2002 - 2006 Acura MDX Rear Window Regulator Replacement - DIY
amzn.to/3ViMYgS - Power Window Regulator Rear Right Passenger Side with Motor for 2001-2006 Acura MDX
amzn.to/3YNPwGO - Rear Left Driver Side Power Window Regulator with Motor Compatible for 2001-2006 Acura MDX Base & Touring Sport Utility 4-Door
amzn.to/3HXqQp3 - 3M Strip Calk
amzn.to/3WFbA4l - Wera Kraftform Screwdriver Set with Rack and Lasertip (used in the video)
amzn.to/3vdSF56 - MILWAUKEE'S Mid-Torque Impact Wrench
Just a quick video showing how I replaced the rear window regulator on my daughter's 2006 Acura MDX on the passenger side. The plastic piece the holds the cable broke and this caused the window to fall down inside the door and it wouldn't roll up. This is a pretty easy job and you can save some money doing it yourself.
Thanks for watching!
Please subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song used in the video:
'Spooky Boop' by Otis McDonald
How to repair, install, fix, change or replace a broken, cracked, damaged, slow-moving, or stuck power window regulator and motor.
How to Replace Window Regulator '02 - '06 Acura MDX.
Acura MDX - Power Window Problems
How To Replace A Rear Power Window Regulator - Acura MDX 2002, 2003, 2004, 2005, 2006, also same process as Acura TL.
As an Amazon Associate I earn from qualifying purchases.
Пікірлер: 48
You aren’t kidding that it’s a common problem. I’ve had to do this fix 3 times now on my 04 MDX and always watch a tutorial before I go in. Great job on this one!
I am a 48 year old woman and I fixed my car today using this tutorial. Thank you so soo much
@DantheFixitMan
Жыл бұрын
So glad to hear! I am so happy my video helped you! -Dan the Fix it Man
Outstanding video, and no cheesy background music. Simple, concise instructions that just saved me a bundle. Thank you so very very much.👌👌👌
@DantheFixitMan
Жыл бұрын
Thank you, I appreciate the nice comment. Take care, -Dan the Fix it Man
@Jackapoo1
Жыл бұрын
I have subscribed to your channel and look very forward to your next repair video…
First time switching these out and let me tell you just follow step by step with this video and less then an hour you’ll be done swapping out both!!! Thanks for the video boss!!!
Great video, this is the second time to replace an MDX window and following along this video, I was done in an hour. I even took still photos with my camera to work in stages and came back to the video for confirmation. Dan The Man!!!!
Great step by step instructions. Afraid to tackle this but your video made it so easy to tackle . Great job.
Thank you for this video ... changed mine yesterday like I knew what I was doing! Saved me a lot dollars
Great video! Couldn’t have done it without your help! It took me a lot longer to get the duct tape residue off that the regulator install took. The zip tie to keep the long cord in place was smart. Thank you!!!
Thanks for this wonderful and informative clip showing every step in replacing the motot/ regulator. I just did the replacement this morning following the instructions and illustration. It works great. Thanks again Dan.
@DantheFixitMan
Ай бұрын
Happy to hear my video helped! Take care, -Dan
My 02 Acura tl rear passenger window won’t roll back up. So this was very helpful. Now to try my best to fix it
@kaylawalton7638
11 ай бұрын
How did it go? Mine just fell down and won’t come back up 😭
Thanks for the content. Glad to see you use correct plastic pry tools for working on interior trim.
This is the most helpful video i think I've ever seen on KZread 10/10
@DantheFixitMan
5 ай бұрын
Thank you so much!
Great video - helped me get the replacement done in less than an hour. Thanks for posting this! I took a picture from the inside of the door to visualize the orange clip to know where to squeeze. It came right out. My replacement regulator had all the clips and did not have different threads on the bolts, even though it came with two pre-installed in the keyhole locations - one on the motor and one on the bracket. These bolts had blue locktite on them as well. One helpful trick - WD40 will get tape goo off of the glass easily.
@DantheFixitMan
11 ай бұрын
Glad to hear! And thx for the tip on the wd40 to remove the tape residue. Take care, -Dan the Fix it Man
You're the best on this fix!
saved me $325 bux my man! thank you!
@DantheFixitMan
Жыл бұрын
Happy to hear that my video helped save you some money! Thanks for watching! Take care, -Dan the Fix it Man
Great video. Doing this repair today on my brother's Acura. Thanks so much for sharing this.
Thank you! Now I can fix my window this week!!
This is the best Video on KZread for window motor replacement. Thank you very much. 👍
thanks for the strip caulk sounds like three men. I use windex to clean out/off the felt rubber track on all sides of window, then use a product like "camp dry" or other outdoor fabric waterproofer aerosol spray on those felt gasket tracks and it gives the regulator an easier job going up and down. doing this on an old door window helps extend life of a regulator/motor. my 2 cents
Thanks! Very useful and clear steps
Helped me immensely!! Thank you!
Very detailed and helpful, Thank you!
Thank you! Great video.
I just changed my back breaks and now my right window cannot roll up. 😩
@BryChavez99
10 ай бұрын
Rear Brakes*
great job on the video, clear video and easy instructions...You're very helpful
Thank you for saving me several hundred dollars!
@DantheFixitMan
22 күн бұрын
@@Pauserewindff so happy to hear that my video helped you save some money! Take care, -Dan
God bless, you Dan. Thank you so much!
Best video ever. Thank you so much for the video!!
Thank you bro 🔥🔥🔥🔥🔥
Thank you master!!!
instead of tape I use a few rubber door stops from walmart or hd wedged into the outside of door to keep window up, seems to work if working alone
Awesome Thank you
dude. that method of keeping the window UP is dinosaur. the best and only way is to use SUCTION CUPS.
I have a 04 MDX, i was rolling it up i heard a sound and then the rear window fell down. Youre saying most likely the plastic thing in the regulator broke, and not just slipped or moved?
Dan; thanks ,great instructions. In your opinion could slamming a door make the plastic piece break? Or is plastic becoming brittle with age?
@DantheFixitMan
23 күн бұрын
@@handyman3823 yes, that would do it, especially if as the plastic gets older and more brittle…
Thank you for the video and excellent commentary! I watch so many of these car repair vids and yours is one of the best. The lighting, step by step instructions, and proper camera angles makes all the difference.
@DantheFixitMan
Жыл бұрын
Thank you so much! Take care, -Dan the Fix it Man