These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. 요즘 댓글에 "메일주소"가 들어가면 댓글이 스펨으로 자동 분류되어 댓글이 자동으로 삭제됩니다. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. 자동삭제되면 제가 볼수가 없어서 요청하신 도면발송이 불가능해집니다. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". 도면 수신을 원하시는 분은 메일(treean.wood@gmail.com)로 도면 요청해 주시고 Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. 댓글에 "도면 요청을 메일로 보냈습니다." 이라고만 적어 주시면 확인후 시간나는데로 꼭 보내드리겠습니다. Thank you. 감사합니다.

@cryforchange5900

Жыл бұрын

도면 요청했습니다

@AnthonyBugaoan

Жыл бұрын

I sent you an email

@user-doto

10 ай бұрын

도면 요청을 메일로 보냈습니다

@neuron1488

5 ай бұрын

Отправь мне чертежи пожалуйста

@alinawazmangwano1902

4 ай бұрын

Hello dear I have sent you drawing request by e-mail. Thanks

I am at this moment consulting your video again, I have made the main part (the right angle arm piece-I have a lot of White Oak doing nothing and I have used that), oh, and I have just made the slider piece that carries the scroll blade mechanism, I was just looking to confirm that it runs up and down level with the surface of the slot that it slides in. I am glad that I have finally begun making a scroll saw (I have seen many different video's about it) but it is yours that has finally got me going. I like it a lot because of the idea of the blade control mechanism and that is the only area of movement, no arms going up and down like in other scroll saw types. Right, I am getting back to it now. I will keep you updated.

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

I've seen this type of build several times but this is the best one yet Bravo well done

@TreeAnWood

4 жыл бұрын

Thank you for the compliment. 👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

@TreeAnWood

4 жыл бұрын

If you are going to make it, i recommend that use 8mm steel bushings instead of LM8UU bearings. The LM8UU bearings seem to be damaged due to their weak durability.

Hola... Felicidades!!! Por un excelente trabajo muy bien ejecutado y un magnífico resultado final... Es una de las mejores creaciones de Sierra de marquetería que e visto crear... La construcción está muy bien pensada y desarrollada, además los elementos que has utilizado son de unas dimensiones muy adecuadas y por tanto la terminación es muy robusta y el resultado final es Genial... Y con una magnífica presencia para la vista... Felicidades!!! Muchas gracias por compartir este video y por dejar todas medidas y el despiece de todos los componentes necesarios. Gracias... Saludos Cordiales... Te has ganado un nuevo y Fiel Suscriptor Tuyo...

@TreeAnWood

4 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Excellent Craftsmanship... Keep up your great work.

Beautiful job!! I never thought you could do both cutting tools in the same system!!

@reynaldobustos1

3 жыл бұрын

Could you please send me the plans?? Thanks a lot for sharing! reynaldobustosmartinez@gmail.com

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Outstanding tutorial - superior teaching of method! Many thanks for sharing.

Extremely accurate and detailed DIY video for Scroll Saw and Jigsaw Table; I have sent you a separate email for the drawings!

Muito bom. Parabéns. Obrigado por compartilhar. Vander de Montes Claros, MG, Brasil

감사히잘보았읍니다. 구독 합니다

@TreeAnWood

2 жыл бұрын

관심 가져주셔서 감사드립니다. 👍 혹시 도면을 요청하셨나요??? 요즘들어 댓글이 스펨으로 자동 분류되어 삭제되는 현상이 자주 발생되고 있습니다. 제가 지우는 것은 절대 아니니 오해 없으시길 부탁드립니다. 혹시 댓글을 1분안에 바로 삭제되면 제 메일(treean.wood@gmail.com)로 도면 요청해 주시면 시간나는데로 꼭 보내드리겠습니다. 감사합니다.

Que número de sierra o hilo de metal es la que se usa para cortar ese grueso de madera??

Its 2 years since the video. How is the machine holding up?

