Thank you. 🙏🏻 it’s crazy how for such a common car you can’t find information on how to do step by step repairs. You’re a life saver thank you!
@kimhoeunchhay4295
2 жыл бұрын
Glad to help
@johnnygroc12 ай бұрын
That is one of the best walkthroughs I ever watched thank you for making it so simple I know it's not simple when you go to do it but you make it look
@havalos415 ай бұрын
Great video, very good quality and explain..❤
@waynejordan74737 ай бұрын
I think I might have to do this to mine . Just got it for a thousand dollars and it drives fine but I’m noticing odd things with the wheel and it’s making me think it’s the power steering pump because the wheels and axels are fine
@supernintendo75793 ай бұрын
THANK YOU SO MUCH FOR SHOWING US THIS VIDEO
@kristophermcguire2897 Жыл бұрын
Great video! I'd never changed one before, did it this morning. Our Pilot sounds and steers so much better. Keeping in mind that I'd never done this before, it took about 15 min to pull the old one out, and about 20 min to install the new one. I won't talk about the hour in between it took me to get that bloody nut off the pulley. I do highly recommend having an impact wrench handy when you do this for that (or at least a vise, seriously!).
@grossfam4christ18 ай бұрын
Thank you the video was very helpful.
@kimhoeunchhay4295
7 ай бұрын
You're welcome!
@ericghdez99044 ай бұрын
Thanks a lot for the video... Really help me....👍👍👍👍
@markread73332 жыл бұрын
I noticed you didn’t drain or bleed the ps fluid before/after. And you didn’t mention replacing the o-ring on the High-pressure line. Did you do it but didn’t show/ mention it?
@fourdezzzz2 жыл бұрын
Thank you ! You were excellent in your instructions!
@kimhoeunchhay4295
2 жыл бұрын
Thanks for watching!
@jamatildawong2 жыл бұрын
Thank you. Nice and straight forward.
@warspirit9488 Жыл бұрын
How did you reach the lower nut so easy I don't have any clearance on mine
@shaggyballs-nh7ei2 жыл бұрын
Great video thank you.
@BlasterTheMaster2 жыл бұрын
This is awesome! Thank you so much! I have to replace my knock sensor and wiring harness and I’m trying to avoid taking off the intake manifold. Do you think I could get access to it by just removing the power steering?
@markhandy77483 жыл бұрын
excellent vidio.great job very very helpful. thank you char
@kimhoeunchhay4295
3 жыл бұрын
Glad it was helpful!
@romansabagala3948 Жыл бұрын
Good job thank you!
@warrencottrellmusic2 жыл бұрын
Very informative video. Thanks
@kimhoeunchhay4295
2 жыл бұрын
Glad it was helpful!
@bASICMiner Жыл бұрын
Thank you for this video! Tremendous help. :)
@kimhoeunchhay4295
Жыл бұрын
Thank you for watching
@J-Bizzle2152 жыл бұрын
Thank You!
@gfunk4622 жыл бұрын
Thank you homie!
@kimhoeunchhay4295
2 жыл бұрын
Any time!
@landryland38 ай бұрын
Thanks. I'm doing it in a couple days.
@kimhoeunchhay4295
7 ай бұрын
You can do it!
@carnivoredad7285 Жыл бұрын
I think you forgot to mention that you need to bleed the system of air or the pump will explode from the pressure in the unit.
@Sitnubs11 ай бұрын
Very good video sir.
@marvinramirez151411 ай бұрын
Good jod did u help me a lot bro
@TerranceLBryant2 ай бұрын
Great video thank you
@kimhoeunchhay4295
2 ай бұрын
Glad it was helpful!
@XavierVillegaz2 жыл бұрын
Very nice, thank you. I think it would be great a test result at the end of the video, but I trust that P.S. Pump is working as said in the specs.
@freddyblanco8990 Жыл бұрын
Hey buddy. Just got done replacing power steering pump in 2004 honda pilot put everything back got it running but lts making a squealing noise what do l do for that noise to go away ?
@kimhoeunchhay4295
Жыл бұрын
HI sir How are you ? You did replace power steering pump right. What kind of power power steering fluid did u use after replace pump (Honda power steering fluid recommend)? Pls inspect crack hose from reservoir to pump or your car power steering pump belt could be dry or old those problem might lead your car got squealing noise. Pls let me know more if it wont work. Thank you
@BabyBang17datruth
Жыл бұрын
@@kimhoeunchhay4295 Mines making a squealing noise too after I replaced the reservoir, pump and fluid.
@pepperjack-ue7dc2 жыл бұрын
what is the website where you bought your part? thank you .
@kimhoeunchhay4295
2 жыл бұрын
I ordered pump from Autopart store I did not use website sorry
@StayHandyLA2 жыл бұрын
Hi, I replaced just like the video and still have a whine from my Pilot. It is not as bad as it was before but is still making noise. Any suggestions for what I could do?
@MrKim-hh9fb
2 жыл бұрын
Try replacing the o ring in new powersteering pump where highpressure hose connects to.
@StayHandyLA
2 жыл бұрын
@@MrKim-hh9fb i did that. Do you think it could be the power steering reservoir being blocked? I know there is a mesh film at the bottom that catches debri.
@ayearetee3342
2 жыл бұрын
That's what I did reservoir and o rings went away
@chesterjones95652 жыл бұрын
Nice video, would be helpful if you listed the bolt sizes too.
