Leave a like for the restyled 125!

@ZXTimothyzx

7 жыл бұрын

ReturnOfDeeO bike needs some graphics

@RewerWn

7 жыл бұрын

ReturnOfDeeO I was going to get a YZ 125 but one of my dads friends was selling a kx250f so me and my dad went there today and i will hopefully be able to pick it up soon! The kit looks great!

@RewerWn

7 жыл бұрын

Well for the amount of the video I've seen

@jacobhawks3535

7 жыл бұрын

ReturnOfDeeO I think it's cooler without graphics lol just an opinion whatever you do with it is cool

@stormsinger3432

7 жыл бұрын

Your supposed to put the zip tie through the fender hole and up into the number plate, and go into the other hole and down through the fender hole. If that makes sense.

Was literally going to tell you to get a set! On top of the game bro✊🏼

YES YOU FINALLY DID IT!!! So stoked for you! can't wait for the dope vids!!

I like it! Good video and really enjoyed the beat in the background

love it can't wait till it's all the way finished

Wow what a difference! Bike looks 50x better

ReturnOfDeeo the ziptie is for the peice on top of your front number plate (the bit that curls around the bar) there should be a little hole that it goes through just ziptie it together.

Nothin makes you wanna ride the old 2 stroke more than hookin it up with a full replacement of the hand controls and some updated plastics. The no graphics look is actually fire right now. You got potential for a sick graphics design with the red accents you already have on the seat cover.

The 125 is looking so fresh deeo!

Literally best speed for this type of time lapse 👌

@ReturnOfDeeO

6 жыл бұрын

Glad you enjoyed YZ!

Awesome DeeO!

@991 for that stuck / stripped Phillips shroud bolt: very carefully use a Dermal tool to make a slot for a screw driver you have. (I'd touch up the driver edge so it's not rounded at all). Then spray the back side as best you can with penetrating oil. Leave for two days and spray again, leave for a day then come back and take that bolt off. Hope you can get the shroud off.

Same with my yz250 had to kinda bend the front number plate to fit and run bolts through it but It worked

That YZ looks so much better now Deeo! ;)

My radiator shroud for some reason won't align with the radiator so I can't put in the bottom screw. Any advice?

Deeo I have a steel frame yz what paint were you talking about on the frame

Love the bike man. I got the same kit on my bike

that's awesome i didn't even know they made a restyle kit! i always just did what you did with just the front fender

@madmaxracing5788

7 жыл бұрын

Jesse Strader really?

@JesseJessMyster

7 жыл бұрын

I would have been all over that if i knew. now i want to buy another yz250 just to do it lol

@madmaxracing5788

7 жыл бұрын

Jesse Strader they've been around for 6 or so years

@JesseJessMyster

7 жыл бұрын

thats probably why, i havent ridden much in the last 6 years even though i just bought a new bike. just havent kept up with whats out there.

yeah my 05 yz didn't fit an 08 yz front number plate so I did the top bolt and zip tied the bottom 2

Was looking to do this for my yz! Definitely gonna have to do it it looks so sick. Had the same exact problem with my shrouds to had to break them off I believe lol

@ReturnOfDeeO

7 жыл бұрын

Such a pain! But yeah man that kit looks awesome. It's only cosmetic so to be honest your money is better off going towards suspension or something, but it sure does look great!

hey deeo , do you have any tips for getting the 2 smoke residue off of the back number plate next to the exhuast ?

going to watch this on my lunch. thanks for the entertainment 😸

To tighten the sprocket nut. I take the bike off the stand and put it in gear (back it up into a wall if it still rolls) and use a large crescent wrench. Bike looks sweet 🤘🏻

@ReturnOfDeeO

7 жыл бұрын

That's exactly what we did with the 450! We'll do that with the 125, but it'll just be easier to have four hands working on it and holding it rather than me dropping the damn bike on my head lol

@TrevorJones418

7 жыл бұрын

ReturnOfDeeO HAHAHAHA Im usually the only one working on my bike so ive learned a few things over the years. I can usually get the nut tight but that stupid washer you have to bend down is a pain in my ass every time