답글 고맙습니다 구경 갑니다

@TreeAnWood

3 жыл бұрын

관심 가져주셔서 감사드립니다. 👍

Felicitaciones , muy bien esplicado, gracias por el trabajo, Alfredo

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you. I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Muy Buen Video. *¡¡¡ BUEN TRABAJO !!!*

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

bonjour .superbe video tres explicative.votre plan me serai tre utile .merci

유익한 영상 잘보고 갑니다.

@TreeAnWood

2 жыл бұрын

요즘 댓글에 "메일주소"가 들어가면 댓글이 스펨으로 자동 분류되어 댓글이 자동으로 삭제됩니다. 자동삭제되면 제가 볼수가 없어서 요청하신 도면발송이 불가능해집니다. 도면 수신을 원하시는 분은 메일(treean.wood@gmail.com)로 도면 요청해 주시고 댓글에 "도면 요청을 메일로 보냈습니다." 이라고만 적어 주시면 확인후 시간나는데로 꼭 보내드리겠습니다. 감사합니다.

Demasiado campo de encuadre. *¡¡¡ ACERCA MÁS LA CÁMARA !!!* LIKE.

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

선생님 빠른답글 감사합니다 알리익스프레스에서 열심히 찿아 보겠습니다 수고하세요

@TreeAnWood

3 жыл бұрын

감사합니다. 좋은하루 보내세요. ^^

Excelente felicitaciones Maestro Venezuela gracias saludos

@TreeAnWood

4 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Parabéns...., que engenhoca kkk, ADOREI a ideia, vou ver de fazer uma destas, aproveitarei suas ideias! Abraço aqui do Brasil 🇧🇷

@TreeAnWood

4 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

@valterleao6795

4 жыл бұрын

Tree-An Wood Ficarei no seu aguardo! Forte abraço

Very good and helpful video. Look forward to seeing more b

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍

Excelente trabajo estoy siguiendo este arte de la carpinteria ya e hecho unos trabajos y herramientas y esta d me seria muy útil, claro que solicito los dibujos de este herramienta, gracias de antemano siga adelante,muchos éxitos les desea este servidor, desde la Provincia de El Oro Ecuador.

@TreeAnWood

3 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍

Excelente aporte 👍🏼

@TreeAnWood

2 жыл бұрын

These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you.

Congratulations on your constructions. I would like to ask if the double glue on the saw is stable and does not leave during the cutting of the wood. Thanks.

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 Separation may occur when only glue is used. It is recommended to fix with a pin or weld if there is a welding machine. I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

@xronisdimopulos4147

3 жыл бұрын

@@TreeAnWood Thank you for answering me

excellent 도면 요청을 메일로 보냈습니다

@TreeAnWood

2 жыл бұрын

요청하신 파일을 보내드렸습니다. 관심 가져주셔서 감사드립니다. 👍 이 영상을 보시는 분들께 조금이나마 도움이 되었으면 합니다. 이 영상이 마음에 드셨으면 구독과 좋아요도 부탁드릴께요 ^^ 이 외에도 많은 영상이 있으니 관심 있는 분들은 한번 구경오세요 ^^ 요즘들어 댓글에 메일주소가 들어가면 스펨으로 자동 분류되어 삭제되는 현상이 자주 발생되고 있습니다. 제가 지우는 것은 절대 아니니 오해 없으시길 부탁드립니다. 혹시 댓글을 1분안에 바로 삭제되면 제 메일(treean.wood@gmail.com)로 도면 요청해 주시면 시간나는데로 꼭 보내드리겠습니다. 감사합니다.

Отличный станочек получился!👍

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

@user-zi1ny2zq2s

3 жыл бұрын

@@TreeAnWood Спасибо большое,с большим интересом смотрю ваши поделки и приспособления,продолжайте в том же духе!🤝

How can I get the detail drawing? Norman Joslyn

답글 잘 받았습니다 다른 DIY도 구경 하겠습니다 열심히 만들어 보겠습니다

@TreeAnWood

3 жыл бұрын

감사합니다. 화이팅 ^^

Buna seara superb ce urmăresc ,Felicitări ♥️ !.

