Thank you for doing this video

@MayoCarsDR

2 жыл бұрын

Thanks for comment and watching Video

Bro im Peterson from Haiti and i really like the way you work on,and that's why i've liked and subscribed to your channnel to watch more and more for more experiences

@MayoCarsDR

Жыл бұрын

Thanks for comment

Great video!

thank you so much for this job I love that job very much thanks

@MayoCarsDR

2 күн бұрын

You welcome

Thank you for doing this video

Great job and video

Perfect

Excelente mecánico.. que buen video 👍

@MayoCarsDR

Жыл бұрын

Thanks for comment

Hola amigo buen video saludos cordiales Caracas Venezuela 🇻🇪

@MayoCarsDR

2 жыл бұрын

Thanks for comment

Thanks !

@MayoCarsDR

2 жыл бұрын

You welcome

Great job sir thank you 😊

@MayoCarsDR

Жыл бұрын

You welcome

Very Good

@MayoCarsDR

Жыл бұрын

Thanks for comment

thanks, cheers from venezuela. Im working in this engine

@MayoCarsDR

2 жыл бұрын

Thanks for comment,ok

Am proud to see how setting timing. What defference between 1GR to 4GR

Thans you so much sir so good 👍♥️💜💚💚💙💯💯🌹🌹🌹🌹

@MayoCarsDR

8 ай бұрын

Thanks for comment dear

Thank you vary march

@MayoCarsDR

8 ай бұрын

You welcome Thanks for comment

How much was to rebuild the engine with all toyota original parts?

good job

@MayoCarsDR

Жыл бұрын

Thanks for comment

Very good ❤❤❤❤❤❤

@MayoCarsDR

Жыл бұрын

Thanks for comment

Nice

@MayoCarsDR

11 ай бұрын

Thanks

After you had the timing set, where do you position the timing to install the crank pulley at 0 or tdc?

@MayoCarsDR

Жыл бұрын

See this video sir kzread.info/dash/bejne/ZIOjj8-pmdvUmaQ.html

Nice video! Excellent work! I assume this is a non interference engine? Otherwise you would not be able to spin the camshaft around and around without hitting the pistons when the main timing chain has not been attached yet. Is my understanding correct?

@MayoCarsDR

Жыл бұрын

If you rotate the camshaft with the piston position at the top, they will touch the bearings, but if you position the piston at the bottom, they will not touch the bearings.

I hear if keep the oil Fresh ,Clean less chance the chain stretching. Is this so.?

I got the timing marks on the camshaft gears vs chain. However, it was not clear how you set "top dead center"? of the crankshaft to align with shaft gear sprocket. It seemed you probed while rotating crankshaft until probe was at it's highest point?

@MayoCarsDR

2 жыл бұрын

Yes

@MayoCarsDR

2 жыл бұрын

kzread.info/dash/bejne/ZIOjj8-pmdvUmaQ.html

@Balmy_Jones

2 жыл бұрын

@@MayoCarsDR Ah, yes, I see it now. Cyl 1 is at "Top Dead Center" of the compression stroke (all valves in closed position). Many thanks. (I have a 2016 4Runner, and may never need to rebuild the engine which now has 40,000 miles on the clock. But I am a Mechanical Engineer, and eat these videos for breakfast!)

@mikalcobbs9402

Жыл бұрын

Crankshaft has a dot on the reluctor wheel, there’s a line on the block it lines up with. Also the crank pulley has marks that line up with the mark on the timing cover, you have to pull the valve covers off to find tdc. When marks on the intake cam gears are lines up with marks on the cam caps for bank 1 and bank 2 and the crank pulley is at 0 tdc on the timing cover you’re at Cyl 1 tdc

When you did the idler pulley 1 top centre, did it have a lock pin to keep the oil injection in line? Need to know as I’m currently doing mine. Please help as I can not even find a lock pin and toyota are useless

@MayoCarsDR

2 ай бұрын

No

@MayoCarsDR

2 ай бұрын

Timing Marks kzread.info/dash/bejne/ZIOjj8-pmdvUmaQ.html

Hello. What type of seal packing do I need to use for the timing cover? The FSM calls for two different types. One for the water pump ports (08826-00100) and a different one (08826-00080) for the other areas. I have 00295-00103 which replaces 08826-00080. I don't have 08826-00100 for the water pump areas on the timing cover. Toyota sell this for $100 and it is not readily available at my local dealer. Is there an alternative that I can use for this area?

@MayoCarsDR

Жыл бұрын

00295-00103 This can be used everywhere

Bro kitna riyal kharcha aayege (including labour) for rebuilding... Mere pass same engine hei hei

Hi man i need help, can you please explain me clear the point off all motor and all well the valve timing

@MayoCarsDR

2 жыл бұрын

what can I help you

انا استطيع تجميعها بطريقة اسرع من ذالك واتقن ولكتي اقول احسنت

@MayoCarsDR

Жыл бұрын

Thanks for comment

Can you replace the camshaft tensioner with just the valve cover and exhaust sprocket removed?

@MayoCarsDR

2 жыл бұрын

Yes

@Skruteas

2 жыл бұрын

@@MayoCarsDR Thank you! Bad oil filter valve broke the guide in it. This will be a good temporary repair.

Photos came to Chittoor

Sir magtanong lng hard starting ang aking Van na 1KD Engine kpag lagyan ng konting ligther fluid andar xia at maayos ang andar kpag binitawan mo accelerator mmmatay start mo ulit kailangan ng Ligther fluid ulit ano kayang problem niya slmt

@MayoCarsDR

Жыл бұрын

Injector problems

Is this engine interference? Can the camshafts be rotated regardless of the position of the crankshaft?

@MayoCarsDR

Жыл бұрын

This engine is interference

Cuanta libras lleva el cigüeñal del Toyota 4.0 1GR

@MayoCarsDR

2 жыл бұрын

kzread.info/dash/bejne/p3xlu7WodJioiNY.html

Abone

Doing good job 👍 Bro where's your location !!?

@MayoCarsDR

2 жыл бұрын

Thanks for comment ,my location in Libya

How do you set the oil pump gears as in the 3 timing marks to crank position

@MayoCarsDR

2 жыл бұрын

There is no oil pump timing marks

@wrenchwork2958

2 жыл бұрын

@@MayoCarsDR ok thanks and what are the torque specs for the front cover bolts

En que pays trabajan gracias

@MayoCarsDR

2 жыл бұрын

Thanks for comment I am from Libya

My envie os not accelerate

Oh no you deny the block

Ap ka number or workshop kaha ha

@MayoCarsDR

Жыл бұрын

I am located in Libya

I need to send you my motor

@MayoCarsDR

2 жыл бұрын

Which motor do you have and where are you from?

Маслянный фильтр, который установили, не подходит под этот двигатель, в маркировке должна быть буква J перед 4.

Thank you for doing this video

@MayoCarsDR

2 жыл бұрын

You welcome