I would like to see how it does on a pure sine wave frequency lol. Because on those low frequency tone videos, it doesn't really contain pure sine wave frequency at all. It's more likely a combination of low and higher frequency bass, that's why you can hear the bass. But still, it's a very cool test!
@erikbritz8095
20 күн бұрын
@@experimenkun5794 this depends on which you choose plus i would have to input more power on a pure sine wave as we know their not as loud, i can redo this later on using FL Studio 🫡 but that might take a bit funds are low and i need a laptop for that job 🤣
@FPSzky
20 күн бұрын
@@erikbritz8095 FL Studio is really easy to run if you're doing that sort of stuff in it, i ran FL Studio 20 on a laptop from 2010 for a while and it did it no problem
@bubleman219620 күн бұрын
Use the frequency generator app on your phone if you have a audio jack to get a pure sinewave 1hz, not this 30hz with breaks. One amplitude was performed, but at 30hz with a bit of downtime.
@erikbritz8095
20 күн бұрын
Did you run it through a DAW to check the Frequency? If not then how is the claim of 30Hz accurate? No Hate its just easier to check with a DAW program however i'll redo this test in a week or two with a signal generator for fun. 🫡
@bubleman2196
20 күн бұрын
@@erikbritz8095 All I know is that one hertz ain't moving like that. Open any frequency generator and you see the wave is much slower. I just had a guess at the frequency. What was played there was a series of 20 or 30hz bursts, each long one pulse. So for example a 30hz burst playing for 33ms, then the cone has no movement. In a sinewave the speed of the cone is constant and only big rotary subwoofers can reproduce 1hz. Your cone area isn't anywhere near big enough to create sound pressure that you can feel/see. You also can't hear 1hz, only it's resonances reaching 15-20+hz
@erikbritz8095
20 күн бұрын
@@bubleman2196 Yes no the "Audible" side of this is port noise nothing more, but 30hz i dont think so...30hz does not peak in this space at all and sounds completely different. However i agree a tone generator or DAW played 1hz tone will be more accurate, but this is not 30hz, anyway though this is more for fun i have no intentions of doing Numbers at 1hz or anything like that our best with this exact box was 145DB@28hz we then swapped to a new box and more power and our best jumped to 147.9DB@25hz, lowest we ran the newer enclosure was 18hz where we did 140DB@18hz alby after demos etc. So infrasonics is possible just not loudly.
@bubleman2196
20 күн бұрын
@@erikbritz8095 damn, that thang a beast, but the actual 1hz would be onteresting
@erikbritz8095
20 күн бұрын
@@bubleman2196 yes im curious too sub does good on curtain shaker and Bass i love so 8hz is decent sadly in car this drops of wildly cause my car enjoys 35hz to 50hz more, the corsa is where we got so low in. 🫡
@Letsgetlow22 күн бұрын
Need to put it in a vehicle and see what it does
@erikbritz8095
22 күн бұрын
@@Letsgetlow we have we did a 145DB with this box and a 147.9DB@25hz with a different box. The vids are here on my channel of the x15 demoing. 🫡
@blyatmaen2101
20 күн бұрын
It does window removal
@erikbritz8095
20 күн бұрын
@@blyatmaen2101 Eish ja im breaking the Roof slowly in going to brace it soon and if all else works out ill get a single 18 inch sub in the office, Sundowns going in the car.
@MartoradGaming
20 күн бұрын
Instant windshield delete @@blyatmaen2101
@MyroGopy5 күн бұрын
What amplifier are you using to power the subwoofer
@erikbritz8095
5 күн бұрын
@@MyroGopy Hybrid B2400 Pro Audio Amplifier it provides 2x800watts Rms@8ohm 2x1200watts Rms@4ohm and 2x800watts@2ohms per channel as it is not stable at 2ohms so after rise im seeing between 400watts to 600watts as im only using a single channel on the Sundown X15. Upgrading amps in three months so that i can provide it with 2000watts post rise, thats bout a 3DB Gain more or less. 🫡
@MyroGopy
5 күн бұрын
@erikbritz8095 does the amplifier Clip when try to push the subwoofer at its limit
@erikbritz8095
5 күн бұрын
@@MyroGopy Yes, subs rated 2000watts Rms this amp is nowhere near what you need for a big boy subwoofer hence the upgrade to something 2ohm stable and with a good chunk of power more. Most guys do a car audio amp indoors i do PA due to my second business being PA work.