@TreeAnWood

4 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

me parece genial los tutoriales que he visto en este momento me interesa los dibujos de la sierra de calar y mesa de sierra 2 en 1 muchas pero muchas gracias por orientarnos a las personas que queremos empezar este bello oficio de la carpinteria

@TreeAnWood

3 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍

직쏘와 스크롤쏘를 한방에 해결 하셨네요. 저도 도면 부탁 드립니다. 감사합니다.

@TreeAnWood

2 жыл бұрын

요청하신 파일을 보내드렸습니다. 관심 가져주셔서 감사드립니다. 👍 이 영상을 보시는 분들께 조금이나마 도움이 되었으면 합니다. 이 영상이 마음에 드셨으면 구독과 좋아요도 부탁드릴께요 ^^ 이 외에도 많은 영상이 있으니 관심 있는 분들은 한번 구경오세요 ^^ 요즘들어 댓글에 메일주소가 들어가면 스펨으로 자동 분류되어 삭제되는 현상이 자주 발생되고 있습니다. 제가 지우는 것은 절대 아니니 오해 없으시길 부탁드립니다. 혹시 댓글을 1분안에 바로 삭제되면 제 메일(treean.wood@gmail.com)로 도면 요청해 주시면 시간나는데로 꼭 보내드리겠습니다. 감사합니다.

안녕하세요 오늘 작업을 마무리 했습니다 둘중에 스크롤쏘가 마음에들어요 신퉁방퉁 합니다 이제는 홀다운 클램프에 도전 감사 합니다

@TreeAnWood

3 жыл бұрын

제가 기분이 다 좋네요~~~ 저도 스크롤쏘가 참 맘에 들더라고요......... 다른 DIY도 많이 있으니 한번 구경오세요 ^^ 구독과 좋아요도 부탁드릴께요~~

parabens ao criador dessa maravilha de serra tico tico 2 in um, de todas que eu já vi, essa para mim é dez. gostaria de receber o desenho, pois com certeza farei uma identica para mim, com as mesmas medidas.

@TreeAnWood

3 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍

parece uma beleza.

@TreeAnWood

4 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

I don't want to give my email address out to KZread. Is there another way to get drawings?

@TreeAnWood

2 жыл бұрын

These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you.

Soy de Uruguay gracias

Ellerine sağlık ustam çok kullanışlı olmuş hem dekupaj testeresi hem de kıl testere

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Thanks in advance, I wait patiently for the drawings to come to me

@alanpinturas6385

11 ай бұрын

Por favor me envie o projeto

What happens to the Piston when the blade breaks does it shoot off into the room

@TreeAnWood

3 жыл бұрын

When the blade is broken, the piston may bounce upwards slightly, so please be careful !!! Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

That was a lot of fun thanks

@TreeAnWood

4 жыл бұрын

Thank you for the compliment. 👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

muchas gracias por su trabajo y su generosidad en trasmitir el conocimiento. Me gustaría recibir la hoja pdf.

Excelente

@TreeAnWood

4 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

직쏘날 구멍 뚷는 방겁좀 알려주세요 용접은 녹아서 안되고 열처리로 약끼를 뺀다고 뺏는데도 기리만 뭉그러지고 안뚫리네요.

@TreeAnWood

2 жыл бұрын

안녕하세요. 저도 뚫는데 처음 잘 안 뚫렸는데 열처리된 강한 기리로 해서 성공했습니다. 용접또한 살짝 테크만 해야됩니다. 조금만 오래하면 녹아버리더라고요. ^^;

@user-hs3tn5ef3p

2 жыл бұрын

@@TreeAnWood 토치 2개로 열을가해 식혀서 뚫고 다시 열처리 했습니다 답글 감사합니다.

