How to replace the upper ball joint on a Crown Victoria and Grand Marquis 1998 and up.
Жүктеу.....
Пікірлер: 57
@jerrybockes47697 ай бұрын
Thank u so much for the video and explaining everything in detail. I’ll be doing my 2000 grand marquis here soon and I’ll be watching this video and doing it as u do lol
@zeeza73 жыл бұрын
thank you very much .... just broke my upper ball joint yesterday ..... good thing it happed as I was pulling in front of the house ... now I know what has to be done and also it gives me an idea on how to stabilize the suspension to be loaded onto a car hauler ...
@mjdennehy5692 Жыл бұрын
The bolt you hammer out is very difficult. I wedged a bar against it so it would not move as much on every blow to the bolt. Good luck.
@paulgunther69302 жыл бұрын
sweet, time to do mine
@alfonsocantu53304 жыл бұрын
Dude your awsome...other videos were crap...yours was good
@sleepercaprice1 Жыл бұрын
When I did mine on my '01 Crown Vic, I made the marks on the adjustment washers right where they meet. They were close enough that the alignment was right on and didn't need any adjustment.
@dtnel4 жыл бұрын
Lucky you. Did studs on right side of car and right upper ball joint yesterday when the guy called, I went on site to fix it (mobile). He's bringing it over today so I can do drivers side upper ball joint, idler arm and drag link.
@michaelreece4584 жыл бұрын
Excellent...one of the best repair videos that l have seen here on KZread.
@fecklarjenkins25493 жыл бұрын
Didn’t need to take the brakes off
@codyhamilton45303 жыл бұрын
Doing this in the morning
@stevepearson87637 жыл бұрын
Wow! nice surprise today. Good to have you back.
@evidentlowkey7007 Жыл бұрын
Wish I can see from the top so I can see your mark I know it don’t have a gap on it
@mafatone3 жыл бұрын
God forbid if Ford spent $0.09 on grease fittings.
@gordaboyifyable3 жыл бұрын
Great vid!! Thanks
@metalsculpturesbytrdesigns7732 Жыл бұрын
I think you meant 460 cubic
@ontarioman1007 жыл бұрын
Great to see you back Zeph look forward to more vlogs Happy New Year to you.
@johnoflaherty25987 жыл бұрын
He's back in the saddle again! Nice to see you again on YT. Hope you enjoyed your hiatus and are inspired to show us new interesting things. Hope the '69 Gal is coming along okay.
@zephmont
7 жыл бұрын
It was a nice vacation, had to take care of some things in my personal life but it feels good to be back. Don't worry I'll fill you in on the 69 Galaxie.
@johnoflaherty2598
7 жыл бұрын
Okay... that's cool. No ultra rush, just glad to see you back.
@link52j6 жыл бұрын
Thanks buddy I enjoyed watching your videos
@Corvette16587 жыл бұрын
Welcome back Zephmont nice to see you again.
@zephmont
7 жыл бұрын
It feels good to be back. Thanks.
@VOOODOOO377 жыл бұрын
Nice to see your videos again, I did this same job on my 01 Town Car, total manual labor lol. My 2006 Town Car has a more robust front end, and the ball joints can't be replaced, only the control arms, kinda sux
@mike116827 жыл бұрын
always enjoy your vids
@trutube59554 жыл бұрын
I replaced my lowers and uppers are next will it have to be aligned again?
@vmans43743 жыл бұрын
Nice now I’ll know what to do thanks 🙏🏼
@chancebubier4957 жыл бұрын
YOUR BACK
@talfacprez7 жыл бұрын
Welcome Back!!
@zephmont
7 жыл бұрын
Thanks!
@hotdogs52655 жыл бұрын
Thanks man!
@toddgilmore1186 жыл бұрын
your supposed to torque these bolts.. 90 ft. lbs for side bolt pin, and 118 ft.lbs. I believe it is for cams. But I suppose if you don't own a toque wrench just use brawn!!
@kudanrt
5 жыл бұрын
Thank you for that info! I'm about to work on my Lincoln's Upper Ball Joint. 0:)
@tonyfelder3195
4 жыл бұрын
Todd Gilmore does it really matter if you torque it or not
@michaelreece458
4 жыл бұрын
Use a German torque wrench....guttentight
@carltorjusen558
2 жыл бұрын
@@michaelreece458 WONDERBAR..YA
@caseysklodowski66627 жыл бұрын
dont know if u still need one. but on ebay right now the have back fender ends for your galaxie 40 for the pair
@zephmont
7 жыл бұрын
I'll check that out. thanks.