I have a 04 YZ125 with big bore kit. to 150cc but I wanna do new plastics what year will fit with little modifications ill have to do for them to fit on bike. I race desert and right now I race my 06 YZ250 full moded but I miss racing my 125 so I wanna do a full rebuild from bottom to top. I've already rebuilt the engine and everything else just need to put new plastics and wait for my new Excel pro black rims with gold tusk hubs & gold nipples just waiting to get done being chew with new heavy duty black spokes for the desert cause regular spokes go by fast out in the desert do to all the rocky conditions we have to race in. Just got my new IMS desert tank with dry brake for quick fill, IMS pegs and works connection skid plate. I'm thinking of doing a LED light bar setup for when I race Glen 24hr and other night races but need to find mount online or fab and weld one up myself. Bike has huge part list from Pro Circuit pipe & silencer & full suspension, Renthal bars & spocket & chain, Boyesen full clutch kit & spectra aluminum cover & water supercooler. Fully rebuilt & jeted carborater with all new fuel & oil hoses. ASV break away levels & new throttle and clutch cables. But still have things I need to get hand guards, grips, anodized gold bolts for whole bike, new seat with factory effex seat cover with ribbing, MSR chain guide, front sprocket guard, Acerbis frame guard with grip, Maxxis maxxcross desert rear tire & Maxxis desert IT front tire, radiator and hoses, radiator guard that with save your life in the desert trust lol if anyone out there is selling a stock seat I can refoam and shape out for myself hit me up asap please. but please anyone that knows what the newest year plastics I can fit on a 2005 yz125 with little modifications hit me up asap as well please will be greatly appreciated. also if you know 2006 yz250 new plastic that will fit that will help to cause mite rebuild that bike after to sale for the new yz250x which is a fuck monster for the off road and desert sense!! if you guys could help me out that would be very cool as hell!!👍👍👍💸💸💸💵💵💵💰💰💰🚬🚬

hey deeo I love your videos and I think the zip tie is for the flappy thing on the number plate

@ReturnOfDeeO

7 жыл бұрын

angus 685 thanks! I don't think it's for that though. It doesn't have a way it could attach with a zip tie

My shrouds were also permanent on my tank, we got a torch, and cut the old plastics with a knife, heat up bolt, and pull it out, there is an insert with inner threads in tank it can come out, if you have any questions just ask!

@ReturnOfDeeO

7 жыл бұрын

Oh wow interesting. Good information, thanks for sharing Julian. It might come to that!

@juliancastillo2465

7 жыл бұрын

ReturnOfDeeO anytime,

On my kaw the front number plate did the same I used a zip tie to hold it in

they look sweet!!!!

i have my 2011 kx250f i thought about doing the 2012 450/2013+ 250f plastics witch would involve a 12+ 450 airbox and then all new plastics some zipties a new seat and a bracket or a newer gas tank for the shrouds.i also thought about getting a yz125 with the alum frame aka 05+ as a second bike

Sick dude

Nice sound

If u want the shrode off. Take a drill with a small drill bit. Drill carefully into the center of the stripped screws. Drill halfway in or so. Reverse the drill. The screw will back out. You will b able to replace your gas tank shrode. That technique works every time. I have successfully done that on my quad with bolts and screws too.

@ReturnOfDeeO

7 жыл бұрын

Gregory Valliere the whole nut is spinning. Drilling the bolt won't do anything as the whole thing will still spin without coming out.

@gregoryvalliere1115

7 жыл бұрын

Can u take a pair of pliers. Grab the end of the shaft. U have the full grip of it. If nothing works out. Maybe the shop where u got the plastics, has a specific tool 4 that. Or at all? Leave it b.

I remember watching the video where you cut the fenders. made it look a lot better.

@catalyst7809

7 жыл бұрын

Do you need to take the wheel off to put on spoke skins? Been looking into some.

@ReturnOfDeeO

7 жыл бұрын

No you don't have to.

Where do you order graphics for these kits

Where did you get the works pipe?

+returnofdeeo what silencer do you have on your 125

I just got the white cycra restyle for my 06 yz125

The ziptie is for the top piece that goes around the bar pad

Hey Deeo. Any luck with the gas tank shrode on th yz125? I wanted to say that I joined your rmfantasymx group. When i entered your group. I was 181 for entry. It will be fun to play with everyone. Aneheim 1 on FS1 at 9:30est., 6: 30pst. I can't wait to watch it. Have you made your picks for fantasymx.

for the front number plate you have to zip-tie the holes together (hence the zip-tie in the kit). I personally don't love the restyle kit. I put on the 2016 plastics for the yz's onto my 2003, and only used the restyle side plates on mine.

the rtech revolution plastic kit comes with a tank but the hole kit isn't cheap at all lol

hey , was wondering where you got your seat cover from ? can only find them with blue strips for the yz

@ReturnOfDeeO

7 жыл бұрын

Guts racing.

"Everywhere we go" by sonreal 6:19 Good music taste :)

Hey bro I have a 2001 yz125 and I’m on a mission looking for a restyle kit for it... do you know of any that work?!

Would it come off if u took a rubber band and put it in the bolt and use the rubber band as if the screwdriver was bigger

@ReturnOfDeeO

7 жыл бұрын

Unfortunately no, it's not just that the screw is sort of stripped, there is also a bolt and it won't come out either. It's something inside the tank holding it on.

Where did you buy those spoke skins?

What settings do you run your gopro on when you ride? I just got the proshot btw.