Good job. I was able to make one automatic that works on 12 volts.

@TreeAnWood

3 жыл бұрын

I wish you success :) Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Hello I just found out a comment I had for you 4 days ago I put on the wrong video, sorry, here it is now _ (and this would go before my previous comment).... "This is great because I thought to myself I just want to be able to make a scroll saw blade go up and down with enough speed and travel (but NOT the levers type mechanism whereby can cause excessive vibration throughout the mechanism and wobble in the blade) and I can come up with a sturdy frame /table assembly myself, probably drill powered but then need mechanism to go from rotation to linear (up and down). Using a jigsaw is a great method, already got up and down movement, speed, enough power for the job PLUS can use it to power scroll saw or use it as it is but I am going to make THIS machine because it is great, I really like it. PLUS I recently bought a mains powered drill which I wasn't happy with as soon as I used it so I can take it back and get a scroll saw. Happy Days. Thanks for this video".

@TreeAnWood

3 жыл бұрын

If you are going to make it, Although LM8UU bearings were used in the video, i recommend that use 8mm self lubricating bushing instead of LM8UU bearings. The LM8UU bearings seem to be damaged due to their weak durability. I will try to reward you with better videos. Thank you. 👍

Cool, like this!

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Hi Tree-An Wood please could you send me the plans for the scroll & jigsaw table. I am really happy that this can be made without needing to weld any parts many thanks. Can't wait to get get making this new addition to my workshop

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍

안녕하세요 새해 건강하세요 LM8 uu 베어링을 윤할부싱으로 교체 하는데 있어 베어링 점포에서 물어보니 주인은 잘 모르더라고요 어디에서 구입을 하는지 알려주시면 고맙겠습니다

@TreeAnWood

3 жыл бұрын

새해복 많이 받으세요. 죄송한데 윤할부싱(Self Lubrication Bearing Bushing) 국내 구입처는 잘 모르겠습니다. 저는 알리익스프레스에서 구매했어요. www.aliexpress.com/item/32964129011.html?spm=a2g0s.9042311.0.0.27424c4dl0bHna 링그 남겨드릴테니 한번 들어가 보세요. 감사합니다.

Saludos, planos recibidos, mil gracias. Hasta pronto.

buenas,estaba pensando en hacerme una de estas y tu diseño me parece el mas completo. podrias pasarme los planos a ver si consigo hacermela? gracias

@juankijotace9904

3 жыл бұрын

jayce0002@gmail.com

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

👍

Que mola usou ?

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I just used a spring with proper tension. I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

님 덕분에 주먹장 지그,푸쉬블록을 만들어봤고 오늘은 저에겐 좀 난이도가 있는 직쏘 스크롤쏘 테이블을 만들었습니다 감사합니다 그런데 처음엔 진동이 너무 심해서 사용을 하기엔 위험해서 포기했었는데 스프링 텐션을 좀 약하게 하니 아주 만족스럽네여 거듭 감사합니다 그래도 제가 새가슴이라 스크롤 쏘 사용시 안전 커버를 정면에 장착할까 합니다 사진으로 님 검수도 받고 싶은데 방법이 없어 아쉽네요 다음엔 또 뭤을 만들까나

@TreeAnWood

3 жыл бұрын

이렇게 열혈 구독자님을 만나뵙게 되네요~~~ 진심으로 감사드립니다. 👍 또한 결과에 만족하시다니 컨텐츠 제작에 대한 보람을 많이 느끼게 되네요 ^^ 요즘 본업이 바빠서 DIY부분을 잘 못 올리고 있으나, 차후 지속적으로 업데이트 할 계획이니 꾸준한 관심 부탁드립니다. ^^

gostei muito quero muito receber esse projeto completo....

