Sweet to see the FZ getting some love outside of the middle east

@kingofq5544

2 жыл бұрын

We love them very much in the middle east

I've seen these engines a lot on the sand dune climbs

Toyota's anti-barra 😁🤙🏾

@AgentRoadblock

Жыл бұрын

The jz family can honestly sit down , the 1fz is smacking that little cousin in check. Same with the TB engines compared to RBs for Nissan

I love when such pleasant mild mannered people have such crazy cars

Love that rotary purring away in the background

Take my hat off to the people that did this build. To enter fairly new Territory to immediately get results like world records. That's a friggin phenomenal achievement.

Wish more ECU development would be done specific to the 1fzfe. So easy to produce power with pretty low boost v

@reidonz5848

3 жыл бұрын

Whats so different about the 1fzfe that a normal aftermarket ecu cant control? Just curious.

@AccAkut1987

3 жыл бұрын

@@reidonz5848 nothing really, it's a pretty ordinary inline six, just a very sturdy one. Arabian guys started building them up like mad a while ago as they had lots of them around. Nothing magic in making any ECU work with them, just experience is probably rare still outside of Arabia.

@damonholmes9299

3 жыл бұрын

Im not sure what you mean exactly by ecu development? no ecu development needs to be done with this engine its like any other 6 cylinder, you wire in an aftermarket ecu and off you go?

@OFFTAPnz

3 жыл бұрын

@@damonholmes9299 its because people want plug and play because wiring hard

@j.barrett9424

3 жыл бұрын

Bruh. A fucking megasquirt could run that😂😂

0:44 How accurate do you want the EGT Readings? YES

@4wdaddict41

3 жыл бұрын

Right lol

What a fantastic 1FZFE build. Every time I see a video about this build I am amazed all over again!! Thanks for sharing!

@hpa101

2 жыл бұрын

Glad you enjoyed it!

No 2j, i like that lady 🤘

That's one beautiful head! The whole setup looks very clean.

Jesus that is such a well executed, clean engine. These folks are seriously good and hopefully they make a ton of cash and help push others to do as well!

Man , great questions all the info i was wondering about you nailed them. Thanks mate im really getting into your channel.

Quality car & Video production

awesome video as always

@hpa101

3 жыл бұрын

Thanks Antonis! Once again lucky that people like this find the time to chat to us - Taz.

Very nice.. First time seeing this engine, a nice 2j contender it surely is quick enough!🏁🏁🏁

Tuned by ShaneT at some point at the start

I absolutely LOVE the way they say "The One EF ZAY"

@chrisjohns9631

11 ай бұрын

How do you say eff?

That's a great build 💯👏🏾❤️ but that Rotary tho🔥🔥🔥 4:40

bob norwood did this on this engine for al anabi racing in dubai making 3000hp for sand drags, currently making one for a low buck shootout for hotrod tv.... 8k$ 1500+hp you will see it in under a year on tv...many people in on it...including a barra from aus!

gahhhdamnit, now those are going to go up in price

@michaelbarnett2077

3 жыл бұрын

Well quick buy them all up so you can make heaps of profit.

Hey there guys i love the video, and im now even more curious about the wastegate setup as its shrouded in mystery on this one, thanks

Vim pela retifica projeto 💪🏼

How was her twin turbo chev in the Gemini from years ago. built by justin from hps that car went 6s in sure .

White rice just took their record away this past weekend as the fasted 6 cylinder on radials

@hpa101

3 жыл бұрын

Nice! Great to see an active class. Excited to see how the Boost86 team get on with the turbo setup changes in the future to try retake that record back again eh! - Taz.

@ericlaferriere7092

3 жыл бұрын

You are correct !! We plan on dropping that record much further at FL2K and then MIR world cup 2021...great video of other successful racers around the world.

Is this the same motor ben bray has had for a while in his toyota solara ?

مكينة كروزر ٢٠٠٧💪🏼

Is it possible to swap 1fz-fe into gt86 in stock chassis? And if it possible how is the weight distribution will be Iam building a street racing gt86 with 1fz-fe t with sequential gear box

4:40 is that a rotary i hear?

This guy knows how to ask questions and if you don't know what you're talking about, he's gonna make you look dumb.

Did she say 900hp out of a 2.7?!!! Holy shit

Can't wait till I can do anything with my 1fz in California. Gonna smoke ppl in my 4 ton 80 series

Cargirls are a blessing✨

1fz the barra, killer.

I would definitely run a shield plate over the transmission. Incase of explosion!

@MrDOHC1JZ

3 жыл бұрын

It’s a SFI case, it doesn’t need one

Is it still using the stock block?