@ReturnOfDeeO

7 жыл бұрын

720p or 1080p superview.

i knew something was up when u didnt show the whole bike on your snapchat😂

late af but man I have a 2012 yz125 and I'm looking to buy a 2016 plastics. do you think they will fit?

@ReturnOfDeeO

7 жыл бұрын

I'm not totally sure man, sorry!

she looks so much better

Dunno if you ever got the screws out of the gas tank, but my '05 yz125 did the same exact thing before i put restyle plastics on it. The screws that hold the shrouds on thread into metal inserts that the gas tank plastic is then formed around when it was manufactured, but unfortunately it was a poor design because the torque of the screws causes the metal inserts to spin within the gas tank plastic. Fortunately, it's not too hard to get out once you realize this. I just pried up on the shroud with a flathead that i slipped up behind it real close to the screw, and while applying a prying force to it, I twisted the screw with a power drill for a minute or 2 until the inserts that the screws were sorta seized into clawed their way outta the gas tank plastic sockets -- which are dead ends btw -- that is, they don't go through to where the fuel is. Just packed in some Loctite Repair Putty and stuck the inserts back in and let it cure overnight and they've held tight for 2 years now.

@ReturnOfDeeO

6 жыл бұрын

Hey CBH, that's some great info! We actually ran into more problems with the gas tank, with it leaking and stuff, so we bought a whole new tank and obviously that solved the problem on the shroud screws being "stuck." But that's great information to have if it ever happens again on the 125!

I’m trying to get a set for my 99 but can’t find any, u might have an idea of who might have em?

@ReturnOfDeeO

6 жыл бұрын

Not sure. I'd just say check all the popular plastic brands

What kind of year do the graphics have to be to fit the restyle kit?

@ReturnOfDeeO

7 жыл бұрын

They have to be the restyle kit template.

whatta bummer about the shrouds man. still looks great though!

My 02 yz250 left shroud is stuck and it rly pisses me off

the zip tie is used for where number plate wraps around the bars. I did this same project. I just epoxied the number plate to the triple clmp

Does anyone know if this restyle kit only works with the alloy sub frame 125s?

@johnleyva4619

6 жыл бұрын

Seb McCartney works with all yz’s 02-16 I believe

Hey DeeO I was wondering if I could have your old plastics I have the same bike and its the same year.

@ReturnOfDeeO

4 жыл бұрын

Hey there unfortunately I gave them away to other people. Sorry!

Hi friend, I'm from Brazil, and I need to ask a question. I have a YZ 125 2002 I want to leave my bike just like you! This plastic kit is it special?

@ReturnOfDeeO

7 жыл бұрын

The kit is from UFO plastics! You can buy one!

Would you ever do the retro look on the YZ? Just an idea.

@ReturnOfDeeO

7 жыл бұрын

Could be cool, but we'll see.

@ClappedOutMW

7 жыл бұрын

retro graphics wouldnt be a bad idea tbh

@motododo4626

6 жыл бұрын

I am either going anniversary yellow on my 125 or retro all white plastics with red seat and red hoses

zip tie the front number plate??

Are you getting graphics

DeeO! You should get some black rims. And a new exhaust system!

@ReturnOfDeeO

7 жыл бұрын

Okay.

What year is the yz?

Hello 2s brother, where can we order that rear fender and side cover of your YZ125. Watching here from Phillippines

@ReturnOfDeeO

3 жыл бұрын

I got these from UFO!

@clarkfishingride2499

3 жыл бұрын

Website sir? Thanks

you can get the cycra stadium plate, they just zip tie on

@madmaxracing5788

7 жыл бұрын

bobaganooshy they bolt on like any normal front plate, they just have triple clamp protectors that ziptie

@bobaganooshy

7 жыл бұрын

Mad Max Racing Yea the zip ties hold the bottom and the 1 bolt on top. that way he doesn't have to worry about the pins

I think the spoke skins would look decent on the 450 with the red graphics

@ReturnOfDeeO

7 жыл бұрын

Maybe but I'm not going to run them on either bike!

What years have the permanent shroud

@ReturnOfDeeO

6 жыл бұрын

Mine is a 2003, not sure what other years had the same issue.

Is daddy deeo going to ride again

Hey DeeO what was the shipping time for the plastics?

@ReturnOfDeeO

3 жыл бұрын

Not sure man. A dealership actually ordered them and I picked them up from there, so I'm not sure how long the shipping time was!

@anthonybacon1161

3 жыл бұрын

@@ReturnOfDeeO Okay thanks for the info! Appreciate it! Love the vids!🤙🏽

Does the kit come with new bolts?

@ReturnOfDeeO

4 жыл бұрын

Unfortunately no it did not.

Nice gaerne boots!

Nooice!!!

@ReturnOfDeeO

7 жыл бұрын

Thank you CRB!

Is that a plastics to YZ 125 2006 ?

