Hi, my name's Andre, I'm from Brazil and I want to thank you for many project with Dwin. Your channel was very helpfull to me. Thanks!

@marcos1alexandre2

8 ай бұрын

olá andré, estou estudando essa tela, já tenho uma mas não estou conseguindo fazer aparecer na tela a leitura do sensor dht22, vc poderia me ajudar? rio de janeiro

@FRO2010fuz

28 күн бұрын

@@marcos1alexandre2 Tudo bem, Marcos? Conseguiu progredir com a tela? Posso te ajudar se quiser...

@marcos1alexandre2

28 күн бұрын

​@@FRO2010fuz muito obrigado por querer me ajudar mas ja consegui resolver o problema . Mas fico muito agradecido por tentar ajudar.

The Nextion Displays are WAY easier to use

@Deetalks87

Жыл бұрын

But sadly they are also like X4 the price... In my country the 2.8 dwin is 450, the 2.8 nextion is 2500...so over x5 in my case😢, I'd rather have 5 displays over 1 you know

@davi5music521

Жыл бұрын

Thats right, DWIN is cheap. App is hard at first time, then is Ok.

Hi. For me , Your article is very helpful. Now I understand DGUS logic. Only 10:50 You write VP 0x5000, next 19:13 You send data to address VP 0x5500. I'm using DMG10600T070_A5WTC. Thanks

@ForeverLearner-ms8ng

4 ай бұрын

I have same confusion. How is this working?

@ForeverLearner-ms8ng

4 ай бұрын

Ok, I checked this in project files, it is 5500 in the code as well.

I'm using GTKterm to send data over RS232. I'm sending byte by byte( 5A - Enter, A5 - Enter, ....)

great.is there any way to send & display text in DWIN from arduino? I can see text show text display in DGUS but have no idea how to send String as HEX bytes.

I'm using GIMP to create pictures. In GIMP You change target dimensions of icons.

how do we make tha esp32 data to show on dwin display

Hi, all works ok but the main screen BMP's do not load. ive tried puting the BMP's in folder and on the disk root but only loads the control function. any ideas and Thanks

Hello Friend, I need your help. I've being following your video So, the example is: Turn off and Turn on the led. When I start to try the serial port in the application, I push button (ON and OFF) on the display. The hexadecimal values I received are: ON: 2D 3E 55 FD FF FD 00 OFF: 2D 3E 55 FD FF FF 00 My Question is: Are the values correct? I have a doubt about that one. I hope your answer

Hello Sir, Why is my Data variables displayed incorrectly when I create an ICL file larger than 136Kb? Thanks

Well the price point is quite good compared to Nextion but programming is more primitive. Hope some one will make a library for it. Do you really need the expensive acessory kit to program it?

@SaravananAL

Жыл бұрын

Not necessary. You can very well connect TTL pins to your Microcontroller to program it. Or use an USB-TTL device to decode the HEX code at the port pins.

Hi i have an issue, on the terminal its send the correct string but five times instead of one, what might cause this issue?

Good afternoon, I have 2 pieces of such a display, one broke. How do I copy the program from the working display to my computer to flash it on the new display?

What is the max File size of 32.icl?

Sir, thank you very much for sharing you huge knowledge !!! You´re a very good Professor🙏!!!

thank you so much for such clear explanation sir

Thank you for wonderful explanation. If possible please do make video of read write and save arrays and pages functionality and keypad inputs also. Thank you

Hello, do you have the diagram connection wire with arduino mega 2560?

Seems they have removed the 0.1” header on Als version and changed it to a proprietary connector to make you buy the expensive kit.

Spot on ! Only one thing, after uploading code trough sd card, it booted up, but when I slide on the first screen it beeps but not going to second screen... any advice ? @Saravanan AL ?

hi saravanan ,Arduino codes cannot be accessed, I think the site is not working. How can we access the codes?

Hello Sir, Wanted to send RTC variable data of date and time, what will be the Hex code for the same ??? Please drop Hex code if anyone knows

Is it possible to to design a navigation system in DGUS if we want to use these displays for bike dashboard. If so Please help

Thz for videos, I need to display them from an SD card image. MC displays a BMP image. is it possible

Thanks for your wonderful video 👍

Maximum How many relays can be controlled with this module

how can i connect dmg80480c050_03wtr with Arduino or NodeMCU?

does return key control works for DMG80480C050_03WTR display?

Good effort...

MANY THANKS how its possible upload the video ???

in what program did you create the pictures? can the display be used at a height?

Hi Sir, i can't connect dwin display with Arduino

Hi sir you can help me with LCD screen Dwin and stepper motor I'm need cod

👏

Very helpful

Hello, nice explanation. Is possible use this arduino code for Mega 2560 ? Because Mega 2560 have more Tx/Rx pins. There, by my opinion, is needed setting Rx/Tx pins for the comunication in Arduino code. Or how recognize Arduino Mega, which Rx/Tx pins is use for comunications ? Thank you for understanding

@nelsongomez8547

9 ай бұрын

Hello friend, Did you can?

after plugging in SD card blue screen is not appearing and it is directly going to main screen , please help me

@yusufcebi2621

3 ай бұрын

You need to change your sd card it has to be compatible with the screen

Hello Friend, congrats for your video, it is very useful. Friend, do you have some video where you can send data from Arduino - To - Display and this data is shown in the screen. It is possible. Do you have some material? Regards Nelson

An error occurred while upgrading the screen and it became a black screen that does not work Can you help me to restart it DWIN LCD DMG80480C050_03WTR can you help me I can't find a way to reset the screen again

@kkrwawy5823

Жыл бұрын

Im sure that you can message to the hwin support with that problem

This is a greate work but I have question Can I make ten buttons in a display?

@SaravananAL

Жыл бұрын

Yes you can. Check out this video for 4 button , same procedure for 10 buttons kzread.info/dash/bejne/gpujrbhslLSnn7Q.html

@electronetiq

Жыл бұрын

@@SaravananAL Thanks for all

In 10:30 you put vb5000 and in 19:19 different its 5500 ... is it magic ?? 😂 VB different and work with you .. but 3 day am still trying its not working with me i do all same

@ForeverLearner-ms8ng

4 ай бұрын

I had similar doubt

@ForeverLearner-ms8ng

4 ай бұрын

Ok, I checked this in project files, it is 5500 in the code as well.