@GlynRobinson6 жыл бұрын
the shortcuts that engineers take not installing a greasable joint to start with.
@hectorh.1341 Жыл бұрын
Don’t hammer metal to metal! Use a piece of wood or a brass hammer!!
@greglambo36 жыл бұрын
How was the Alignment ?
@randolando4047 жыл бұрын
Hey I was wondering, what size pipe did you have on the 81 Lincoln when it had the 302 and what thrush glass packs too cause I have a 90 ltd crown Vic that is gonna need a new exhaust by springtime as the salt here in New England has rusted out the muffler, and some of the piping looks like it might be on its way out to. I know I might be able to find the thrush at an affordable price for me cause I'm still in high school and will have to save up for awhile regardless for an exhaust. Thanks man love the videos!
@zephmont
7 жыл бұрын
Thanks man. I had a 2 inch exhaust on it and I used the basic thrush glass packs. They are just a straight though muffler powder coated red. I got mine at auto zone for $20. Depending on where you go you can get the exhaust done relatively cheap. I got the exhaust done on my 69 Galaxie (entire system) for $400 and around here, that is a really good deal.
@randolando404
7 жыл бұрын
Zephmont thanks for the help man I really appreciate it. It's my project to keep the car one the road and in good shape I found out in my state it's one of 70 left on the road and the rest of them have been crushed not even the junkyards in my area kept them around. I've been watching a lot of your videos for awhile and it's been a big help keeping it on the road.
@CrazyBritishbitch33
Жыл бұрын
@@zephmontMy fucking God your videos suck, you don't even have the slightest clue of what you're doing.
@BassheadGTP7 жыл бұрын
Where the hell ya been?
@zephmont
7 жыл бұрын
Entered a new chapter in my life. I'll fill you in later.
@rabiit19733067 жыл бұрын
did u get a other crown vic???
@zephmont
7 жыл бұрын
Nope, still have the Grand Marquis
@nightrider-gf2sr6 жыл бұрын
He did not torque it in it has to be torque top bolts at 118 pounds in the bottom one at 90 pounds
@tonyfelder3195
4 жыл бұрын
nightrider 2000 does it matter and why
@Tomek19856 жыл бұрын
what brand they are?
@zephmont
6 жыл бұрын
Certified which is a cheap brand store brand here in Canada and the cost was $40 a piece. I priced out the Moog one but they are $140 a piece.
@4.6ljonvlogs127 жыл бұрын
idiots at the alignment shop left my camber bolts loose on my Lincoln
@zephmont
7 жыл бұрын
Those idiots. Hope they gave you some compensation for that.
@carltorjusen558
2 жыл бұрын
They need a brain alignment after their nuts are torqued up...
@dyoel1825 жыл бұрын
Do the uppers seem to be the more common problem compared to the lowers? Were you control arm bushings on either side doing okay?
Пікірлер: 57
Thank u so much for the video and explaining everything in detail. I’ll be doing my 2000 grand marquis here soon and I’ll be watching this video and doing it as u do lol
thank you very much .... just broke my upper ball joint yesterday ..... good thing it happed as I was pulling in front of the house ... now I know what has to be done and also it gives me an idea on how to stabilize the suspension to be loaded onto a car hauler ...
The bolt you hammer out is very difficult. I wedged a bar against it so it would not move as much on every blow to the bolt. Good luck.
sweet, time to do mine
Dude your awsome...other videos were crap...yours was good
When I did mine on my '01 Crown Vic, I made the marks on the adjustment washers right where they meet. They were close enough that the alignment was right on and didn't need any adjustment.
Lucky you. Did studs on right side of car and right upper ball joint yesterday when the guy called, I went on site to fix it (mobile). He's bringing it over today so I can do drivers side upper ball joint, idler arm and drag link.
Excellent...one of the best repair videos that l have seen here on KZread.
Didn’t need to take the brakes off
Doing this in the morning
Wow! nice surprise today. Good to have you back.
Wish I can see from the top so I can see your mark I know it don’t have a gap on it
God forbid if Ford spent $0.09 on grease fittings.
Great vid!! Thanks
I think you meant 460 cubic
Great to see you back Zeph look forward to more vlogs Happy New Year to you.