Always good to see women in motorsport!

Where can I get one of those valve covers?

Is this a stock block and head?

How hard would it be to get this engine in a VK commodore?? Not your exact psycho engine but a 1fzfe. Relatively easy? Or big structural changes you think?

@iiReaperz01

3 жыл бұрын

I have a turbo Barra in a VB Commodore. But the vids I am seeing of the 1fz Fe. Are absolutely insane. Love the engine and love what you guys have done with it.

@hpa101

3 жыл бұрын

I've never done an engine swap in a VK, but there has to be more room in there than an 86 so it would be pretty straight forward I would think. I'd start by seeing what size the Holden V8s they shoehorned into some of those is like size-wise by comparison personally - Taz.

@iiReaperz01

3 жыл бұрын

@@hpa101 thanks so much. Really appreciate you taking the time to provide a response. Keep up the epic content. Transferring of skills and knowledge from the professionals to the DIYers is wicked.

How many torque?

Just wondering who n where the motor was built as i have a land cruiser n looking for a bit more... Can you please help.

@redsballer1904

2 жыл бұрын

They can actually handle quite a bit of boost like 16lbs

Meanwhile Jonathan Ward from ICON 4X4 is replacing these with LS crate engines on his six figure Land Cruiser builds. I really wish he would keep them Toyota powered similar to his Coyote powered Bronco's and Hemi powered Derelict Chrysler's.

@trianggaindralukmana2184

3 жыл бұрын

The 1fz is not efficient engine and not as refined as modern LS engine. Meanwhile in race term, inline 6 layout make tuner easier to setup turbo etc. The FJ Company offer 1FZ to swap the fj40

I'd like to hear more info on the scissor arrangement for the cams because that is a very interesting thing the 1fz has

@RussellRobinson77

3 жыл бұрын

it's not just the Fz, many narrow valve angle Toyota DOHC heads (FE suffix not GE suffix) on engines such as the S, 3RZ I4s, UZ v8s, MZ v6s and I believe the GZ v12 have the same design

@hpa101

3 жыл бұрын

We do cover that using a 1UZ in a video somewhere. I'll drop the link in if I find it for you later, i think it is in one of the 'Today At HPA' vids - Taz.

@Degekoify

3 жыл бұрын

Pretty common in Toyota engines, the UZ and VZ range use the same thing.

@gregculverwell

3 жыл бұрын

As far as I know scissor cam drive is just for refinement (noise reduction), doubt that this motor is still using it.

I have that engine and I would have never thought this was possible, I wonder what the cost was?

@hpa101

3 жыл бұрын

With so much being custom, between 'quite a bit' and 'a lot' would be my guess. It's delivering the results for the team though eh :) - Taz.

@9mmSurpressor

3 жыл бұрын

Well into the 5 digit range I’m sure

@trianggaindralukmana2184

3 жыл бұрын

If you just keep stock 4.5 liter, kelford BC dkk still offer parts with reasonably price,. But this 86 isnt

@redsballer1904

3 жыл бұрын

Just turbo it stock, keep it 8-12lbs and you’ll be just fine and lots of power gains

i swear I've seem some one talking about this on an aussie channel but not in thus car

Trans set up please?????

Virgin 2JZ vs chad 1FZ

i have a 2rz turbo

Shame she didn't actually know much about the engine, that would've been really interesting

@jj205mi

3 жыл бұрын

She done well I think, put most people in front of a camera and they’d forget their name. I’d be the same

@christiaanroos4479

3 жыл бұрын

Not only didn't she not know about the engine but also not about the traction control. Hey not hating, the lady has a great hobby but clearly not enough technical knowledge to survive the questions from Andre.

Aussies, America’s closest relatives.

ahh jairão seu safado

Sorry, but that's not the worlds fastest and quickest import Radial car. Eric LaFerriere is in the White Rice 2jz powered Duy Bui owned X275 car. 6.39 @ 227 in the 1/4 mile

@hpa101

3 жыл бұрын

I'm waiting for someone to come see this comment in a year or two and correct you on the current record holder then 🤓 😅 - Taz.

I think she knows a lot but not everything about this engine. I think they should've put up someone that knows every inch of the engine.

Does the interviewer have aspergers? No hate just reminds me of a guy from love on the spectrum

@Lumiobyte

3 жыл бұрын

shane

@Lumiobyte

3 жыл бұрын

jasek

“Any issues with the scissor gear arrangement to adjust cam timing?” “ I don’t know, you have to ask a man.” Pathetic, that wasn’t a very technical question!