@ReturnOfDeeO

7 жыл бұрын

I'm not sure. Just the UFO restyle kit.

Where can I buy those plastic

@ReturnOfDeeO

Жыл бұрын

UFO Plastics!

I thought deeo was drunk in the beginning😂

@ReturnOfDeeO

7 жыл бұрын

That would have made the even more fun!

Does it work with ttr125?

@ReturnOfDeeO

6 жыл бұрын

Probably not, unfortunately.

If u have a 04 2015 plastics bolt right up

@jelleneelen3667

7 жыл бұрын

Ben Smelcer i have a 04

There's something I just realized. Ur 125 is the same age as me and ur 450 is the same age as my brother

I knew it 😉

@ReturnOfDeeO

7 жыл бұрын

You had a great eye to catch that box in my first video!

i have the same bike and same plastics and i live in pueblo

@ReturnOfDeeO

6 жыл бұрын

NIce man!

Get some graphics that match your 450

Front number plate has a zip tie because the kit don’t fit

What is your kit deco ?

@ReturnOfDeeO

7 жыл бұрын

What do you mean?

@raphcross9041

7 жыл бұрын

Escuse me im frensh

@raphcross9041

7 жыл бұрын

But your stick ??

Can you send me the old plastics and spare parts you wont use

@ReturnOfDeeO

2 жыл бұрын

No, sorry!

How to order

@ReturnOfDeeO

3 жыл бұрын

I think the website would be a good place to start!

MY REAR FENDER IS PISSING ME TF OFF I HOPE THIS SHIT HELPS

that thing needs a rebuild

it looks like a 450 a bit now

How much for the 125 I got 3k in cash and how could I get ahold of you

@ReturnOfDeeO

7 жыл бұрын

If only I had a screen at the end of each video that said something like "Connect with me:" and had ways to contact me, or if I put that information in the description lol. At least 5,000 USD as I am not trying to sell it and we just redid the whole bottom end, plus these plastics.

@Mags4U

7 жыл бұрын

ReturnOfDeeO ok my dad said in income tax time we could do 7k to ship it

@mxvisuals4256

7 жыл бұрын

7k for an 03!? 2017s are 6.5k

@ReturnOfDeeO

7 жыл бұрын

lololol

@ReturnOfDeeO

7 жыл бұрын

Dude right? Beats me but hey if he wants it that badly...

Deeo is faster on the yz than on his 450

@ReturnOfDeeO

6 жыл бұрын

Not true.

@HeyImJorg

6 жыл бұрын

I meant when u first got the Honda lol

@HeyImJorg

6 жыл бұрын

Btw how did u get that custom bar pad

@ReturnOfDeeO

6 жыл бұрын

Still not true. And ordered it online like 12 years ago!

it looks like it needs a new tire pretty bad.

@ReturnOfDeeO

7 жыл бұрын

It does!

perfect timing on the video work was getting boring lol

@ReturnOfDeeO

7 жыл бұрын

Haha glad I could help!

a restyle kit? that's newer plastics for older bikes?

@ReturnOfDeeO

7 жыл бұрын

Correct, more current shape and style plastic that is made to fit the older bike without drilling your own holes or anything.

@dietbargs9517

7 жыл бұрын

nice that's badass

Id love a 125 but i dont think im tall enough, im only like 5' 7 :(

@frassonracing

7 жыл бұрын

Matt Raven youll be fine

@angel.ram9513

7 жыл бұрын

your tall enough i rode a ktm i think it was an 03 but i just couldn't kick it over

@johnathanyinger

7 жыл бұрын

5'5 whats up!

@frassonracing

7 жыл бұрын

5'8 on a 250f

@LAOCExotics

7 жыл бұрын

6'0 on a 250

I was planning to get a ktm 125 bug you might have changed my mind! Looking at that yamaha i might stick with #bLUcRU

Just put grip tape all the way up the frame.

@ReturnOfDeeO

7 жыл бұрын

Doesn't really work on the round steel frame.

@dr187mx

7 жыл бұрын

ReturnOfDeeO You can get bike specific pre cut grip tape or a full sheet, it's a lot more flexible that grip tape for skating.

@ReturnOfDeeO

7 жыл бұрын

dr187mx find me bike specific grip tape for a 2003 YZ 125. Link it here when you do.

@dr187mx

7 жыл бұрын

ReturnOfDeeO UFO makes plastic frame guards too. I put them on my yz and use grip tape on the 450. I sent you a Snapchat of them.

Hand guards are 👎. Looks good though 😄

@ReturnOfDeeO

7 жыл бұрын

scott hannan funny because I think you're 👎🏻

Your pretty weard

@ReturnOfDeeO

7 жыл бұрын

What?

i didnt unsubscibe but i just had to resubsrcibe, smh WTH is youtube even doing