He's back in the saddle again! Nice to see you again on YT. Hope you enjoyed your hiatus and are inspired to show us new interesting things. Hope the '69 Gal is coming along okay.
@zephmont
7 жыл бұрын
It was a nice vacation, had to take care of some things in my personal life but it feels good to be back. Don't worry I'll fill you in on the 69 Galaxie.
@johnoflaherty2598
7 жыл бұрын
Okay... that's cool. No ultra rush, just glad to see you back.
Thanks buddy I enjoyed watching your videos
Welcome back Zephmont nice to see you again.
@zephmont
7 жыл бұрын
It feels good to be back. Thanks.
Nice to see your videos again, I did this same job on my 01 Town Car, total manual labor lol. My 2006 Town Car has a more robust front end, and the ball joints can't be replaced, only the control arms, kinda sux
always enjoy your vids
I replaced my lowers and uppers are next will it have to be aligned again?
Nice now I’ll know what to do thanks 🙏🏼
YOUR BACK
Welcome Back!!
@zephmont
7 жыл бұрын
Thanks!
Thanks man!
your supposed to torque these bolts.. 90 ft. lbs for side bolt pin, and 118 ft.lbs. I believe it is for cams. But I suppose if you don't own a toque wrench just use brawn!!
@kudanrt
5 жыл бұрын
Thank you for that info! I'm about to work on my Lincoln's Upper Ball Joint. 0:)
@tonyfelder3195
4 жыл бұрын
Todd Gilmore does it really matter if you torque it or not
@michaelreece458
4 жыл бұрын
Use a German torque wrench....guttentight
@carltorjusen558
2 жыл бұрын
@@michaelreece458 WONDERBAR..YA
dont know if u still need one. but on ebay right now the have back fender ends for your galaxie 40 for the pair
@zephmont
7 жыл бұрын
I'll check that out. thanks.
the shortcuts that engineers take not installing a greasable joint to start with.
Don’t hammer metal to metal! Use a piece of wood or a brass hammer!!
How was the Alignment ?
Hey I was wondering, what size pipe did you have on the 81 Lincoln when it had the 302 and what thrush glass packs too cause I have a 90 ltd crown Vic that is gonna need a new exhaust by springtime as the salt here in New England has rusted out the muffler, and some of the piping looks like it might be on its way out to. I know I might be able to find the thrush at an affordable price for me cause I'm still in high school and will have to save up for awhile regardless for an exhaust. Thanks man love the videos!
@zephmont
7 жыл бұрын
Thanks man. I had a 2 inch exhaust on it and I used the basic thrush glass packs. They are just a straight though muffler powder coated red. I got mine at auto zone for $20. Depending on where you go you can get the exhaust done relatively cheap. I got the exhaust done on my 69 Galaxie (entire system) for $400 and around here, that is a really good deal.
@randolando404
7 жыл бұрын
Zephmont thanks for the help man I really appreciate it. It's my project to keep the car one the road and in good shape I found out in my state it's one of 70 left on the road and the rest of them have been crushed not even the junkyards in my area kept them around. I've been watching a lot of your videos for awhile and it's been a big help keeping it on the road.
@CrazyBritishbitch33
Жыл бұрын
@@zephmontMy fucking God your videos suck, you don't even have the slightest clue of what you're doing.
Where the hell ya been?
@zephmont
7 жыл бұрын
Entered a new chapter in my life. I'll fill you in later.
did u get a other crown vic???
@zephmont
7 жыл бұрын
Nope, still have the Grand Marquis
He did not torque it in it has to be torque top bolts at 118 pounds in the bottom one at 90 pounds
@tonyfelder3195
4 жыл бұрын
nightrider 2000 does it matter and why
what brand they are?
@zephmont
6 жыл бұрын
Certified which is a cheap brand store brand here in Canada and the cost was $40 a piece. I priced out the Moog one but they are $140 a piece.
idiots at the alignment shop left my camber bolts loose on my Lincoln
@zephmont
7 жыл бұрын
Those idiots. Hope they gave you some compensation for that.
@carltorjusen558
2 жыл бұрын
They need a brain alignment after their nuts are torqued up...
Do the uppers seem to be the more common problem compared to the lowers? Were you control arm bushings on either side doing okay?
@davelawrence39
5 жыл бұрын
Lower is common