@MyroGopy
5 күн бұрын
@@erikbritz8095 use a car amplifier bro and a power supply 200 amp stepsom
@erikbritz8095
5 күн бұрын
@@MyroGopy nah it would be a waste of money right now later on i have an idea which car amp would do the job
Пікірлер: 23
I would like to see how it does on a pure sine wave frequency lol. Because on those low frequency tone videos, it doesn't really contain pure sine wave frequency at all. It's more likely a combination of low and higher frequency bass, that's why you can hear the bass. But still, it's a very cool test!
@erikbritz8095
20 күн бұрын
@@experimenkun5794 this depends on which you choose plus i would have to input more power on a pure sine wave as we know their not as loud, i can redo this later on using FL Studio 🫡 but that might take a bit funds are low and i need a laptop for that job 🤣
@FPSzky
20 күн бұрын
@@erikbritz8095 FL Studio is really easy to run if you're doing that sort of stuff in it, i ran FL Studio 20 on a laptop from 2010 for a while and it did it no problem
Use the frequency generator app on your phone if you have a audio jack to get a pure sinewave 1hz, not this 30hz with breaks. One amplitude was performed, but at 30hz with a bit of downtime.
@erikbritz8095
20 күн бұрын
Did you run it through a DAW to check the Frequency? If not then how is the claim of 30Hz accurate? No Hate its just easier to check with a DAW program however i'll redo this test in a week or two with a signal generator for fun. 🫡
@bubleman2196
20 күн бұрын
@@erikbritz8095 All I know is that one hertz ain't moving like that. Open any frequency generator and you see the wave is much slower. I just had a guess at the frequency. What was played there was a series of 20 or 30hz bursts, each long one pulse. So for example a 30hz burst playing for 33ms, then the cone has no movement. In a sinewave the speed of the cone is constant and only big rotary subwoofers can reproduce 1hz. Your cone area isn't anywhere near big enough to create sound pressure that you can feel/see. You also can't hear 1hz, only it's resonances reaching 15-20+hz
@erikbritz8095
20 күн бұрын
@@bubleman2196 Yes no the "Audible" side of this is port noise nothing more, but 30hz i dont think so...30hz does not peak in this space at all and sounds completely different. However i agree a tone generator or DAW played 1hz tone will be more accurate, but this is not 30hz, anyway though this is more for fun i have no intentions of doing Numbers at 1hz or anything like that our best with this exact box was 145DB@28hz we then swapped to a new box and more power and our best jumped to 147.9DB@25hz, lowest we ran the newer enclosure was 18hz where we did 140DB@18hz alby after demos etc. So infrasonics is possible just not loudly.
@bubleman2196
20 күн бұрын
@@erikbritz8095 damn, that thang a beast, but the actual 1hz would be onteresting
@erikbritz8095
20 күн бұрын
@@bubleman2196 yes im curious too sub does good on curtain shaker and Bass i love so 8hz is decent sadly in car this drops of wildly cause my car enjoys 35hz to 50hz more, the corsa is where we got so low in. 🫡
Need to put it in a vehicle and see what it does
@erikbritz8095
22 күн бұрын
@@Letsgetlow we have we did a 145DB with this box and a 147.9DB@25hz with a different box. The vids are here on my channel of the x15 demoing. 🫡
@blyatmaen2101
20 күн бұрын
It does window removal
@erikbritz8095
20 күн бұрын
@@blyatmaen2101 Eish ja im breaking the Roof slowly in going to brace it soon and if all else works out ill get a single 18 inch sub in the office, Sundowns going in the car.
@MartoradGaming
20 күн бұрын
Instant windshield delete @@blyatmaen2101
What amplifier are you using to power the subwoofer
@erikbritz8095
5 күн бұрын
@@MyroGopy Hybrid B2400 Pro Audio Amplifier it provides 2x800watts Rms@8ohm 2x1200watts Rms@4ohm and 2x800watts@2ohms per channel as it is not stable at 2ohms so after rise im seeing between 400watts to 600watts as im only using a single channel on the Sundown X15. Upgrading amps in three months so that i can provide it with 2000watts post rise, thats bout a 3DB Gain more or less. 🫡
@MyroGopy
5 күн бұрын
@erikbritz8095 does the amplifier Clip when try to push the subwoofer at its limit
@erikbritz8095
5 күн бұрын
@@MyroGopy Yes, subs rated 2000watts Rms this amp is nowhere near what you need for a big boy subwoofer hence the upgrade to something 2ohm stable and with a good chunk of power more. Most guys do a car audio amp indoors i do PA due to my second business being PA work.
@MyroGopy
5 күн бұрын
@@erikbritz8095 use a car amplifier bro and a power supply 200 amp stepsom
@erikbritz8095
5 күн бұрын
@@MyroGopy nah it would be a waste of money right now later on i have an idea which car amp would do the job