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Thanks a lot

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍

Would like png file of 2 in 1 Scroll Saw & Jigsaw Table

@TreeAnWood

3 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍

mil gracias con mil bendiciones por este excelente video, por favor necesito las medidas

@TreeAnWood

3 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍

I watched your 2 in 1 saws and was fascinated that the jig saw can be converted to have a scroll saw by it. You have shown the measurements in the video; I wish if you can make it in a PDF form amateurs like me can venture in making one with the help of a carpenter. Further you have shown using the pinned saw blades in the video and its related blade holder; I am getting plain saw blades i my area (Tamilnadu/South India) . Can you please guide me to make holders for pin less scroll saw blades. Hope I will be encouraged if I get your response.

@TreeAnWood

3 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍

@viswanathanramakrishnan7613

3 жыл бұрын

@@TreeAnWood My e-mail id is: pawanivr@yahoo.com.

@viswanathanramakrishnan7613

3 жыл бұрын

@@TreeAnWood Thank you so much for your immediate attention to my query.I have provided my email ID seperately.

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

@viswanathanramakrishnan7613

3 жыл бұрын

@@TreeAnWood I am extremely happy that I have got your great attention to my request. I will go through the same once I sit with the laptop today. Once again many many thanks to you.

Gostei muito de seu projeto, ficou top. Gostaria de receber o desenho em pdf

@TreeAnWood

3 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍

ممتاز

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

👍👍 thx master 😊

@TreeAnWood

2 жыл бұрын

Leave your just email address in the comments and i will send you the drawing file. (You must leave just your email address in the comments so that I can see it in the notification even if it is deleted.) Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

Fenomenalno....

@TreeAnWood

2 жыл бұрын

Leave your just email address in the comments and i will send you the drawing file. (You must leave "just" your email address in the comments so that I can see it in the notification even if it is deleted.) Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

Very good

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Hi Tree-An Wood. I sent you a drawing request by e-mail. Thank you very much and keep up the great work.

@TreeAnWood

2 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

Hola. Muy bueno tu trabajo. Podrías enviarme el archivo ?

I'm currently in need of a good manual to help me develop my new wood work experience and I'm also trying to find ways of creating my best work shop at home. When I try to make a good shopping list to order everything I can't keep up with the course. The thing I to search for for yesterday around Weston-super-Mare were the deep groove ball bearing every single shop were completely usluce they had never heard of such a thing. Anyway after watching your real course today could you please send me one of those emails.

Meus parabéns muito bom maravilhoso e mais importante é q vc colocou as medidas só tenho 71anos a visão já não é a mesma e não dava p.ler as medidas tentei com lupa e não consegui por favor si der p.mandar o projeto com numeração maior eu ti agradeço e Q.Deus continue te abençoando e ti usando p.enviar mais vidios fique com Deus e um ótimo 2021repleto de paz saúde

@TreeAnWood

3 жыл бұрын

Please provide your email address and i will send you the drawing file. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

good idea

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Hola amigo me puedes compartir tu archivo de elaboración de esa formidable máquina por favor te veo desde Puebla , México.

Good job

@TreeAnWood

4 жыл бұрын

Thank you for the compliment. 👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

@andruszyk76

4 жыл бұрын

Tree-An Wood Thank You so much 🙏 ☯️ for helping me.

Saludos, magnífica obra de arte; le envíe una solicitud de obsequio de planos (dibujo), con el fin de realizar la obra. Mil gracias por su gentileza.

Hi. Could I have a copy of the drawings please Thanks.

@TreeAnWood

3 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍

These are some awesome builds that you do. Thank you so very much

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍

I would like for you to get that info thanks in advance

Belo trabalho, gostaria de receber um desenho .

@TreeAnWood

2 жыл бұрын

Leave your just email address in the comments and i will send you the drawing file. (You must leave "just" your email address in the comments so that I can see it in the notification even if it is deleted.) Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

do you have detailed size and material boss? Fromindonesia.. Your video amazing Your is the best

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

@manusiapurba7529

3 жыл бұрын

thank you friend success for you

@manusiapurba7529

3 жыл бұрын

Mr... how many mm long is the scroll saw blade?

molto ben fatto. Mi puoi mandare il png per favore?

