Thanks for the upload again lakay!

@asianmechanicguy6483

4 жыл бұрын

agyaman kabsat

Great Job!! However, I do recommend cleaning the new brake shoes and brake drums before final assembly. But, Still Well done. The drag on rotation seemed on point as well!!

@asianmechanicguy6483

Жыл бұрын

Thanks, will do!

I've done a lot of rear brake shoes in my day, but this vintage Honda is the absolute worst. The adjuster is virtually impossible to access from the rear backing plate, the top spring is a major pain. I give you props on that one.

@asianmechanicguy6483

3 жыл бұрын

Totally agree

@tiagofigueiredo2529

3 жыл бұрын

What about when the drum has a hedge and the shoes gets caught on that hedge and the drum doesn't want to come out?! 🤦‍♂️😅

@asianmechanicguy6483

3 жыл бұрын

@@tiagofigueiredo2529 if that happens expect to replace everything..so get a hammer or pull the drum by force u have no choice than to destroy it

@tiagofigueiredo2529

3 жыл бұрын

@@asianmechanicguy6483 Yeah, I know 😅🤣 Been there, experienced that 😂

@downhillskier7

3 жыл бұрын

@@tiagofigueiredo2529 remove plug on backing plate wind in adjuster with brake tool. Drums will have to machine to remove lip then measure min thickness before putting back on car. If drum is less than min thickness then purchase new drum.

Did not adjust brake shoes 😲

@asianmechanicguy6483

3 жыл бұрын

watch it again brother

My drum wont fit

@asianmechanicguy6483

3 жыл бұрын

i recommend you to replace ur brake with brand new brake shoe brake kit and brake drum in order to fit easily

Dapat bro ang tawag sayo is Pinoy Fixman kasi lahat kaya mong ayusin mapasasakyan at mga gamit sa bahay swerte ng asawa mo..hehe

@asianmechanicguy6483

4 жыл бұрын

Pwede bro. Kahit kc nung nasa pinas pa ako nakakapag repair ako ng mga motor ung tmx155 honda kaya kong baklasin un ..then nung pag punta ko dito canada andaming tinatapon dito bro na mga scooter washing machine lawn mower etc pag ayaw umandar tapon agad ilagay nila back alley at kinukuha ko naman at inaayos .Sayang ngalang dko pa alam ung youtube nung mga panahon na un..

@dantealbarado8643

4 жыл бұрын

@@asianmechanicguy6483 kaya pala inborn na pala ung pagiging mekaniko nu ..noon pa pala nagrerepair na kau ng mga motor at nung pumunta na kaya dyan sa canada pinagpatuloy nu lang anggaling pero dapat sir palitan nu na name ng channel nu dapat Pinoy Fixman nalang mas akama sa inyo