@kimhoeunchhay4295
2 жыл бұрын
Hi, Chester How are you ? Power steering high pressure hose bolts 10 mm socket Power steering power bolts 12 mm socket power steering adjuster bolts and nut 12 mm socket Power steering pump pulley nut 17 mm Thank you so much for watching my video. Thank you kim
@timbrady6473 Жыл бұрын
Fifteen minutes, anybody have the time listed for this job from the dealership?
@redstreet77042 жыл бұрын
I wish I had a dollar for each time I've removed the top plastic engine cover.
@ayearetee3342
2 жыл бұрын
Lol you still remove it ? 🤣 I took mines off years ago for that reason
@Luis-xv7tl Жыл бұрын
@BrakePlus is charging me $300 in labor stating it takes about 1:30 -2:00 hours. Will show them your 14 min video. Maybe they need a lesson.
Пікірлер: 51
Thank you. 🙏🏻 it’s crazy how for such a common car you can’t find information on how to do step by step repairs. You’re a life saver thank you!
@kimhoeunchhay4295
2 жыл бұрын
Glad to help
That is one of the best walkthroughs I ever watched thank you for making it so simple I know it's not simple when you go to do it but you make it look
Great video, very good quality and explain..❤
I think I might have to do this to mine . Just got it for a thousand dollars and it drives fine but I’m noticing odd things with the wheel and it’s making me think it’s the power steering pump because the wheels and axels are fine
THANK YOU SO MUCH FOR SHOWING US THIS VIDEO
Great video! I'd never changed one before, did it this morning. Our Pilot sounds and steers so much better. Keeping in mind that I'd never done this before, it took about 15 min to pull the old one out, and about 20 min to install the new one. I won't talk about the hour in between it took me to get that bloody nut off the pulley. I do highly recommend having an impact wrench handy when you do this for that (or at least a vise, seriously!).
Thank you the video was very helpful.
@kimhoeunchhay4295
7 ай бұрын
You're welcome!
Thanks a lot for the video... Really help me....👍👍👍👍
I noticed you didn’t drain or bleed the ps fluid before/after. And you didn’t mention replacing the o-ring on the High-pressure line. Did you do it but didn’t show/ mention it?
Thank you ! You were excellent in your instructions!
@kimhoeunchhay4295
2 жыл бұрын
Thanks for watching!
Thank you. Nice and straight forward.
How did you reach the lower nut so easy I don't have any clearance on mine
Great video thank you.
This is awesome! Thank you so much! I have to replace my knock sensor and wiring harness and I’m trying to avoid taking off the intake manifold. Do you think I could get access to it by just removing the power steering?
excellent vidio.great job very very helpful. thank you char
@kimhoeunchhay4295
3 жыл бұрын
Glad it was helpful!
Good job thank you!
Very informative video. Thanks
@kimhoeunchhay4295
2 жыл бұрын
Glad it was helpful!
Thank you for this video! Tremendous help. :)
@kimhoeunchhay4295
Жыл бұрын
Thank you for watching
Thank You!
Thank you homie!
@kimhoeunchhay4295
2 жыл бұрын
Any time!
Thanks. I'm doing it in a couple days.
@kimhoeunchhay4295
7 ай бұрын
You can do it!
I think you forgot to mention that you need to bleed the system of air or the pump will explode from the pressure in the unit.
Very good video sir.
Good jod did u help me a lot bro
Great video thank you
@kimhoeunchhay4295
2 ай бұрын
Glad it was helpful!
Very nice, thank you. I think it would be great a test result at the end of the video, but I trust that P.S. Pump is working as said in the specs.
Hey buddy. Just got done replacing power steering pump in 2004 honda pilot put everything back got it running but lts making a squealing noise what do l do for that noise to go away ?
@kimhoeunchhay4295
Жыл бұрын
HI sir How are you ? You did replace power steering pump right. What kind of power power steering fluid did u use after replace pump (Honda power steering fluid recommend)? Pls inspect crack hose from reservoir to pump or your car power steering pump belt could be dry or old those problem might lead your car got squealing noise. Pls let me know more if it wont work. Thank you
@BabyBang17datruth
Жыл бұрын
@@kimhoeunchhay4295 Mines making a squealing noise too after I replaced the reservoir, pump and fluid.
what is the website where you bought your part? thank you .
@kimhoeunchhay4295
2 жыл бұрын
I ordered pump from Autopart store I did not use website sorry
Hi, I replaced just like the video and still have a whine from my Pilot. It is not as bad as it was before but is still making noise. Any suggestions for what I could do?
@MrKim-hh9fb
2 жыл бұрын
Try replacing the o ring in new powersteering pump where highpressure hose connects to.
@StayHandyLA
2 жыл бұрын
@@MrKim-hh9fb i did that. Do you think it could be the power steering reservoir being blocked? I know there is a mesh film at the bottom that catches debri.
@ayearetee3342
2 жыл бұрын
That's what I did reservoir and o rings went away
Nice video, would be helpful if you listed the bolt sizes too.
@kimhoeunchhay4295
2 жыл бұрын
Hi, Chester How are you ? Power steering high pressure hose bolts 10 mm socket Power steering power bolts 12 mm socket power steering adjuster bolts and nut 12 mm socket Power steering pump pulley nut 17 mm Thank you so much for watching my video. Thank you kim
Fifteen minutes, anybody have the time listed for this job from the dealership?
I wish I had a dollar for each time I've removed the top plastic engine cover.
@ayearetee3342
2 жыл бұрын
Lol you still remove it ? 🤣 I took mines off years ago for that reason
@BrakePlus is charging me $300 in labor stating it takes about 1:30 -2:00 hours. Will show them your 14 min video. Maybe they need a lesson.
@warspirit9488
Жыл бұрын
He makes it look easy but it's hard for me