Saya perlu gambarnya ..thanks

Molto utile e interessante, gradirei ricevere disegno dimostrativo delle dimensioni e materiali necessari. Grazie

@TreeAnWood

3 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍

@benedettosinibaldi1334

3 жыл бұрын

@@TreeAnWood benedetto.sinibaldi@gmail.com grazie

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Una Maquina muy util. Me gustaria tener los planos

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

เก่งๆๆๆๆ

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Boa noite, caro mestre da arte da marcenaria, preciso muito te dizer o quanto você é generoso e atencioso, e vou agradecendo muito essa sua disposição em ajudar. Aproveitando que você ofereceu o desenho, te enviei um e-mail de solicitação. Acho seus trabalhos são fantásticos e tento copiá-los. Abraços e tudo de bom para você!

@TreeAnWood

2 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

Harika

@TreeAnWood

2 жыл бұрын

These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you. I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Very good friend, I want to try making it, can you send me the size

Por favor envíeme el archivo de dibujos de esta maquina artesanal...Muchísimas GRACIAS.

Best video! Can u send me some plan about? Thank you!

ماشاء الله عمل ممتاز ارجو ارسال الرسم

@TreeAnWood

2 жыл бұрын

These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

Olá amigo , eu enviei o pedido no seu email para receber o desenho do projeto . Ficarei muito grato pelo envio , muito obrigado pela atenção

Hello, I liked your 2 in 1 Scroll Saw & Jigsaw Table Could you please send me the "png with the new changes? best regards

우선 감사 의 말씀 드립니다 우연한 기회에 우드카빙 이란 동영상을 보고 지금 69살 인데도 만들수 있나 하다 해보자 조각을 전부터 해보고 싶었는데 .. 필요한 연장 또무었이 있나 허다가 동영상을 보고 만들고싶고 헌데 요놈의 LM8uu 라고하는 요놈 때문에 여기저기 물어 봐도 모른다 핸드폰으로 찍어서 관계 되는 공구상회가도 모른다 하기에 제주도는 이런게 없나보다 하고 육지가서 물어본다고 생각했지요 그러다 선생님의 동영상을 보다 이게 그것이구나 하고 만세 했지요 정말 고맙습니다 소원풀이 했어요 이제는 선생님작품을 만들어야지요 도면 부탁드립니다 . 잘만들겠습니다 montakdad@naver.com

@TreeAnWood

3 жыл бұрын

답글이 너무 과찬이셔서 몸둘바를 모르겠습니다. ^^ 도면을 지금 보내드렸습니다. 관심 가져주셔서 감사드립니다. 👍 다른 DIY도 많이 있으니 한번 구경오세요 ^^

Hola, me podrías enviar las imágenes? Saludos.

@TreeAnWood

2 жыл бұрын

If you leave your email address, i will send you the drawing file. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

Am from Gh, pls build one for me

Nic

I would prefer a strong metal arm over the wooden arm...

@TreeAnWood

3 жыл бұрын

That's good idea. :) Thanks for your interest.👍

I have sent an email for the drawing / plan for diy 2 in 1 jigsaw and scroll saw. Thanks

@TreeAnWood

2 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

Все очень круто. Молодцом. Чётко и правильно. Придумать бы ещё крепление под пилки (круглые) ручного лобзика, было бы просто кайф. А вопрос. Не могли бы вы скинуть чертежи на почту. Заранее спасибо. Так держать. t9010005071@yandex.ru

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

@user-jj7rm6mq1f

3 жыл бұрын

@@TreeAnWood Okay, thank you so much!!!

complimenti ,

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Fantástico 👍👍👍👏👏👏👏👏

Mi puoi mandare il disegno via imail grazie