it apart and realign it to center and put the pin back in
Did you notice a difference in the steering after replacement or was it a matter of all the idiots lights went away? I have an 03 Avalanche that’s just all over the road and all the front end work and alignment has been completed. Driving me nuts.
Thanks for posting this. Very helpful! I screwed up my own sensor by completely removing my column and not bracing the steering wheel. Anyway, question for you... What if you'd only disconnected the steering shaft from under the hood so you could have more room under the steering column to separate it? Do you think that would save from haven't to unbolt the column or is the column unbolting necessary? Just a thought...
@CarterEdison777
2 жыл бұрын
Yup thats what i did!
@Dan-gj1hz
Жыл бұрын
Same
Did you have to recalibrate the sensor?
So why did ya take off the gauge bezel, looks like you can get away with it by just removing the bottom panel
The gps tracker is what car lots put in to find the car to repo it and some of them keep the car from starting when you late on your bill. I've been there.
So what’s the name of that box underneath the seat I have a service stability sensor light on my 03 Escalade and abs light and it only comes on when I go over a bump big enough or when I’m turning. All of my wheel bearings are fine and I don’t get a code for it
@z71overland05
6 ай бұрын
Were you able to find a solution?
@edwinj8275
6 ай бұрын
@@z71overland05I did not, it rarely did it. I sold it since.
You are always tracked via onstar! (Unless you disconnect it)
will the stability service light go out on its own? or will I have to take it to the alignment shop to get it reset?
@mayken6661
2 жыл бұрын
Should go off on own after driving a bit. Did it fix the light?
@JohnYukishiroObata
2 жыл бұрын
@@mayken6661 yes it did. Thanks for getting back to me.